May, 2023
Cart
You may be interested in…
-
Anaesthetic Trolley – Classic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 600mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 1x 250mm(D), 3x 125mm(D) Shelf: 50kg weight capacity Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Anti-Ligature Window Push/Pull Handle with Roller Latching Deadlock
The Anti-Ligature Window Push/Pull Handle with Roller Latching Deadlock is a secure and flexible option for top and side-hung sash windows. Its robust and narrow backset mortise deadbolt with roller bolt latching system provides a high level of security. Patients can latch the window closed, but the locking function is restricted to the staff key only for added safety. The lock uses a standard euro cylinder, allowing for master keying. Tested to Level A4 TS001 Grade. -
Universal Bar Clamps
Operating theatre tables are fitted with side rails to which positioning equipment is attached. These rails range in size according to their make and origin. In order to achieve stable positioning, the correct sized clamp must be used.This product has multiple variants. The options may be chosen on the product page- Accepts most brands of gas assisted stirrups.
- Accepts up to size 17 round post.
- Accepts size 33 and 34 rectangular bar.
- Lightweight aluminium construction.
- Clamps to suit A size rails are direct-on where slots are fitted in side rail.
-
CLIK Load Release Towel Ring Holders
The CLIK Load Release Towel Ring Holders offer both style and durability in one product. This product can handle rough treatment while still maintaining its aesthetic appeal. Not only does it provide the expected convenience of a traditional towel ring, but it also has a unique safety feature. In the event of an attempted ligature, the bracket releases, and the towel ring drops away to prevent harm. It can be easily reinstated by pushing the towel ring holder back into the bracket. The bracket's heat-treated stainless-steel clip ensures repeated release and reattachment without compromising performance or safety. -
Curved Lateral Support Pad
- Replacement pad made to suit Curved Lateral Support, Curved Support and Curved Support Non-Rotating.
- Vinyl-covered foam.
-
CLIK Load Release Semi Circular Shelf
The Clik Load Release Semi-Circular Shelf is a convenient solution that is designed to prevent ligature risks. When abnormal loads are applied, such as attempted ligatures, the brackets are specifically designed to release the shelf to drop away, preventing a successful ligature. Once the event has passed, the shelf can be reattached by simply pushing it back into the corresponding brackets. The brackets feature heat-treated stainless steel spring clips that allow the product to release and reattach repeatedly without any decline in safety or performance. Made from 8mm polycarbonate with chamfered edges and rounded corners, this shelf is a reliable and safe addition to any mental health facility. -
Kestrel Coat Hook
The Kestrel coat hook offers the expected functionality of a traditional hook with added safety features. The magnetic bracket releases the hook if an abnormal load, such as an attempted ligature, is applied, removing any ligature points. The hook is made of pliable material, rendering it ineffective for self-harm or as a weapon. After the event, the hook can be reattached to the magnetic bracket for continued use. -
Heavy Duty Lift Assisted Leg Holders / Stirrups
- 360kg patient weight capacity.
- Gas lift assisted stirrups.
- 120 degree boot rotation.
- Handle controlled abduction and adduction.
- Pad set included. Replacement pads can be found here: Stirrup Replacement Pads.
- Requires two size 33 clamps for mounting. We recommend using the Stirrup Clamp.
-
Patient Restraint Strap
This product has multiple variants. The options may be chosen on the product page- Straps secure to side rail with or without hooks.
- Latex free.
- Optional Mounting Hooks are available, not included.
- 2 sizes available.
-
Surgical Table Arm Guard Pad
Replacement Pad in Vinyl to suit Surgical Table Arm Guard Hipac also offers a Gel Arm And Leg Toboggan Pad Measurements: 200 (H) x 400 (W) x 15mm (D) -
Prone Anaesthetic Pillow
- Designed to provide support for prone positioning, allowing for safe positioning of intubated patients.
- Twin layered foam with soft vinyl cover.
-
Anaesthetic Screen Support
- Stainless steel construction.
- Requires one size 16 clamps for mounting.
- Requires pad which is sold separately. Replacement pads can be found here: Anaesthetic Screen Support Pad.
-
Resuscitation Trolley – Deluxe
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 6x 125mm(D) Half Drawers, 1x 250mm(D) Full Width Drawer Shelf: 50kg weight capacity Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Emergency Pull Handle
The Emergency Pull Handle is a vital accessory in any healthcare facility with anti-barricade doors. It provides additional grip to overcome any internal force generated by a patient holding the handle from the inside of the door, preventing clinical staff access. By sliding the Emergency Pull Handle over the pinch grip handle, the door can be opened outwardly by pulling it. The length of the handle is designed to allow multiple staff members to participate in pulling the door, ensuring swift entry to the barricaded room. The Emergency Pull Handle is compatible only with 729 handles. -
Jaw Elevation Device (JED)
- Maintains an open airway in sedated or anesthetised patients without the need for airway instrumentation.
- Frees medical personnel from the need to hold the jaw manually in sedated or obtunded patients.
- When left in place after a procedure, reduces post-operative airway complications.
- Non-invasive and easy to apply.
- Provides reusable head support, eliminating the need for blankets, towels or donuts.
-
Elephants Trunk Pull Handle
The Elephants Trunk Pull Handle is a robust and solid cast product designed for applications where manual dexterity is a primary concern. Its sleek design provides a stylish alternative to the commonly known 'Witches Nose' handle. This handle comes in two back-plate options, the first being a flat plate for either new doors or retrofit applications, while the second is mounted on a recessed dish, providing more available space behind the handle but requiring more detailed door preparation prior to installation. Although not DHF TS001 compliant, it's suitable for applications where there is less challenging behaviour or installed with back-to-back bolt-through fixings. Its dimensions are 205mm x 90mm x 3mm, and it's tested to Level B4 TS001 Grade for anti-ligature purposes.This product has multiple variants. The options may be chosen on the product page -
CLIK Load Release Conventional Towel Rail
The Clik load release conventional towel rail offers the functionality of a regular towel rail with an added safety feature. In case of an attempted ligature, the rail brackets are designed to release and the rail drops away, preventing any harm. The rail can be easily refitted to the brackets by pushing the rail holders back into place. The brackets have heat-treated stainless-steel spring clips, ensuring consistent safety and performance, even after multiple releases and reattachments. -
Resuscitation Trolley – Basic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 2x 125mm(D) Half Drawers Shelves: 50kg weight capacity per shelf Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Recessed Anti-Ligature Pull Handle
The Recessed Anti-Ligature Pull Handle is a compact option from the Primera pull handle range, measuring only 90mm x 106mm and constructed from 3mm solid steel. The '726' handle is suitable for a variety of applications, from cupboards to doors in units with challenging behaviour, due to its lack of protrusions. It meets the requirements of TS001 at level 4 and is available in Satin Stainless Steel electro-plated finish as a standard product, with other finishes available upon request. The handle is also supplied with pin torx anti-tamper fixing screws for added security. -
List Cart
<ul><li>Australian Made 304 Grade Stainless Steel Trolley with hinged doors, concealed push handle, bumper surround andadjustable shelves.</li><li>Top Shelf: 50kg weight capacity</li><li>Castors: 4x 125mm Non-Locking Castors</li></ul>Measurements: 1200mm(L) x 600mm(W) x 1430mm(H) -
Rotatable Shoulder Rest Pads
This product has multiple variants. The options may be chosen on the product page- Replacement pads to suit Rotatable Shoulder Rest.
- Seamless vinyl-covered foam pad.
- Two pad types available - curved and flat.
- Supplied in pairs.
-
Lift Assisted Leg Holders / Stirrups
- 270kg patient weight capacity.
- Gas lift assisted stirrups.
- 120 degrees boot rotation.
- Handle controlled abduction and adduction.
- Pad set included. Replacement pads can be found here: Stirrup Replacement Pads.
- Requires two size 33 clamps for mounting. We recommend using the Stirrup Clamp.
-
Prone Arm Support Pad
This product has multiple variants. The options may be chosen on the product page- Replacement Pad to suit Prone Arm Support
- Sold individually.
-
Gel Prone Headrest with Interchangeable Base
- Including three different heights to provide more customised positioning.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Universal Stirrup Trolley
- Stainless Steel construction with a polymer base.
- Accepts most brands of lift assisted leg holders.
- Holds one pair of leg holders.
-
Auto Locking Night Latch
The Auto Locking Night Latch is a highly secure and convenient lockcase designed to provide superior protection. Made primarily from durable steel, it offers unparalleled strength and durability. The 6 Lobe Pin-Torx anti-tamper stainless steel security screws further enhance its tamper-proof features.This product has multiple variants. The options may be chosen on the product page -
Accessory Storage Trolley
- Designed to store table accessories in pre-configured locations.
- Positioning devices stored in base or attached via clamps.
- A size rails as standard. Can be manufactured to suit any rail size and storage requirements. Contact us with your specific requirements.
-
Pinch Grip Anti-Ligature Handles
The Primera '729' Pinch Grip anti-ligature handle is a well-known design icon in the mental healthcare industry. Its stylish and sleek lines are popular among interior designers who aim to create welcoming environments. This design has been a staple in the Primera range since its beginning and is suitable for applications where manual dexterity is not a major consideration, such as elderly or infirm patients. The '729' has been purpose-designed and DHF TS001 tested, achieving the highest level (Grade 4) like all Primera products. The back plates are made from 3mm electro-plated steel, available in either radius or square format, with pin torx anti-tamper fixings included. Bolt-through fixings are also available for an additional fee.This product has multiple variants. The options may be chosen on the product page -
Resuscitation Trolley – Classic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 2x 125mm(D) Half Drawers Shelves: 50kg weight capacity per shelf Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
CLIK Load Release Toilet Roll Holder
The CLIK Load Release Toilet Roll Holder is a practical and safe solution for facilities with potential ligature risks. Its unique design offers the convenience of a traditional toilet roll holder while also ensuring safety. It features a bracket made of heat-treated stainless steel and a spring clip that can repeatedly release and reattach without compromising performance. This product prevents abnormal loads, such as attempted ligatures, from causing harm by allowing the holder to drop away and be easily reattached after the event. -
Multi Drawer Trolley
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 900mm(L) x 490mm(W) x 900mm(H). Drawer Measurements: 4x 100mm(D), 2x 150mm(D). Shelf: 50kg weight capacity. Castors: 2x 125mm Non-Locking Castors on back. 2x 125mm Locking Castors on front. -
Lightweight Leg Support
This product has multiple variants. The options may be chosen on the product page<ul><li>Designed to support the patients legs during transfer in and out of stirrups.</li><li>Manufactured to suit most tables, with options that slide over rails or insert into leg receptacles.</li><li>Weighs less than 5kg.</li><li>Includes replaceable vinyl cover. Replacement covers can be found here: <a href="https://staging.hipac.com.au/surgical-products/operating-theatre-tables-and-accessories/operating-table-accessories/replacement-pads/orthopaedic-lightweight-leg-support-pads-and-covers-2/">Lightweight Leg Support Pad</a>.</li><li>Custom Lightweight Leg Supports available. <a href="https://staging.hipac.com.au/contact-us/">Contact us</a> with your specific requirements.</li></ul> -
Contour Anti-Ligature Grab Rail, 700mm
The Contour Anti-Ligature Grab Rail measuring 700mm is the perfect solution for those seeking safety and hygiene. It's designed to be free of ligature points, whether installed vertically or horizontally. The sloping cap on one end ensures that nothing can be looped around the rail completely without slipping off. Additionally, its open end enables straightforward drainage, reducing the risk of infection and sanitation concerns that can arise from typical infilled rails.This product has multiple variants. The options may be chosen on the product page -
Form-A-Screen
- Flexible anaesthetic screen, shapes into any configuration.
- Requires two size 16 clamps for mounting.
-
Lithotomy Leg Holders
- Stainless steel construction.
- Requires two size 16 clamps for mounting.
- Requires pads and straps, sold separately.
- Replacement pads and straps can be found here: Lithotomy Leg Holder Pads.
- Disposable Lithotomy Straps are recommended for the safe positioning of the patient.
- Sold in pairs.
-
Gel Donut Head Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Disposable Stacked Head Ring
Designed for use with standard reusable tables or positioning pads, the Hipac single use, non-sterile stacked head rings are manufactured in Australia from high quality foam materials. As single use items, they minimise the risk of cross contamination and avoid the time and expense of cleaning for rapid turnaround of equipment. Supplied in a carton of 12 single use attacked head rings, they are ideal for any medical facility. -
Shoulder Rest Pads
- Pad set to suit early model Hipac Shoulder Rests, Pair.
- Vinyl-covered foam pad.
- Latex-Free.
-
Narrow Rotatable Lateral Support Pad
- Replacement pad made to suit Narrow Rotatable Lateral Support.
- Vinyl-covered foam pad.
- Latex-free.
-
Narrow Rotatable Lateral Support
- Vertical, horizontal and rotational adjustment.
- Can be used as shoulder rests when purchased as a pair.
- Size 17 vertical post.
- Requires one Size 17 Clamp for mounting.
- Requires Pad. Sold separately. Replacement Pads can be found here: Narrow Rotatable Lateral Support Pads.
-
Anti-Ligature Coat & Towel Hook
The Anti-Ligature Coat and Towel Hook is designed with safety in mind. The hook component is made of durable rubber and securely fixed in a stainless steel collar with two security screws. It has a low load release threshold to prevent ligature and is flexible in all directions, making it a safe choice for door use. The collar's chamfered design adds to its safety features.
