May, 2023
Cart
You may be interested in…
-
Vacuform Non Slip Foil
The secret of perfected adaption to the body by VACUFORM surgical mattresses is microballs of styrofoam, which are stabilised by vacuum to give a lasting, completely supportive form. Reducing the diameter of the filter balls by a fifth enables more precise adaption of the surgical mattress to the body. The MicroSpace system significantly increases the feeling of physical comfort for the patient compared to conventional fillings. Particularly during time-consuming operations or with patients who are older and in poor condition, there is a risk of pressure points leading to acute decubital ulcers and paresis (paralysis from nerve damage). The individual, ergonomic body adaptation of VACUFORM surgical mattresses effectively prevents such damage. The support pressure of the patient is optimally distributed over the whole body and thus reduced to a minimum. The microcirculation needed by the skin is unaffected. The patient has a noticeable feeling of comfort, lightness and warmth.This product has multiple variants. The options may be chosen on the product page- Prevents Vacuform mattress slipping in extreme angles.
- Easy to clean and reusable.
- Available as a roll, or a single piece.
- To be used underneath the Vacuform Bean Bags.
-
Form-A-Screen
- Flexible anaesthetic screen, shapes into any configuration.
- Requires two size 16 clamps for mounting.
-
Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -
Unaffected Leg Holder
- To suit Amsco/Steris and 777 Orthopaedic Traction Frames.
- Requires pad, pad sold separately. Replacement pads can be found here: Unaffected Leg Holder Pad.
-
Side Rail Kit
This product has multiple variants. The options may be chosen on the product page- Designed to suit Skytron 3600, 3500 and 6700 Series operating tables.
- Available for other table models. Contact us with your specific requirements.
-
Gel Prone Headrest with Interchangeable Base
- Including three different heights to provide more customised positioning.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Orthopaedic Lightweight Leg Support
- Radiolucent carbon fibre construction.
- Designed to suit Amsco / Steris 777 orthopaedic traction frames.
- Requires pad, pad sold separately. Replacement pad can be found here: Orthopaedic Lightweight Leg Support Pads.
- Includes Cover. Replacement Covers can be found here: Orthopaedic Lightweight Leg Support Cover
-
-
Jaw Elevation Device (JED)
- Maintains an open airway in sedated or anesthetised patients without the need for airway instrumentation.
- Frees medical personnel from the need to hold the jaw manually in sedated or obtunded patients.
- When left in place after a procedure, reduces post-operative airway complications.
- Non-invasive and easy to apply.
- Provides reusable head support, eliminating the need for blankets, towels or donuts.
-
Orthopaedic Sacral Rest
This product has multiple variants. The options may be chosen on the product page- Designed to suit Amsco/Steris and 777 orthopaedic traction frames.
- Radiolucent carbon fibre construction.
- Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Sacral Rest Pad.
-
Prone Anaesthetic Pillow
- Designed to provide support for prone positioning, allowing for safe positioning of intubated patients.
- Twin layered foam with soft vinyl cover.
-
Disposable Body Support Roll
A single use, non-sterile body support roll manufactured in Australia from high quality foam. Avoiding the risk of cross contamination and the time and expense of cleaning maintenance, they are perfect for busy theatres and offer an economical alternative. Supplied in a carton of 12 singe use body support rolls, each roll is 450mm (Length) x 175mm (Diameter). -
Disposable Patient Care Kit to suit Wilson Frame
A complete, single-use patient care kit designed for use with the Wilson Table. Manufactured in Australia, they minimise the risk of cross-contamination and avoid extensive cleaning. The kit includes a full positioning kit, including:This product has multiple variants. The options may be chosen on the product page- Arm Cradles
- Anaesthetic Head Pillow
- Pad Sleeves
- Transverse Bar Pad
- Base Cover Drape
-
Disposable Stacked Head Ring
Designed for use with standard reusable tables or positioning pads, the Hipac single use, non-sterile stacked head rings are manufactured in Australia from high quality foam materials. As single use items, they minimise the risk of cross contamination and avoid the time and expense of cleaning for rapid turnaround of equipment. Supplied in a carton of 12 single use attacked head rings, they are ideal for any medical facility. -
Disposable Patient Care Kit to suit Jackson Table
A complete, single use patient care kit designed for use with the Jackson Table. Manufactured in Australia, they minimise the risk of cross contamination and avoid extensive cleaning.This product has multiple variants. The options may be chosen on the product page -
-
Disposable Face Rest Covers to suit Epidural Positioning Device
Our Sani-Cover Medical Grade Disposable Face Rest Covers are designed for use with our Epidural Positioning Device (EPD) or for any crescent-shaped face rest cushion. The 25 gsm, spunbound fabric provides a comfortable, sanitary barrier for the face during care and treatment. Latex-free elastic ensures the cover remains in place but allows for quick and easy changeover between patients. The Face Rest Covers also fit the Epidural Positioning Device (EPD) arm rest. Sold in packs of 50. -
Disposable Body Support Bolster
A single use, non-sterile body support bolster manufactured in Australia from high quality foam. Avoiding the risk of cross contamination and the time and expense of cleaning maintenance, they are perfect for busy theatres and offer an economical alternative. Supplied in a carton of 12 singe use body support bolsters, each is 450mm (Length) x 175mm (Diameter) x 88mm (Height). -
Traction Assembly
<ul><li>To suit Amsco Steris and 777 orthopaedic traction frames.</li><li>Size 35 post.</li></ul>
