May, 2023
Cart
You may be interested in…
-
HD Wireless Transmitter and Receiver
A common issue faced by theatre staff is that digital displays have too many cross-room cables which often creates limited flexible equipment layouts. The wireless transmitter and receiver enables video carts to be completely mobile. Fewer cords on the floor can also eliminate tripping hazards. This device also eliminates the need to connect and disconnect cables, ultimately increasing the speed and efficiency of the turn-around time in the operating theatre. KEY FEATURES- HD Video transmission without compression.
- No lag or stall.
- Encrypted signal.
- Units can mount to the top or sides of a display monitor.
-
Disposable Operating Table Cover
A single-use, non-sterile operating table cover that is designed to fit most makes and models of operating theatre tables. It offers comprehensive protection from surgical fluids for the table and offers more efficient, hygienic clean-up after use. It fits under positioning and other surgical accessories so that it doesn’t hinder the functionality of the table, or any other surgical equipment being used. Manufactured in Australia, they are offered in a carton of 30 single-use operating table covers. -
Nestable Table (Large)
Australian Made 304 Grade Stainless Steel Table with four precision ball bearing castors. Designed to fit over our Small and Medium Nestable Tables for a compact and modular storage solution in the Nestable Tables Set. Measurements: 1000mm(L) x 600mm(W) x 900mm(H). Shelf: 50kg weight capacity -
Gel Full Table Pad
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Disposable Body Support Roll
A single use, non-sterile body support roll manufactured in Australia from high quality foam. Avoiding the risk of cross contamination and the time and expense of cleaning maintenance, they are perfect for busy theatres and offer an economical alternative. Supplied in a carton of 12 singe use body support rolls, each roll is 450mm (Length) x 175mm (Diameter). -
Lift Assisted Leg Holders / Stirrups
- 270kg patient weight capacity.
- Gas lift assisted stirrups.
- 120 degrees boot rotation.
- Handle controlled abduction and adduction.
- Pad set included. Replacement pads can be found here: Stirrup Replacement Pads.
- Requires two size 33 clamps for mounting. We recommend using the Stirrup Clamp.
-
Gel Flat Bottom Chest Rolls
This product has multiple variants. The options may be chosen on the product page- Used to protect the patients chest while in prone position.
- Also used for a variety of positioning needs including oblique and lateral stabilisation.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Patient Support Wedges
This product has multiple variants. The options may be chosen on the product page- Vinyl covered foam.
- All seams chemically sealed.
- Custom options available, including size, colour, density, etc. Contact us for more information.
-
Universal Stirrup Trolley
- Stainless Steel construction with a polymer base.
- Accepts most brands of lift assisted leg holders.
- Holds one pair of leg holders.
-
Nestable Table (Medium)
Australian Made 304 Grade Stainless Steel Table with four precision ball bearing castors. Designed to fit between our Large and Small Nestable Tables for a compact and modular storage solution in the Nestable Tables Set. Measurements: 940mm(L) x 510mm(W) x 870mm(H) Shelf: 50kg weight capacity. -
Cardiac Head Pillow
This product has multiple variants. The options may be chosen on the product page- Memory foam top with comfort series vinyl.
-
Disposable Patient Care Kit to suit Wilson Frame
A complete, single-use patient care kit designed for use with the Wilson Table. Manufactured in Australia, they minimise the risk of cross-contamination and avoid extensive cleaning. The kit includes a full positioning kit, including:This product has multiple variants. The options may be chosen on the product page- Arm Cradles
- Anaesthetic Head Pillow
- Pad Sleeves
- Transverse Bar Pad
- Base Cover Drape
-
Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -
Donut Head Ring
This product has multiple variants. The options may be chosen on the product page- Seamless vinyl coated foam head ring.
-
Gel Locking Armboard Pad
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Nestable Tables Set
Set of 3 Australian Made 304 Grade Stainless Steel Tables with four precision ball bearing castors (per trolley). Shelf: 50kg weight capacity. Measurements: 1x Large - 1000mm(L) x 600mm(W) x 900mm(H) 1x Medium - 940mm(L) x 510mm(W) x 870mm(H) 1x Small - 760mm(L) x 500mm(W) x 830mm(H) -
Gel Donut Head Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Hourglass Arm Table
- Radiolucent top.
- Height adjustable telescopic leg provides additional support.
- Requires two size 16 clamps for mounting.
- Requires pad, sold separately. Replacement pads can be found here: Hourglass Arm Table Pad.
-
Single Leg Elevation Pad
- Constructed from foam and standard series vinyl
-
Disposable Stacked Head Ring
Designed for use with standard reusable tables or positioning pads, the Hipac single use, non-sterile stacked head rings are manufactured in Australia from high quality foam materials. As single use items, they minimise the risk of cross contamination and avoid the time and expense of cleaning for rapid turnaround of equipment. Supplied in a carton of 12 single use attacked head rings, they are ideal for any medical facility. -
Two Piece Laminectomy Rest
- Vinyl covered positioning device.
- Contoured support, shaped to assist in prone patient positioning.
- Vinyl covered foam.
- All seams chemically sealed.
-
Gel Lithotomy Legholder Stirrup Pad
This product has multiple variants. The options may be chosen on the product page- For use with Lithotomy Leg Holders.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Curved Lateral Support, Non-Rotating
This product has multiple variants. The options may be chosen on the product page- 150mm horizontal slide.
- Will not pivot during surgery.
- Requires one clamp for mounting.
- Requires pad. Pad sold separately. Replacement pads can be found here: Curved Lateral Support Non-Rotating Pads.
-
Lithotomy Leg Holders
- Stainless steel construction.
- Requires two size 16 clamps for mounting.
- Requires pads and straps, sold separately.
- Replacement pads and straps can be found here: Lithotomy Leg Holder Pads.
- Disposable Lithotomy Straps are recommended for the safe positioning of the patient.
- Sold in pairs.
-
Gel Foot Section Table Pad, No Cutout
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Surgical Arm Table
- Radiolucent top.
- Height adjustable telescopic leg provides additional support.
- Requires two size 16 clamp for mounting.
- Requires pad, pad sold separately. Replacement pads can be found here: Surgical Arm Table Pad.
-
Lateral Hip Positioner
- Patient positioning device designed to assist the surgical team correctly position patient for hip surgery.
- Full stainless steel construction, with vinyl covered foam pads with integrated lateral end stops.
- Horizontal and vertical adjustment.
- Requires two size 16 clamps.
- Direct-on pads are included. Replacement pads can be found here: Lateral Hip Positioner Pads.
-
Epidural Positioning Device (EPD)
The Epidural Positioning Device commonly known as the EPD, is a revolutionary device for positioning patients safely and securely during epidural procedures. -
Disposable Patient Care Kit to suit Jackson Table
A complete, single use patient care kit designed for use with the Jackson Table. Manufactured in Australia, they minimise the risk of cross contamination and avoid extensive cleaning.This product has multiple variants. The options may be chosen on the product page -
Gel 3/4 Table Pad, with Cutout
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Gel Fracture Table Foot Pad
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
31.5″ 4K OLED UHD Medical Display
Featuring OLED technology, this monitor delivers true blacks, better contrast, power efficiency, and a lightweight design. Compatible with specialised visualisation equipment perfect for use in operating rooms and surgical suites. Designed to be easy to use with complete control over image characteristics and multi-window layouts. -
Disposable Body Support Bolster
A single use, non-sterile body support bolster manufactured in Australia from high quality foam. Avoiding the risk of cross contamination and the time and expense of cleaning maintenance, they are perfect for busy theatres and offer an economical alternative. Supplied in a carton of 12 singe use body support bolsters, each is 450mm (Length) x 175mm (Diameter) x 88mm (Height). -
Jaw Elevation Device (JED)
- Maintains an open airway in sedated or anesthetised patients without the need for airway instrumentation.
- Frees medical personnel from the need to hold the jaw manually in sedated or obtunded patients.
- When left in place after a procedure, reduces post-operative airway complications.
- Non-invasive and easy to apply.
- Provides reusable head support, eliminating the need for blankets, towels or donuts.
-
Curved Support
This product has multiple variants. The options may be chosen on the product page- Requires one clamp for mounting.
- Requires pad. Pad sold separately. Replacement pads can be found here: Curved Support Pads.
-
Curved Lateral Support
This product has multiple variants. The options may be chosen on the product page- Adjusts vertically and horizontally.
- Requires one clamp for mounting.
- Requires pad. Pad sold separately. Replacement Pads can be found here: Curved Lateral Support Pad.
-
Gillespie Pillow
- Vinyl-covered foam positioning device.
- Contoured support, shaped to assist in prone patient positioning.
- All seams are chemically sealed.
-
Anaesthetic Pillow
- Vinyl covered with chemically sealed seams.
-
Mayo Table – Raised 3 Leg Base
Australian Made 304 Grade Stainless Steel Mayo Table with Two Leg Flat Base. Adjustable Height: 820 - 1120mm Tray Size: 560(L) x 410mm(W) Castors: 2x 50mm Non-Locking Castors -
Gel Heel Cup
- Sold individually.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Lateral Arm Support
- Adjusts vertically and horizontally, slides, tilts and rotates.
- Requires one size 16 clamp for mounting.
- Requires pad, pad sold separately. Replacement pads can be found here: Lateral Arm Support Pad.
-
Adjustable Mayfield Adaptor
- Adaptor to attach Mayfield head frame to operating table.
- Slides over side rails.
- Locks securely in place with wrist screws.
-
Ophthalmic Head Section
This product has multiple variants. The options may be chosen on the product page- Provides clear access for seated surgeons.
- Attaches to table head section receptacles.
- Stainless steel and aluminium construction.
- Manufactured to suit most brand of operating tables.
- Requires pad, pad sold separately. Replacement pads can be found here: Ophthalmic Head Section Pad.
-
Lightweight Leg Support
This product has multiple variants. The options may be chosen on the product page<ul><li>Designed to support the patients legs during transfer in and out of stirrups.</li><li>Manufactured to suit most tables, with options that slide over rails or insert into leg receptacles.</li><li>Weighs less than 5kg.</li><li>Includes replaceable vinyl cover. Replacement covers can be found here: <a href="https://staging.hipac.com.au/surgical-products/operating-theatre-tables-and-accessories/operating-table-accessories/replacement-pads/orthopaedic-lightweight-leg-support-pads-and-covers-2/">Lightweight Leg Support Pad</a>.</li><li>Custom Lightweight Leg Supports available. <a href="https://staging.hipac.com.au/contact-us/">Contact us</a> with your specific requirements.</li></ul> -
Small Instrument Trolleys with Rails
Our Australian-made instrument trolley is crafted from durable 304 grade stainless steel and features four precision ball bearing castors for smooth mobility. You have the option to choose from models with or without side rails, as well as with or without a bottom shelf. Each shelf has a weight capacity of 50kg, providing ample support for your equipment and supplies.This product has multiple variants. The options may be chosen on the product page -
Straight Lateral Support Pads
This product has multiple variants. The options may be chosen on the product page- Replacement pad made to suit Straight Lateral Support and Straight Lateral Support, Short Plate.
- Vinyl-covered foam.
-
Gel Epidural Positioning Device Arm Rest Pad
- Latex & Silicone Free.
- Anti-Bacterial & Anti-Microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aids in Pressure Redistribution.
-
Heavy Duty Lift Assisted Leg Holders / Stirrups
- 360kg patient weight capacity.
- Gas lift assisted stirrups.
- 120 degree boot rotation.
- Handle controlled abduction and adduction.
- Pad set included. Replacement pads can be found here: Stirrup Replacement Pads.
- Requires two size 33 clamps for mounting. We recommend using the Stirrup Clamp.
-
Prone Arm Support
- Fully radiolucent.
- Requires two pads, pads sold separately. Replacement pads can be found here: Prone Arm Support Pad.
-
Mayfield Adaptor
- Adaptor to attach Mayfield Head Frame to 3500, 3600, 6700 and 5801 Series Operating Tables.
- Slides into head or leg receptacles.
- Can be manufactured to suit most makes/models of operating tables. Contact us with your specific requirements.
-
Accessory Storage Trolley
- Designed to store table accessories in pre-configured locations.
- Positioning devices stored in base or attached via clamps.
- A size rails as standard. Can be manufactured to suit any rail size and storage requirements. Contact us with your specific requirements.
