May, 2023
Cart
You may be interested in…
-
Lift Assisted Leg Holders / Stirrups
- 270kg patient weight capacity.
- Gas lift assisted stirrups.
- 120 degrees boot rotation.
- Handle controlled abduction and adduction.
- Pad set included. Replacement pads can be found here: Stirrup Replacement Pads.
- Requires two size 33 clamps for mounting. We recommend using the Stirrup Clamp.
-
Foam Laminectomy Rest
<ul><li>Vinyl covered foam positioning device.</li><li>Contoured support, shaped to assist in prone patient positioning.</li><li>All seams chemically sealed.</li></ul> -
Gillespie Pillow
- Vinyl-covered foam positioning device.
- Contoured support, shaped to assist in prone patient positioning.
- All seams are chemically sealed.
-
Contour Anti-Ligature Grab Rail, 700mm
The Contour Anti-Ligature Grab Rail measuring 700mm is the perfect solution for those seeking safety and hygiene. It's designed to be free of ligature points, whether installed vertically or horizontally. The sloping cap on one end ensures that nothing can be looped around the rail completely without slipping off. Additionally, its open end enables straightforward drainage, reducing the risk of infection and sanitation concerns that can arise from typical infilled rails.This product has multiple variants. The options may be chosen on the product page -
Leg Holder with Seamless Foam Pad
This product has multiple variants. The options may be chosen on the product page- Pair of leg holders with ball joint adjustment.
- Pads included.
- Requires two clamps for mounting.
-
Two Piece Laminectomy Rest
- Vinyl covered positioning device.
- Contoured support, shaped to assist in prone patient positioning.
- Vinyl covered foam.
- All seams chemically sealed.
-
CLIK Load Release Semi Circular Shelf
The Clik Load Release Semi-Circular Shelf is a convenient solution that is designed to prevent ligature risks. When abnormal loads are applied, such as attempted ligatures, the brackets are specifically designed to release the shelf to drop away, preventing a successful ligature. Once the event has passed, the shelf can be reattached by simply pushing it back into the corresponding brackets. The brackets feature heat-treated stainless steel spring clips that allow the product to release and reattach repeatedly without any decline in safety or performance. Made from 8mm polycarbonate with chamfered edges and rounded corners, this shelf is a reliable and safe addition to any mental health facility. -
Recessed Anti-Ligature Pull Handle
The Recessed Anti-Ligature Pull Handle is a compact option from the Primera pull handle range, measuring only 90mm x 106mm and constructed from 3mm solid steel. The '726' handle is suitable for a variety of applications, from cupboards to doors in units with challenging behaviour, due to its lack of protrusions. It meets the requirements of TS001 at level 4 and is available in Satin Stainless Steel electro-plated finish as a standard product, with other finishes available upon request. The handle is also supplied with pin torx anti-tamper fixing screws for added security. -
Orthopaedic Sacral Rest Pad
- Replacement Pad to suit Orthopaedic Sacral Rest.
- Standard Series foam mattress.
-
Kestrel Load Release Polycarbonate Towel Rail Set
The Kestrel Load Release Polycarbonate Towel Rail Set offers a unique safety feature that sets it apart from traditional towel rails. With magnetic brackets, it can release and drop away in the event of an attempted ligature, preventing harm. The clear polycarbonate tube also minimizes the risk of it being used as a weapon or to hide contraband. -
Pinch Grip Anti-Ligature Handles
The Primera '729' Pinch Grip anti-ligature handle is a well-known design icon in the mental healthcare industry. Its stylish and sleek lines are popular among interior designers who aim to create welcoming environments. This design has been a staple in the Primera range since its beginning and is suitable for applications where manual dexterity is not a major consideration, such as elderly or infirm patients. The '729' has been purpose-designed and DHF TS001 tested, achieving the highest level (Grade 4) like all Primera products. The back plates are made from 3mm electro-plated steel, available in either radius or square format, with pin torx anti-tamper fixings included. Bolt-through fixings are also available for an additional fee.This product has multiple variants. The options may be chosen on the product page -
Trapezoid Positioner
- Vinyl covered foam.
- All seams chemically sealed.
-
CLIK Load Release Coat Hook
The CLIK load release coat hook is a convenient and safe solution for Mental Health facilities. It functions as a regular coat hook, but when an abnormal load, like an attempted ligature, is detected, the hook releases and drops away, preventing any harm. The hook can be easily reattached after the event. The bracket includes a heat-treated stainless-steel clip, ensuring its durability and performance. -
Replacement Pad with Gel Insert to suit Wilson Frame
- Layered foam base structure with an integrated gel layer.
- Fully enclosed with a combination of Standard and Comfort Series vinyl.
- All seams are chemically sealed.
- Sold in pairs.
-
Shoulder Rest Pads
- Pad set to suit early model Hipac Shoulder Rests, Pair.
- Vinyl-covered foam pad.
- Latex-Free.
-
Vacuform Bean Bags
The secret of perfected adaption to the body by VACUFORM surgical mattresses is microballs of styrofoam, which are stabilised by vacuum to give a lasting, completely supportive form. Reducing the diameter of the filter balls by a fifth enables more precise adaption of the surgical mattress to the body. The MicroSpace system significantly increases the feeling of physical comfort for the patient compared to conventional fillings.This product has multiple variants. The options may be chosen on the product page -
Gel Pad to suit Wilson Frame
- Sold individually.
- Latex & Silicone Free.
- Anti-Bacterial & Anti-Microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aids in Pressure Redistribution.
-
Unaffected Leg Holder Pad
- Replacement Pad to suit Unaffected Leg Holder
-
Emergency Pull Handle
The Emergency Pull Handle is a vital accessory in any healthcare facility with anti-barricade doors. It provides additional grip to overcome any internal force generated by a patient holding the handle from the inside of the door, preventing clinical staff access. By sliding the Emergency Pull Handle over the pinch grip handle, the door can be opened outwardly by pulling it. The length of the handle is designed to allow multiple staff members to participate in pulling the door, ensuring swift entry to the barricaded room. The Emergency Pull Handle is compatible only with 729 handles. -
Adjustable Mayfield Adaptor
- Adaptor to attach Mayfield head frame to operating table.
- Slides over side rails.
- Locks securely in place with wrist screws.
-
Elephants Trunk Pull Handle
The Elephants Trunk Pull Handle is a robust and solid cast product designed for applications where manual dexterity is a primary concern. Its sleek design provides a stylish alternative to the commonly known 'Witches Nose' handle. This handle comes in two back-plate options, the first being a flat plate for either new doors or retrofit applications, while the second is mounted on a recessed dish, providing more available space behind the handle but requiring more detailed door preparation prior to installation. Although not DHF TS001 compliant, it's suitable for applications where there is less challenging behaviour or installed with back-to-back bolt-through fixings. Its dimensions are 205mm x 90mm x 3mm, and it's tested to Level B4 TS001 Grade for anti-ligature purposes.This product has multiple variants. The options may be chosen on the product page -
Orthopaedic Hip Rest
• Designed to suit Amsco/Steris and 777 orthopaedic traction frames. • Radiolucent carbon fibre construction. • Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Hip Rest -
Adjustable Shoulder Rest Pads
- Replacement Pads to suit Adjustable Shoulder Rest.
- Vinyl-covered foam pad, single.
- Latex-free.
-
Single Leg Prepper
- Stainless steel construction.
- Requires one size 16 clamp for mounting.
- Requires pad, sold separately. Replacement pads can be found here: Leg Prepper Pads.
-
Hip Abduction Pillow
This product has multiple variants. The options may be chosen on the product page- Foam positioner designed for hip abduction positioning.
- Includes hook and loop straps, designed to wrap around the patient's legs and secure to the back of the pad.
-
Kestrel Load Release Mounting Plate
Kestrel Load Release Mounting Plate offers a simple and effective way to convert various items to anti-ligature status. These plates are available in three sizes and can be held vertically against the wall using the Kestrel brackets hidden behind them. The plates feature a sleek design that blends seamlessly into any environment. They are suitable for mounting products like soap dispensers, paper towel dispensers, and toilet roll holders, however, it is crucial to assess the potential risks associated with the product to ensure the safety of patients and staff.This product has multiple variants. The options may be chosen on the product page -
Anti-Ligature Window Push/Pull Handle with Roller Latching Deadlock
The Anti-Ligature Window Push/Pull Handle with Roller Latching Deadlock is a secure and flexible option for top and side-hung sash windows. Its robust and narrow backset mortise deadbolt with roller bolt latching system provides a high level of security. Patients can latch the window closed, but the locking function is restricted to the staff key only for added safety. The lock uses a standard euro cylinder, allowing for master keying. Tested to Level A4 TS001 Grade. -
CLIK Load Release Toilet Roll Holder
The CLIK Load Release Toilet Roll Holder is a practical and safe solution for facilities with potential ligature risks. Its unique design offers the convenience of a traditional toilet roll holder while also ensuring safety. It features a bracket made of heat-treated stainless steel and a spring clip that can repeatedly release and reattach without compromising performance. This product prevents abnormal loads, such as attempted ligatures, from causing harm by allowing the holder to drop away and be easily reattached after the event. -
CLIK Load Release Corner Shelf
The CLIK Load Release Corner Shelf is designed to release when an abnormal load is applied, like an attempted ligature, causing the shelf to drop away and preventing a successful ligature. The shelf can easily be reattached by pushing it back into the corresponding brackets. The brackets feature heat-treated stainless steel spring clips, allowing the product to release and reattach repeatedly without compromising performance or safety. The shelf is made of 8mm polycarbonate with chamfered edges and rounded corners, making it sturdy and safe for use.
