May, 2023
Cart
You may be interested in…
-
Foam Laminectomy Rest
<ul><li>Vinyl covered foam positioning device.</li><li>Contoured support, shaped to assist in prone patient positioning.</li><li>All seams chemically sealed.</li></ul> -
Tube Holder
- Impact resistant polycarbonate.
- Slotted to accept tubing.
- Slips under table mattress and is supported by patient's weight.
-
Lithotomy Leg Holders
- Stainless steel construction.
- Requires two size 16 clamps for mounting.
- Requires pads and straps, sold separately.
- Replacement pads and straps can be found here: Lithotomy Leg Holder Pads.
- Disposable Lithotomy Straps are recommended for the safe positioning of the patient.
- Sold in pairs.
-
List Cart
<ul><li>Australian Made 304 Grade Stainless Steel Trolley with hinged doors, concealed push handle, bumper surround andadjustable shelves.</li><li>Top Shelf: 50kg weight capacity</li><li>Castors: 4x 125mm Non-Locking Castors</li></ul>Measurements: 1200mm(L) x 600mm(W) x 1430mm(H) -
Kestrel Toilet Roll Holder, White Plastic
The Kestrel Toilet Roll Holder in white plastic is a reliable and safe solution for facilities concerned about ligature risks. It functions as a traditional toilet roll holder but has a magnetic bracket that allows the holder to release and drop away in the event of an abnormal load, such as an attempted ligature. The holder can be easily reattached to the magnetic bracket after the incident. -
Linen Trolley
Australian Made 304 Grade Stainless Steel Trolley. Measurements: 950mm(L) x 800mm(W) x 1200mm(H). Bottom Shelf: 50kg weight capacity. Castors: 4x 125mm Non-Locking Castors. -
Removable Door Stop, Aluminium
The Aluminium Removable Door Stop provides an effective solution to prevent barricade attempts in combination with a double swing hinge. While the door is in normal use, the stop stays locked to the door frame and acts as a traditional stop to prevent the door from swinging outward. In the case of a barricade, the stop can be unlatched from the frame using a key and opened outward to enable the door to swing away from the obstruction. Available in right or left-handed configuration, the door stop comes in 2100mm and 2400mm lengths and requires a 4mm key. This door stop is rigorously tested to Level B4 TS001 Grade.This product has multiple variants. The options may be chosen on the product page -
Donut Head Ring
This product has multiple variants. The options may be chosen on the product page- Seamless vinyl coated foam head ring.
-
Replacement Pad with Gel Insert to suit Wilson Frame
- Layered foam base structure with an integrated gel layer.
- Fully enclosed with a combination of Standard and Comfort Series vinyl.
- All seams are chemically sealed.
- Sold in pairs.
-
Triple Linen Skip, No Lid
Hipac Linen Skips are designed for the collection and handling of soiled or used linen. They are fully mobile, with 75mm swivel castors, and feature a robust, lightweight construction frame to suit a standard dry used linen bag. Feel free to reach out to us and explore the options we offer for customising and creating unique products to meet your specific requirements. Measurements: Dimensions: 1170mm(L) x 540mm(W) x 850mm(H) Safe Working Load: 120kg Product Weight: 15.69kg. -
Pelvic Tilt Seat Pad
This product has multiple variants. The options may be chosen on the product page- Replacement Pad to suit Pelvic Tilt Seat.
- Comfort Series.
-
Single Linen Skip No Lid
Hipac linen skips are designed for the collection and handling of soiled or used linen. They are fully mobile, with 75mm swivel castors, and feature a robust, lightweight construction frame to suit a standard dry used linen bag. Feel free to reach out to us and explore the options we offer for customising and creating unique products to meet your specific requirements. Measurements: Dimensions: 380mm(L) x 540mm(W) x 850mm(H). -
Unaffected Leg Holder
- To suit Amsco/Steris and 777 Orthopaedic Traction Frames.
- Requires pad, pad sold separately. Replacement pads can be found here: Unaffected Leg Holder Pad.
-
Resuscitation Trolley – Classic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 2x 125mm(D) Half Drawers Shelves: 50kg weight capacity per shelf Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Two Piece Laminectomy Rest
- Vinyl covered positioning device.
- Contoured support, shaped to assist in prone patient positioning.
- Vinyl covered foam.
- All seams chemically sealed.
-
Double Linen Skip, No Lid
Hipac linen skips are designed for the collection and handling of soiled or used linen. They are fully mobile, with 75mm swivel castors, and feature a robust, lightweight construction frame to suit a standard dry used linen bag. Feel free to reach out to us and explore the options we offer for customising and creating unique products to meet your specific requirements. Measurements: Dimensions: 780mm(L) x 540mm(W) x 850mm(H) Safe Working Load: 80kg Product Weight: 10.46kg -
PR-1-96 Communal Lockset
The '96' is a manual locking product with a key/key format and anti-ligature Pull Handles on both sides of the door. An adjustable roller catch holds the door closed when unlocked, eliminating the need for lever handles. Originally designed for communal rooms, it's also ideal for link doors or offices that require a manual locking regime. The '96' is now widely used in CAMHS units and other challenging environments due to its ability to lock the door in both open and closed positions. It comes in six design options and various electro-plated and powder-coated finishes. This lockset is tested to Level A4 TS001 Grade.This product has multiple variants. The options may be chosen on the product page -
Disposable Patient Care Kit to suit Wilson Frame
A complete, single-use patient care kit designed for use with the Wilson Table. Manufactured in Australia, they minimise the risk of cross-contamination and avoid extensive cleaning. The kit includes a full positioning kit, including:This product has multiple variants. The options may be chosen on the product page- Arm Cradles
- Anaesthetic Head Pillow
- Pad Sleeves
- Transverse Bar Pad
- Base Cover Drape
-
Mobile Arm Table
Australian Made Mobile Arm Table with Radiolucent Top. Pad sold separately: Mobile Arm Table Pad Table Measurements: 490(W) x 750(L)mm. Adjustable Height: 470 - 1140mm. Castors: 4x 75mm locking castors. -
Heavy Duty Lift Assisted Leg Holders / Stirrups
- 360kg patient weight capacity.
- Gas lift assisted stirrups.
- 120 degree boot rotation.
- Handle controlled abduction and adduction.
- Pad set included. Replacement pads can be found here: Stirrup Replacement Pads.
- Requires two size 33 clamps for mounting. We recommend using the Stirrup Clamp.
-
Gel Lithotomy Legholder Stirrup Pad
This product has multiple variants. The options may be chosen on the product page- For use with Lithotomy Leg Holders.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Multi Drawer Trolley
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 900mm(L) x 490mm(W) x 900mm(H). Drawer Measurements: 4x 100mm(D), 2x 150mm(D). Shelf: 50kg weight capacity. Castors: 2x 125mm Non-Locking Castors on back. 2x 125mm Locking Castors on front. -
Anaesthetic Pillow
- Vinyl covered with chemically sealed seams.
-
Recessed Anti-Ligature Pull Handle
The Recessed Anti-Ligature Pull Handle is a compact option from the Primera pull handle range, measuring only 90mm x 106mm and constructed from 3mm solid steel. The '726' handle is suitable for a variety of applications, from cupboards to doors in units with challenging behaviour, due to its lack of protrusions. It meets the requirements of TS001 at level 4 and is available in Satin Stainless Steel electro-plated finish as a standard product, with other finishes available upon request. The handle is also supplied with pin torx anti-tamper fixing screws for added security. -
Bulk Collection Trolley
Australian Made 304 Grade Stainless Steel Trolley. Measurements: 900mm(L) x 600mm(W) x 950mm(H). Bottom Shelf: 50kg weight capacity. Castors: 4x 125mm Non-Locking Castors. -
Triple Linen Skip With Foot-Operated Lid
Hipac linen skips are designed for the collection and handling of soiled or used linen. They are fully mobile, with 75mm swivel castors, and feature a robust, lightweight construction frame to suit a standard dry used linen bag. Includes lightweight plastic foot-operated lids. Feel free to reach out to us and explore the options we offer for customising and creating unique products to meet your specific requirements. Measurements: Dimensions: 1170mm(L) x 540mm(W) x 850mm(H) Safe Working Load: 120kg Product Weight: 19.35kg -
Hipac Anti-Ligature Roller Blind System
Hipac's Anti-Ligature Roller Blind System offers a safe and durable solution for facilities in need of ligature-free options. With the slow-rise mechanism, the blinds open smoothly, while the magnetic suspension brackets eliminate any potential ligature points. The system can be easily refitted after any abnormal load is detected, ensuring continued safety and security. -
Instrument Tray
- Stainless steel construction.
- Requires clamp, size 16.
- Ball joint for easy positioning.
- Removable tray.
-
Kestrel Soap Dish – White Plastic
The Kestrel Soap Dish in white plastic is a practical and secure choice for environments where there is a risk of self-harm. Its magnetic wall-mounted bracket is designed to release the soap dish in the event of an abnormal load, allowing it to drop away. Once the incident has passed, the dish can be quickly and easily reattached to the bracket. This product provides a straightforward and efficient solution to minimize the risk of harm in any setting. -
Patient Slides
This product has multiple variants. The options may be chosen on the product page- Designed to reduce effort required when moving patients between beds and trolleys.
- Reduces risk of staff back injuries.
-
Gel Paediatric Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't leak if punctured.
- Won't bottom out.
- Reduces friction & shear.
- Aides in pressure redistribution.
-
Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -
Single Swing Full Length Anti-Ligature Geared Securahinge
The Single Swing Full Length Anti-Ligature Geared Securahinge is a continuous hinge that is designed to reduce the risk of ligature and self-harm. It features a sloping cap and specially designed bearings, which removes the gap between the door leaf and frame that can be found in butt or piano-style hinges. It opens up to 180 degrees in one direction, making it suitable for applications where the door needs to fold back against the wall. The Securahinge can be installed with either the Floor Mounted Door Closer or the Concealed Door Closer. It can also be cut down to fit the length of the door. This hinge is tested to Level B4 TS001 Grade.This product has multiple variants. The options may be chosen on the product page -
Table Width Extension Pads
This product has multiple variants. The options may be chosen on the product page- Replacement Pads to suit Direct-On Table Width Extension.
- Pads sold individually.
-
Universal Stirrup Trolley
- Stainless Steel construction with a polymer base.
- Accepts most brands of lift assisted leg holders.
- Holds one pair of leg holders.
-
Gel Epidural Positioning Device Arm Rest Pad
- Latex & Silicone Free.
- Anti-Bacterial & Anti-Microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aids in Pressure Redistribution.
-
Vacuform Non Slip Foil
The secret of perfected adaption to the body by VACUFORM surgical mattresses is microballs of styrofoam, which are stabilised by vacuum to give a lasting, completely supportive form. Reducing the diameter of the filter balls by a fifth enables more precise adaption of the surgical mattress to the body. The MicroSpace system significantly increases the feeling of physical comfort for the patient compared to conventional fillings. Particularly during time-consuming operations or with patients who are older and in poor condition, there is a risk of pressure points leading to acute decubital ulcers and paresis (paralysis from nerve damage). The individual, ergonomic body adaptation of VACUFORM surgical mattresses effectively prevents such damage. The support pressure of the patient is optimally distributed over the whole body and thus reduced to a minimum. The microcirculation needed by the skin is unaffected. The patient has a noticeable feeling of comfort, lightness and warmth.This product has multiple variants. The options may be chosen on the product page- Prevents Vacuform mattress slipping in extreme angles.
- Easy to clean and reusable.
- Available as a roll, or a single piece.
- To be used underneath the Vacuform Bean Bags.
-
Epidural Positioning Device (EPD)
The Epidural Positioning Device commonly known as the EPD, is a revolutionary device for positioning patients safely and securely during epidural procedures. -
Gillespie Pillow
- Vinyl-covered foam positioning device.
- Contoured support, shaped to assist in prone patient positioning.
- All seams are chemically sealed.
-
Disposable Operating Table Cover
A single-use, non-sterile operating table cover that is designed to fit most makes and models of operating theatre tables. It offers comprehensive protection from surgical fluids for the table and offers more efficient, hygienic clean-up after use. It fits under positioning and other surgical accessories so that it doesn’t hinder the functionality of the table, or any other surgical equipment being used. Manufactured in Australia, they are offered in a carton of 30 single-use operating table covers. -
Resuscitation Trolley – Deluxe
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 6x 125mm(D) Half Drawers, 1x 250mm(D) Full Width Drawer Shelf: 50kg weight capacity Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Popliteal Support
This product has multiple variants. The options may be chosen on the product page<ul><li>Standard supports are stainless steel. Radiolucent options are available.</li><li>Requires one clamp for mounting.</li><li>Requires pad, pad sold separately. Replacement pads can be found here: Popliteal Support Pad.</li></ul> -
Mayo Table – Two Leg Flat Base
Australian Made 304 Grade Stainless Steel Mayo Table with Two Leg Flat Base. Adjustable Height: 820 - 1120mm Tray Size: 560(L) x 410mm(W) Castors: 2x 50mm Non-Locking Castors -
Kestrel Polycarbonate Wardrobe Rail
The Kestrel Polycarbonate Wardrobe Rail offers the expected convenience of a traditional wardrobe rail with added safety features. If an abnormal load is applied, such as an attempted ligature, the magnetic brackets will release, preventing a successful ligature. After the event, the rail can be easily reattached to the magnetic brackets. This rail is made of a lightweight clear polycarbonate tube, which reduces the risk of it being used as a weapon or hiding contraband.This product has multiple variants. The options may be chosen on the product page -
Stirrup Clamps
Operating theatre tables are fitted with side rails to which positioning equipment is attached. These rails range in size according to their make and origin. In order to achieve stable positioning, the correct sized clamp must be used.This product has multiple variants. The options may be chosen on the product page- Suits most brands of gas assisted stirrups.
- Accepts size 33 regtangular post.
- Aluminium construction.
- Clamps to suit A Size Rails are direct-on where slots are fitted in side rail.
- Clamps to suit stirrups include, but are not limited to, sirrups with the following boot colours; red, yellow, pink, blue, grey, black, white and purple.
-
Gel Donut Head Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Femoral / Popliteal Board Pad
- Replacement Pad to suit Femoral/Popliteal Board for Steris 3080/3085 Operating Theatre Tables.
-
Select Series Anaesthetic Cart
Our select series anaesthetic cart features dual pull-out side shelves, twin poly handles, four premium 125mm castors (including locking, swivel, and directional castors), and a key lock for secure storage. It also includes a durable sealed work surface, full extension ball bearing drawer slides, and an outrigger stabilising frame with bump guards. Please note that accessories are not included but can be purchased separately. Package Inclusions:This product has multiple variants. The options may be chosen on the product page- Select Series Trellis
- Select Series Tilt Bins Five Units
- Select Series Tilts Bins Four Units
- Select Series Tubular Wrap Around Railing
- Glove Box Holder
- Tape Dispenser with Brackets
- Small Drawer Divider Pack (two 76mm(D) trays, four long dividers, eight short dividers)
- Large Drawer Divider Pack (two 127mm(D) trays, two long dividers)
- Waste Container w/Lift Top
- Wire Basket 305(L) x 305(W) x 203mm(D)
- 76mm(D) Tray with 8 Flex Dividers and 14 Ampule Holders
-
PR-1-66 Latch-Lock (Key/Turn) Lockset
The Primera '66' lock is designed for automatic locking applications and includes the Primary Barricade Override feature. It's ideal for areas where doors need to be locked automatically, such as kitchens, dispensaries, and cupboards storing cleaning chemicals. Automatic locking reduces wear and tear on keys, extending the life expectancy of the cylinder. The lock also features an antithrust bolt that deadlocks the latch, making it highly resistant to manipulation. The 'Passage Set' function allows the key to withhold the latch to prevent automatic locking. Refer to our brochure for handle options. This lockset is tested to Level A4 TS001 Grade.This product has multiple variants. The options may be chosen on the product page -
Mayfield Adaptor
- Adaptor to attach Mayfield Head Frame to 3500, 3600, 6700 and 5801 Series Operating Tables.
- Slides into head or leg receptacles.
- Can be manufactured to suit most makes/models of operating tables. Contact us with your specific requirements.
