May, 2023
Cart
You may be interested in…
-
CLIK Load Release Semi Circular Shelf
The Clik Load Release Semi-Circular Shelf is a convenient solution that is designed to prevent ligature risks. When abnormal loads are applied, such as attempted ligatures, the brackets are specifically designed to release the shelf to drop away, preventing a successful ligature. Once the event has passed, the shelf can be reattached by simply pushing it back into the corresponding brackets. The brackets feature heat-treated stainless steel spring clips that allow the product to release and reattach repeatedly without any decline in safety or performance. Made from 8mm polycarbonate with chamfered edges and rounded corners, this shelf is a reliable and safe addition to any mental health facility. -
HD Wireless Transmitter and Receiver
A common issue faced by theatre staff is that digital displays have too many cross-room cables which often creates limited flexible equipment layouts. The wireless transmitter and receiver enables video carts to be completely mobile. Fewer cords on the floor can also eliminate tripping hazards. This device also eliminates the need to connect and disconnect cables, ultimately increasing the speed and efficiency of the turn-around time in the operating theatre. KEY FEATURES- HD Video transmission without compression.
- No lag or stall.
- Encrypted signal.
- Units can mount to the top or sides of a display monitor.
-
Adjustable Shoulder Rests
This product has multiple variants. The options may be chosen on the product page- Set of shoulder rests designed to prevent patient slide when in Trendelenburg.
- Seamless direct-on pads included. Replacement pads can be found here: Adjustable Shoulder Rest Pads.
- Requires two clamps for mounting.
-
Straight Lateral Support Pads
This product has multiple variants. The options may be chosen on the product page- Replacement pad made to suit Straight Lateral Support and Straight Lateral Support, Short Plate.
- Vinyl-covered foam.
-
Kestrel Load Release Polycarbonate Towel Rail Set
The Kestrel Load Release Polycarbonate Towel Rail Set offers a unique safety feature that sets it apart from traditional towel rails. With magnetic brackets, it can release and drop away in the event of an attempted ligature, preventing harm. The clear polycarbonate tube also minimizes the risk of it being used as a weapon or to hide contraband. -
Recessed Anti-Ligature Pull Handle
The Recessed Anti-Ligature Pull Handle is a compact option from the Primera pull handle range, measuring only 90mm x 106mm and constructed from 3mm solid steel. The '726' handle is suitable for a variety of applications, from cupboards to doors in units with challenging behaviour, due to its lack of protrusions. It meets the requirements of TS001 at level 4 and is available in Satin Stainless Steel electro-plated finish as a standard product, with other finishes available upon request. The handle is also supplied with pin torx anti-tamper fixing screws for added security. -
Elephants Trunk Pull Handle
The Elephants Trunk Pull Handle is a robust and solid cast product designed for applications where manual dexterity is a primary concern. Its sleek design provides a stylish alternative to the commonly known 'Witches Nose' handle. This handle comes in two back-plate options, the first being a flat plate for either new doors or retrofit applications, while the second is mounted on a recessed dish, providing more available space behind the handle but requiring more detailed door preparation prior to installation. Although not DHF TS001 compliant, it's suitable for applications where there is less challenging behaviour or installed with back-to-back bolt-through fixings. Its dimensions are 205mm x 90mm x 3mm, and it's tested to Level B4 TS001 Grade for anti-ligature purposes.This product has multiple variants. The options may be chosen on the product page -
Disposable Heel Cup
An effective patient positioner that minimises the risk of cross contamination and avoids the expense and time of cleaning, the Hipac single use heel cup is non-sterile and perfect for high traffic environments. Made in Australia, they should be used with a standard reusable table or positioning pads and are offered in cartons of 24 pairs of single use heel cups. As with all our disposable products, we can provide custom solutions to suit any need, please talk to us for further information. -
Thigh Support Pad and Strap
This product has multiple variants. The options may be chosen on the product page- Replacement pad and strap to suit Thigh Support.
-
Gel Concave Armboard Pad
This product has multiple variants. The options may be chosen on the product page- Contoured for multi direction support.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Disposable Wedges
A single use, non-sterile wedge manufactured in Australia. With a range of sizes, these wedges minimise the risk of cross contamination and with no cleaning needed, are perfect for busy theatres. Offered in a pack of 12 wedges, they must be used in conjunction with a standard reusable table or positioning pads, and are ideal for fast, secure positioning.This product has multiple variants. The options may be chosen on the product page -
CLIK Load Release Corner Shelf
The CLIK Load Release Corner Shelf is designed to release when an abnormal load is applied, like an attempted ligature, causing the shelf to drop away and preventing a successful ligature. The shelf can easily be reattached by pushing it back into the corresponding brackets. The brackets feature heat-treated stainless steel spring clips, allowing the product to release and reattach repeatedly without compromising performance or safety. The shelf is made of 8mm polycarbonate with chamfered edges and rounded corners, making it sturdy and safe for use. -
Gel Fracture Table Foot Pad
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
CLIK Load Release Toilet Roll Holder
The CLIK Load Release Toilet Roll Holder is a practical and safe solution for facilities with potential ligature risks. Its unique design offers the convenience of a traditional toilet roll holder while also ensuring safety. It features a bracket made of heat-treated stainless steel and a spring clip that can repeatedly release and reattach without compromising performance. This product prevents abnormal loads, such as attempted ligatures, from causing harm by allowing the holder to drop away and be easily reattached after the event. -
Flush Pull Handle, Round
The Flush Pull Handle in a 40mm round shape, is designed to be recessed for a sleek finish. Made of high-quality satin stainless steel with concealed screws, this handle is both durable and visually appealing. Choose from various shapes including the square and rectangle to fit the specific requirements of your facility. -
27″ 4K UHD Medical Display
Featuring clear and precise viewing of endoscopic, fluoroscopic, ultrasound, and other live surgical video content. With rapid signal detection of video sources found in the operating room and extensive built-in timing tables, these monitors are fully compatible with various medical equipment. Our monitors offer flexible screen layouts, including picture-by-picture using separate video signals, and are both reliable and economical. With all the essential features needed in today's operating room, this is the ideal choice for any medical facility. -
Prone Anaesthetic Pillow
- Designed to provide support for prone positioning, allowing for safe positioning of intubated patients.
- Twin layered foam with soft vinyl cover.
-
Gel Sandbags
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution
-
Jaw Elevation Device (JED)
- Maintains an open airway in sedated or anesthetised patients without the need for airway instrumentation.
- Frees medical personnel from the need to hold the jaw manually in sedated or obtunded patients.
- When left in place after a procedure, reduces post-operative airway complications.
- Non-invasive and easy to apply.
- Provides reusable head support, eliminating the need for blankets, towels or donuts.
-
CLIK Load Release Coat Hook
The CLIK load release coat hook is a convenient and safe solution for Mental Health facilities. It functions as a regular coat hook, but when an abnormal load, like an attempted ligature, is detected, the hook releases and drops away, preventing any harm. The hook can be easily reattached after the event. The bracket includes a heat-treated stainless-steel clip, ensuring its durability and performance. -
Disposable Operating Table Cover
A single-use, non-sterile operating table cover that is designed to fit most makes and models of operating theatre tables. It offers comprehensive protection from surgical fluids for the table and offers more efficient, hygienic clean-up after use. It fits under positioning and other surgical accessories so that it doesn’t hinder the functionality of the table, or any other surgical equipment being used. Manufactured in Australia, they are offered in a carton of 30 single-use operating table covers. -
Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -
Curved Lateral Support Pad
- Replacement pad made to suit Curved Lateral Support, Curved Support and Curved Support Non-Rotating.
- Vinyl-covered foam.
-
Disposable Stacked Head Ring
Designed for use with standard reusable tables or positioning pads, the Hipac single use, non-sterile stacked head rings are manufactured in Australia from high quality foam materials. As single use items, they minimise the risk of cross contamination and avoid the time and expense of cleaning for rapid turnaround of equipment. Supplied in a carton of 12 single use attacked head rings, they are ideal for any medical facility. -
Kestrel Load Release Mounting Plate
Kestrel Load Release Mounting Plate offers a simple and effective way to convert various items to anti-ligature status. These plates are available in three sizes and can be held vertically against the wall using the Kestrel brackets hidden behind them. The plates feature a sleek design that blends seamlessly into any environment. They are suitable for mounting products like soap dispensers, paper towel dispensers, and toilet roll holders, however, it is crucial to assess the potential risks associated with the product to ensure the safety of patients and staff.This product has multiple variants. The options may be chosen on the product page -
Pinch Grip Anti-Ligature Handles
The Primera '729' Pinch Grip anti-ligature handle is a well-known design icon in the mental healthcare industry. Its stylish and sleek lines are popular among interior designers who aim to create welcoming environments. This design has been a staple in the Primera range since its beginning and is suitable for applications where manual dexterity is not a major consideration, such as elderly or infirm patients. The '729' has been purpose-designed and DHF TS001 tested, achieving the highest level (Grade 4) like all Primera products. The back plates are made from 3mm electro-plated steel, available in either radius or square format, with pin torx anti-tamper fixings included. Bolt-through fixings are also available for an additional fee.This product has multiple variants. The options may be chosen on the product page -
Gel Donut Head Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Emergency Pull Handle
The Emergency Pull Handle is a vital accessory in any healthcare facility with anti-barricade doors. It provides additional grip to overcome any internal force generated by a patient holding the handle from the inside of the door, preventing clinical staff access. By sliding the Emergency Pull Handle over the pinch grip handle, the door can be opened outwardly by pulling it. The length of the handle is designed to allow multiple staff members to participate in pulling the door, ensuring swift entry to the barricaded room. The Emergency Pull Handle is compatible only with 729 handles. -
Form-A-Screen
- Flexible anaesthetic screen, shapes into any configuration.
- Requires two size 16 clamps for mounting.
-
Narrow Rotatable Lateral Support Pad
- Replacement pad made to suit Narrow Rotatable Lateral Support.
- Vinyl-covered foam pad.
- Latex-free.
-
Gel Prone Headrest with Interchangeable Base
- Including three different heights to provide more customised positioning.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Disposable Face Rest Covers to suit Epidural Positioning Device
Our Sani-Cover Medical Grade Disposable Face Rest Covers are designed for use with our Epidural Positioning Device (EPD) or for any crescent-shaped face rest cushion. The 25 gsm, spunbound fabric provides a comfortable, sanitary barrier for the face during care and treatment. Latex-free elastic ensures the cover remains in place but allows for quick and easy changeover between patients. The Face Rest Covers also fit the Epidural Positioning Device (EPD) arm rest. Sold in packs of 50. -
Carter Braine Arm Support Pad
This product has multiple variants. The options may be chosen on the product page- Replacement Pad to suit Carter Braine Arm Support.
