“Gel Elbow Pad” has been added to your cart. View cart
You may be interested in…
-

Gel Heel Cup
- Sold individually.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Gel Knee Crutch Pad
This product has multiple variants. The options may be chosen on the product page- Used to support leg on Knee Crutch, Lloyd Davies and Unaffected Leg Holders.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Gel Full Table Pad
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Vacuform Non Slip Foil
The secret of perfected adaption to the body by VACUFORM surgical mattresses is microballs of styrofoam, which are stabilised by vacuum to give a lasting, completely supportive form. Reducing the diameter of the filter balls by a fifth enables more precise adaption of the surgical mattress to the body. The MicroSpace system significantly increases the feeling of physical comfort for the patient compared to conventional fillings. Particularly during time-consuming operations or with patients who are older and in poor condition, there is a risk of pressure points leading to acute decubital ulcers and paresis (paralysis from nerve damage). The individual, ergonomic body adaptation of VACUFORM surgical mattresses effectively prevents such damage. The support pressure of the patient is optimally distributed over the whole body and thus reduced to a minimum. The microcirculation needed by the skin is unaffected. The patient has a noticeable feeling of comfort, lightness and warmth.This product has multiple variants. The options may be chosen on the product page- Prevents Vacuform mattress slipping in extreme angles.
- Easy to clean and reusable.
- Available as a roll, or a single piece.
- To be used underneath the Vacuform Bean Bags.
-



Lithotomy Leg Holders
- Stainless steel construction.
- Requires two size 16 clamps for mounting.
- Requires pads and straps, sold separately.
- Replacement pads and straps can be found here: Lithotomy Leg Holder Pads.
- Disposable Lithotomy Straps are recommended for the safe positioning of the patient.
- Sold in pairs.
-



Single Leg Prepper
- Stainless steel construction.
- Requires one size 16 clamp for mounting.
- Requires pad, sold separately. Replacement pads can be found here: Leg Prepper Pads.
-



Anti-Ligature Window Push/Pull Handle with Camlock
The Anti-Ligature Window Push/Pull Handle with Camlock provides a secure and reliable option for hinged windows. Featuring a solid 3mm cam arm, it offers security and control of the window opening. With keyed-alike keys for convenience, and the option to have unique keys for each window, it offers flexibility to suit your needs. Tested to Level A4 TS001 Grade. -



Utility Trolley
Australian Made 304 Grade Stainless Steel Trolley supplied with Polyethylene Bins. Measurements: 820mm(L) x 490mm(W) x 910mm(H). Bin Sizes: Top - 640mm(L) x 410mm(W) x 270mm(H) Bottom - 640mm(L) x 410mm(W) x 210mm(H) Castors: 4x 125mm Non-Locking Castors -



Hip Abduction Pillow
This product has multiple variants. The options may be chosen on the product page- Foam positioner designed for hip abduction positioning.
- Includes hook and loop straps, designed to wrap around the patient's legs and secure to the back of the pad.
-



Anti-Ligature Window Push/Pull Handle with Lifeline Key Locking
The Anti-Ligature Window Push/Pull Handle with Lifeline Key Locking is an excellent choice for hinged windows. Featuring the Lifeline Key system, it offers staff full control of window usage while ensuring safety. The universal Lifeline key is used on many products, including door locksets, vision panels, and anti-barricade stops and systems, making it easy to manage. The staff-only key reduces the risk of lost or stolen keys, and service users cannot block keyways, reducing maintenance costs. Tested to Level A4 TS001 Grade. -



Side Rail Kit
This product has multiple variants. The options may be chosen on the product page- Designed to suit Skytron 3600, 3500 and 6700 Series operating tables.
- Available for other table models. Contact us with your specific requirements.
-



Skytron Specific, Table Powered Lift Assisted Shoulder Chair
- One-touch beach chair positioning when used in conjunction with Skytron Operating Tables.
- Powered by leg/upper pins, removing the need for manual lifting.
- Articulation of 0-90 degrees.
- Double ball joint head support provides greater head maneuverability for patients with kyphosis.
- Full visibility of the patient's face when utilising Disposable Head and Chin Straps.
-



Gel Horseshoe Head Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -



Adjustable, Over-Rail Type Lift Assisted Shoulder Chair
- Pneumatic-assisted linear motion
- Adjusts to fit any operating table
- Lateral brace included
- Articulation of 0-90 degrees
- Designed to suit A size operating table side rails.
-



Elephants Trunk Pull Handle
The Elephants Trunk Pull Handle is a robust and solid cast product designed for applications where manual dexterity is a primary concern. Its sleek design provides a stylish alternative to the commonly known 'Witches Nose' handle. This handle comes in two back-plate options, the first being a flat plate for either new doors or retrofit applications, while the second is mounted on a recessed dish, providing more available space behind the handle but requiring more detailed door preparation prior to installation. Although not DHF TS001 compliant, it's suitable for applications where there is less challenging behaviour or installed with back-to-back bolt-through fixings. Its dimensions are 205mm x 90mm x 3mm, and it's tested to Level B4 TS001 Grade for anti-ligature purposes.This product has multiple variants. The options may be chosen on the product page -



2 Shelf Clearing Trolley
- Australian Made 304 Grade Stainless Steel Trolley with Two Shelves with double safety folds to all shelf edges, undershelf bracing and four precision ball bearing castors.
- Shelves: 50kg weight capacity per shelf.
- Castors: 4x 125mm Non-Locking Drawers.
-



Elevating Rotational Armboard
- One hand operated ball joint lock release.
- Limitless rotational capability.
- Ball joint of 38 degrees in any direction.
- Requires pad, pad sold separately. Replacement pads can be found here: Elevating Rotational Armboard Pad.
- Requires one size 17 radial clamp for mounting. We recommend using the Lock Lever, Radial, Direct On Clamp.
-



Bulk Collection Trolley
Australian Made 304 Grade Stainless Steel Trolley. Measurements: 900mm(L) x 600mm(W) x 950mm(H). Bottom Shelf: 50kg weight capacity. Castors: 4x 125mm Non-Locking Castors. -



Anaesthetic Trolley – Classic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 600mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 1x 250mm(D), 3x 125mm(D) Shelf: 50kg weight capacity Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -



3 Shelf Clearing Trolley
Australian Made 304 Grade Stainless Steel Trolley with two shelves with double safety folds to all shelf edges, undershelf bracing and four precision ball bearing castors. -



Gel Fracture Table Foot Pad
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Gel Foot Section Table Pad, No Cutout
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Gel Lithotomy Legholder Stirrup Pad
This product has multiple variants. The options may be chosen on the product page- For use with Lithotomy Leg Holders.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Resuscitation Trolley – Basic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 2x 125mm(D) Half Drawers Shelves: 50kg weight capacity per shelf Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -



Resuscitation Trolley – Classic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 2x 125mm(D) Half Drawers Shelves: 50kg weight capacity per shelf Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -



Gel Contoured Knee / Calf Positioner
- Contour 38mm deep.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Multi Drawer Trolley
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 900mm(L) x 490mm(W) x 900mm(H). Drawer Measurements: 4x 100mm(D), 2x 150mm(D). Shelf: 50kg weight capacity. Castors: 2x 125mm Non-Locking Castors on back. 2x 125mm Locking Castors on front. -



Gel Table Pad Head Section
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



List Cart
<ul><li>Australian Made 304 Grade Stainless Steel Trolley with hinged doors, concealed push handle, bumper surround andadjustable shelves.</li><li>Top Shelf: 50kg weight capacity</li><li>Castors: 4x 125mm Non-Locking Castors</li></ul>Measurements: 1200mm(L) x 600mm(W) x 1430mm(H) -



Gel Ulnar/Brachial Protector
- Protects the forearm, wraps around the patients arm and secures with hook and loop.
- Helps to prevent ulnar nerve damage when patient's arms are tucked to their sides.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Gel 3/4 Table Pad, with Cutout
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Gel Lateral Positioner
- Consists of a vinyl covered foam support with removable gel sheet.
- Protects arm and shoulder in lateral positioning.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Carbon Fibre Imaging Extension
- Radiolucent Imaging Extension to suit Skytron 3500, 3600, 6300 and 6700 Series, and Hipac 5801 Operating Tables.
- Requires Pad, sold separately.
- Clamp On Rail and Carbon Fibre Arm Surgery Board also available for use with the Carbon Fibre Imaging Extension.
-



Vitesse K6200 Anti-Ligature Window Curtain Tracking
The Vitesse K6200 is a lightweight, hand-drawn window curtain tracking system that delivers high performance. It is designed with roller runners, making it ideal for most applications. When paired with Kestrel magnetic load release brackets, the K6200 becomes an anti-ligature tracking system. This ensures that if an abnormal load is applied, such as an attempted ligature, it will release and eliminate any ligature points. The tracking can easily be refitted by placing it back onto the magnetic brackets. The system comes with white aluminum track, 16 roller runners per meter, and magnetic wall-fix or top-fix brackets as necessary, all spaced according to the manufacturer's recommendations. -



Hourglass Arm Table
- Radiolucent top.
- Height adjustable telescopic leg provides additional support.
- Requires two size 16 clamps for mounting.
- Requires pad, sold separately. Replacement pads can be found here: Hourglass Arm Table Pad.
-



3503 EZ Slide Operating Table
The 3503 EZ Slide has been specifically designed for surgical teams and is the most flexible, mid-range, general purpose theatre table used throughout Australian surgical facilities. Offering 530mm of top slide that is both convenient and easy to use, it allows for effortless movement of the patient through the imaging window at the touch of a button, facilitating imaging and surgical access. Additionally, this table features the highest height in our portfolio, standing tall at 1090mm, providing comfortable working access for a wide range of specialties. -



Surgical Arm Table
- Radiolucent top.
- Height adjustable telescopic leg provides additional support.
- Requires two size 16 clamp for mounting.
- Requires pad, pad sold separately. Replacement pads can be found here: Surgical Arm Table Pad.
-



Gel Table Pad Torso Section, with Cutout
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Stacking Interlocking Step Stools
Australian-made stackable 304 grade stainless steel step stools are designed to interlock with each other. Choose between rubber or aluminium tops. Available as single units or sets of 4. Replacement rubber feet are available. Measurements: Top: 453(L) x 302mm(W) Bottom: 493(L) x 342mm(W) Height: 120mmThis product has multiple variants. The options may be chosen on the product page -



Resuscitation Trolley – Deluxe
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 6x 125mm(D) Half Drawers, 1x 250mm(D) Full Width Drawer Shelf: 50kg weight capacity Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -



Leg Holder with Seamless Foam Pad
This product has multiple variants. The options may be chosen on the product page- Pair of leg holders with ball joint adjustment.
- Pads included.
- Requires two clamps for mounting.
-



Lift Assisted Leg Holders / Stirrups
- 270kg patient weight capacity.
- Gas lift assisted stirrups.
- 120 degrees boot rotation.
- Handle controlled abduction and adduction.
- Pad set included. Replacement pads can be found here: Stirrup Replacement Pads.
- Requires two size 33 clamps for mounting. We recommend using the Stirrup Clamp.
-



-



Gel Concave Armboard Pad
This product has multiple variants. The options may be chosen on the product page- Contoured for multi direction support.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Vacuform Bean Bags
The secret of perfected adaption to the body by VACUFORM surgical mattresses is microballs of styrofoam, which are stabilised by vacuum to give a lasting, completely supportive form. Reducing the diameter of the filter balls by a fifth enables more precise adaption of the surgical mattress to the body. The MicroSpace system significantly increases the feeling of physical comfort for the patient compared to conventional fillings.This product has multiple variants. The options may be chosen on the product page -



Trapezoid Positioner
- Vinyl covered foam.
- All seams chemically sealed.
-



Gel Head Rest Prone/Supine
- Aids in positioning patients with respiration tubes in place.
- Unique design provides superior head control stability.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Lightweight Leg Support
This product has multiple variants. The options may be chosen on the product page<ul><li>Designed to support the patients legs during transfer in and out of stirrups.</li><li>Manufactured to suit most tables, with options that slide over rails or insert into leg receptacles.</li><li>Weighs less than 5kg.</li><li>Includes replaceable vinyl cover. Replacement covers can be found here: <a href="https://staging.hipac.com.au/surgical-products/operating-theatre-tables-and-accessories/operating-table-accessories/replacement-pads/orthopaedic-lightweight-leg-support-pads-and-covers-2/">Lightweight Leg Support Pad</a>.</li><li>Custom Lightweight Leg Supports available. <a href="https://staging.hipac.com.au/contact-us/">Contact us</a> with your specific requirements.</li></ul> -



Disposable Patient Care Kit to suit Jackson Table
A complete, single use patient care kit designed for use with the Jackson Table. Manufactured in Australia, they minimise the risk of cross contamination and avoid extensive cleaning.This product has multiple variants. The options may be chosen on the product page -



Disposable Patient Care Kit to suit Wilson Frame
A complete, single-use patient care kit designed for use with the Wilson Table. Manufactured in Australia, they minimise the risk of cross-contamination and avoid extensive cleaning. The kit includes a full positioning kit, including:This product has multiple variants. The options may be chosen on the product page- Arm Cradles
- Anaesthetic Head Pillow
- Pad Sleeves
- Transverse Bar Pad
- Base Cover Drape
