May, 2023
Cart
You may be interested in…
-
Disposable Patient Care Kit to suit Jackson Table
A complete, single use patient care kit designed for use with the Jackson Table. Manufactured in Australia, they minimise the risk of cross contamination and avoid extensive cleaning.This product has multiple variants. The options may be chosen on the product page -
-
Curved Lateral Support
This product has multiple variants. The options may be chosen on the product page- Adjusts vertically and horizontally.
- Requires one clamp for mounting.
- Requires pad. Pad sold separately. Replacement Pads can be found here: Curved Lateral Support Pad.
-
Vacuform Non Slip Foil
The secret of perfected adaption to the body by VACUFORM surgical mattresses is microballs of styrofoam, which are stabilised by vacuum to give a lasting, completely supportive form. Reducing the diameter of the filter balls by a fifth enables more precise adaption of the surgical mattress to the body. The MicroSpace system significantly increases the feeling of physical comfort for the patient compared to conventional fillings. Particularly during time-consuming operations or with patients who are older and in poor condition, there is a risk of pressure points leading to acute decubital ulcers and paresis (paralysis from nerve damage). The individual, ergonomic body adaptation of VACUFORM surgical mattresses effectively prevents such damage. The support pressure of the patient is optimally distributed over the whole body and thus reduced to a minimum. The microcirculation needed by the skin is unaffected. The patient has a noticeable feeling of comfort, lightness and warmth.This product has multiple variants. The options may be chosen on the product page- Prevents Vacuform mattress slipping in extreme angles.
- Easy to clean and reusable.
- Available as a roll, or a single piece.
- To be used underneath the Vacuform Bean Bags.
-
Anti-Ligature Window Push/Pull Handle with Roller Latching Deadlock
The Anti-Ligature Window Push/Pull Handle with Roller Latching Deadlock is a secure and flexible option for top and side-hung sash windows. Its robust and narrow backset mortise deadbolt with roller bolt latching system provides a high level of security. Patients can latch the window closed, but the locking function is restricted to the staff key only for added safety. The lock uses a standard euro cylinder, allowing for master keying. Tested to Level A4 TS001 Grade. -
Lateral Arm Support
- Adjusts vertically and horizontally, slides, tilts and rotates.
- Requires one size 16 clamp for mounting.
- Requires pad, pad sold separately. Replacement pads can be found here: Lateral Arm Support Pad.
-
Side Rail Kit
This product has multiple variants. The options may be chosen on the product page- Designed to suit Skytron 3600, 3500 and 6700 Series operating tables.
- Available for other table models. Contact us with your specific requirements.
-
Contour Anti-Ligature Grab Rail, 700mm
The Contour Anti-Ligature Grab Rail measuring 700mm is the perfect solution for those seeking safety and hygiene. It's designed to be free of ligature points, whether installed vertically or horizontally. The sloping cap on one end ensures that nothing can be looped around the rail completely without slipping off. Additionally, its open end enables straightforward drainage, reducing the risk of infection and sanitation concerns that can arise from typical infilled rails.This product has multiple variants. The options may be chosen on the product page -
Pinch Grip Anti-Ligature Handles
The Primera '729' Pinch Grip anti-ligature handle is a well-known design icon in the mental healthcare industry. Its stylish and sleek lines are popular among interior designers who aim to create welcoming environments. This design has been a staple in the Primera range since its beginning and is suitable for applications where manual dexterity is not a major consideration, such as elderly or infirm patients. The '729' has been purpose-designed and DHF TS001 tested, achieving the highest level (Grade 4) like all Primera products. The back plates are made from 3mm electro-plated steel, available in either radius or square format, with pin torx anti-tamper fixings included. Bolt-through fixings are also available for an additional fee.This product has multiple variants. The options may be chosen on the product page -
Emergency Pull Handle
The Emergency Pull Handle is a vital accessory in any healthcare facility with anti-barricade doors. It provides additional grip to overcome any internal force generated by a patient holding the handle from the inside of the door, preventing clinical staff access. By sliding the Emergency Pull Handle over the pinch grip handle, the door can be opened outwardly by pulling it. The length of the handle is designed to allow multiple staff members to participate in pulling the door, ensuring swift entry to the barricaded room. The Emergency Pull Handle is compatible only with 729 handles. -
Right Angle Lateral Support Pad
- Replacement pad made to suit Right Angle Lateral Support.
- Vinyl-covered foam pad.
- Mounted via Hook and Loop attachment.
-
Debello Lateral Hip Positioner Pads
This product has multiple variants. The options may be chosen on the product page- Replacement pads to suit Debello Lateral Hip Positioner.
- Seamless vinyl-covered foam pad.
-
Elephants Trunk Pull Handle
The Elephants Trunk Pull Handle is a robust and solid cast product designed for applications where manual dexterity is a primary concern. Its sleek design provides a stylish alternative to the commonly known 'Witches Nose' handle. This handle comes in two back-plate options, the first being a flat plate for either new doors or retrofit applications, while the second is mounted on a recessed dish, providing more available space behind the handle but requiring more detailed door preparation prior to installation. Although not DHF TS001 compliant, it's suitable for applications where there is less challenging behaviour or installed with back-to-back bolt-through fixings. Its dimensions are 205mm x 90mm x 3mm, and it's tested to Level B4 TS001 Grade for anti-ligature purposes.This product has multiple variants. The options may be chosen on the product page -
Recessed Anti-Ligature Pull Handle
The Recessed Anti-Ligature Pull Handle is a compact option from the Primera pull handle range, measuring only 90mm x 106mm and constructed from 3mm solid steel. The '726' handle is suitable for a variety of applications, from cupboards to doors in units with challenging behaviour, due to its lack of protrusions. It meets the requirements of TS001 at level 4 and is available in Satin Stainless Steel electro-plated finish as a standard product, with other finishes available upon request. The handle is also supplied with pin torx anti-tamper fixing screws for added security. -
Disposable Patient Care Kit to suit Wilson Frame
A complete, single-use patient care kit designed for use with the Wilson Table. Manufactured in Australia, they minimise the risk of cross-contamination and avoid extensive cleaning. The kit includes a full positioning kit, including:This product has multiple variants. The options may be chosen on the product page- Arm Cradles
- Anaesthetic Head Pillow
- Pad Sleeves
- Transverse Bar Pad
- Base Cover Drape
-
Gel Supine Head Pad with Dish
This product has multiple variants. The options may be chosen on the product page- Self centering dish, conforms to the patient's head while offering support.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear
- Aides in Pressure Redistribution.
-
Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -
Universal Bar Clamps
Operating theatre tables are fitted with side rails to which positioning equipment is attached. These rails range in size according to their make and origin. In order to achieve stable positioning, the correct sized clamp must be used.This product has multiple variants. The options may be chosen on the product page- Accepts most brands of gas assisted stirrups.
- Accepts up to size 17 round post.
- Accepts size 33 and 34 rectangular bar.
- Lightweight aluminium construction.
- Clamps to suit A size rails are direct-on where slots are fitted in side rail.
-
Singer Starr Stacker Lateral Support System
The Singer Starr Stacker is a surgical table accessory designed for procedures that require a patient to lie in the lateral or semi-lateral position. In these positions, the arms and legs are placed one over the other. The Singer Starr System is an efficient and safe alternative to the current practices and is used to support a patient's arms and legs during these procedures. Use armboard set in conjunction with Wide Armboard *Two different heights of bottom cushions come with each Arm Stacker Pad Set.This product has multiple variants. The options may be chosen on the product page
