May, 2023
Cart
You may be interested in…
-
Hourglass Arm Table
- Radiolucent top.
- Height adjustable telescopic leg provides additional support.
- Requires two size 16 clamps for mounting.
- Requires pad, sold separately. Replacement pads can be found here: Hourglass Arm Table Pad.
-
Standard Armboard
- Simple, easy to use design.
- Radiolucent top.
- Height adjustable.
- Requires one size 16 clamp for mounting.
- Requires pad, pad sold separately. Replacement pads can be found here: Standard Armboard Pad.
-
Gel Knee Crutch Pad
This product has multiple variants. The options may be chosen on the product page- Used to support leg on Knee Crutch, Lloyd Davies and Unaffected Leg Holders.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Gel Concave Armboard Pad
This product has multiple variants. The options may be chosen on the product page- Contoured for multi direction support.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -
Slip In Arm Support Pad
- Replacement Pad to suit Slip In Arm Support
-
J Arm Support
This product has multiple variants. The options may be chosen on the product page- Acrylic construction.
- Slips under table mattresses and is supported by the patients weight.
- Requires pad, pad sold separately. Replacement pads can be found here: J-Arm Support Pad.
-
Flush Pull Handle, Rectangle
Rectangular Flush Pull Handle, with a satin stainless steel finish and measuring 120mm x 40mm, is held in place with concealed screws. This recessed handle is available in a variety of shapes to fit your specific facility requirements, including round, square, and rectangular. -
Disposable Standard Armboard Pad
Manufactured in Australia from high-quality foam, these single use, non-sterile Standard Armboard Pads are the perfect option for busy environments, reducing the risk of cross contamination and avoiding the expense and time needed for cleaning. Supplied in a carton of 12 pairs of single use standard armboard pads, each pad measures 590mm (Length) x 190mm (Width) x 50mm (Height) and are designed to be used on a standard reusable table or positioning pads. As with all our disposable products, we can provide custom solutions to suit any need, please talk to us for further information. -
Disposable Heel Cup
An effective patient positioner that minimises the risk of cross contamination and avoids the expense and time of cleaning, the Hipac single use heel cup is non-sterile and perfect for high traffic environments. Made in Australia, they should be used with a standard reusable table or positioning pads and are offered in cartons of 24 pairs of single use heel cups. As with all our disposable products, we can provide custom solutions to suit any need, please talk to us for further information. -
Flush Pull Handle, Square
Square Flush Pull Handle measures 50mm on each side, providing a recessed design with a satin stainless steel finish that gives a sleek appearance. The handle is held in place with concealed screws for a clean and professional look. Choose from different shapes to fit your facility's requirements: Round, or Rectangle. -
Elevating Rotational Armboard
- One hand operated ball joint lock release.
- Limitless rotational capability.
- Ball joint of 38 degrees in any direction.
- Requires pad, pad sold separately. Replacement pads can be found here: Elevating Rotational Armboard Pad.
- Requires one size 17 radial clamp for mounting. We recommend using the Lock Lever, Radial, Direct On Clamp.
-
Disposable Stacked Head Ring
Designed for use with standard reusable tables or positioning pads, the Hipac single use, non-sterile stacked head rings are manufactured in Australia from high quality foam materials. As single use items, they minimise the risk of cross contamination and avoid the time and expense of cleaning for rapid turnaround of equipment. Supplied in a carton of 12 single use attacked head rings, they are ideal for any medical facility. -
Hipac Anti-Ligature Roller Blind System
Hipac's Anti-Ligature Roller Blind System offers a safe and durable solution for facilities in need of ligature-free options. With the slow-rise mechanism, the blinds open smoothly, while the magnetic suspension brackets eliminate any potential ligature points. The system can be easily refitted after any abnormal load is detected, ensuring continued safety and security. -
Straight Lateral Support Pads
This product has multiple variants. The options may be chosen on the product page- Replacement pad made to suit Straight Lateral Support and Straight Lateral Support, Short Plate.
- Vinyl-covered foam.
-
Slip In Side Support
- Mounts behind the side rail of the operating table.
- Requires pad, pad sold separately. Replacement pads can be found here: Slip in Side Support Pad.
-
Emergency Pull Handle
The Emergency Pull Handle is a vital accessory in any healthcare facility with anti-barricade doors. It provides additional grip to overcome any internal force generated by a patient holding the handle from the inside of the door, preventing clinical staff access. By sliding the Emergency Pull Handle over the pinch grip handle, the door can be opened outwardly by pulling it. The length of the handle is designed to allow multiple staff members to participate in pulling the door, ensuring swift entry to the barricaded room. The Emergency Pull Handle is compatible only with 729 handles. -
Tubular Body Support
- Simple vertical and horizontal adjustment.
- Requires one Size 34 Clamp for mounting
- Requires pad. Pad sold separately. Replacement pads can be found here: Tubular Body Support Pads.
-
Anaesthetic Screen Support Pad
- Replacement pad to suit Anaesthetic Screen Support
- Seamless vinyl covering.
-
Contour Anti-Ligature 90 Degree Grab Rail, 700mm x 900mm
The Contour Anti-Ligature Grab Rail is designed to be free of ligature points whether installed vertically or horizontally. It features a sloping cap on one end to prevent anything from being looped completely around the rail. The open end of the rail allows for easy drainage, which eliminates hygiene and infection control issues typically associated with traditional infilled rails. This grab rail is 700mm x 900mm in size.This product has multiple variants. The options may be chosen on the product page -
Kestrel Soap Dish – White Plastic
The Kestrel Soap Dish in white plastic is a practical and secure choice for environments where there is a risk of self-harm. Its magnetic wall-mounted bracket is designed to release the soap dish in the event of an abnormal load, allowing it to drop away. Once the incident has passed, the dish can be quickly and easily reattached to the bracket. This product provides a straightforward and efficient solution to minimize the risk of harm in any setting. -
Curved Lateral Support Pad
- Replacement pad made to suit Curved Lateral Support, Curved Support and Curved Support Non-Rotating.
- Vinyl-covered foam.
-
Right Angle Arm Support
This product has multiple variants. The options may be chosen on the product page- Aluminium or acrylic construction.
- Slips under table mattresses and is supported by the patients weight.
- Requires pad, pad sold separately. Replacement pads can be found here: Right Angle Arm Support Pad.
-
Recessed Anti-Ligature Pull Handle
The Recessed Anti-Ligature Pull Handle is a compact option from the Primera pull handle range, measuring only 90mm x 106mm and constructed from 3mm solid steel. The '726' handle is suitable for a variety of applications, from cupboards to doors in units with challenging behaviour, due to its lack of protrusions. It meets the requirements of TS001 at level 4 and is available in Satin Stainless Steel electro-plated finish as a standard product, with other finishes available upon request. The handle is also supplied with pin torx anti-tamper fixing screws for added security. -
Wide Lateral Support Pads
This product has multiple variants. The options may be chosen on the product page- Made to suit Wide Lateral Support.
- Two pad types available: flat or curved.
- Seamless vinyl-covered foam.
-
Elephants Trunk Pull Handle
The Elephants Trunk Pull Handle is a robust and solid cast product designed for applications where manual dexterity is a primary concern. Its sleek design provides a stylish alternative to the commonly known 'Witches Nose' handle. This handle comes in two back-plate options, the first being a flat plate for either new doors or retrofit applications, while the second is mounted on a recessed dish, providing more available space behind the handle but requiring more detailed door preparation prior to installation. Although not DHF TS001 compliant, it's suitable for applications where there is less challenging behaviour or installed with back-to-back bolt-through fixings. Its dimensions are 205mm x 90mm x 3mm, and it's tested to Level B4 TS001 Grade for anti-ligature purposes.This product has multiple variants. The options may be chosen on the product page -
Gel Lateral Positioner
- Consists of a vinyl covered foam support with removable gel sheet.
- Protects arm and shoulder in lateral positioning.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Stacking Interlocking Step Stools
Australian-made stackable 304 grade stainless steel step stools are designed to interlock with each other. Choose between rubber or aluminium tops. Available as single units or sets of 4. Replacement rubber feet are available. Measurements: Top: 453(L) x 302mm(W) Bottom: 493(L) x 342mm(W) Height: 120mmThis product has multiple variants. The options may be chosen on the product page -
Gel Ulnar/Brachial Protector
- Protects the forearm, wraps around the patients arm and secures with hook and loop.
- Helps to prevent ulnar nerve damage when patient's arms are tucked to their sides.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Round Bar Clamps
Operating theatre tables are fitted with side rails to which positioning equipment is attached. These rails range in size according to their make and origin. In order to achieve stable positioning, the correct sized clamp must be used.This product has multiple variants. The options may be chosen on the product page- Accepts up to size 16 round post.
- Stainless steel construction.
- Clamps to suit A side Surgical Table side rails are direct-on where slots are fitted in side rails.
-
Surgical Arm Table
- Radiolucent top.
- Height adjustable telescopic leg provides additional support.
- Requires two size 16 clamp for mounting.
- Requires pad, pad sold separately. Replacement pads can be found here: Surgical Arm Table Pad.
-
Vitesse K6200 Anti-Ligature Window Curtain Tracking
The Vitesse K6200 is a lightweight, hand-drawn window curtain tracking system that delivers high performance. It is designed with roller runners, making it ideal for most applications. When paired with Kestrel magnetic load release brackets, the K6200 becomes an anti-ligature tracking system. This ensures that if an abnormal load is applied, such as an attempted ligature, it will release and eliminate any ligature points. The tracking can easily be refitted by placing it back onto the magnetic brackets. The system comes with white aluminum track, 16 roller runners per meter, and magnetic wall-fix or top-fix brackets as necessary, all spaced according to the manufacturer's recommendations.
