“Flush Pull Handle, Rectangle” has been added to your cart. View cart
You may be interested in…
-

Round Lateral Support Pad
- Replacement Pad made to suit Round Lateral Support.
- Seamless Pad.
-



Universal Bar Clamps
Operating theatre tables are fitted with side rails to which positioning equipment is attached. These rails range in size according to their make and origin. In order to achieve stable positioning, the correct sized clamp must be used.This product has multiple variants. The options may be chosen on the product page- Accepts most brands of gas assisted stirrups.
- Accepts up to size 17 round post.
- Accepts size 33 and 34 rectangular bar.
- Lightweight aluminium construction.
- Clamps to suit A size rails are direct-on where slots are fitted in side rail.
-



Surgical Table Arm Guard
- Fully radiolucent.
- Slips under table mattress and is supported by patient weight.
- Requires pad, sold separately. Replacement pads are available Vinyl Pad, Gel Pad.
-



Sapphire Headlight Battery Set
- Supplied as a pack of 2 Sapphire LiPO batteries
- Recommended to replace every 2 years of use (depending on usage)
- Overcharge, overcurrent and overdischarge protection circuits integrated
- The cell is UL 1642 approved
- Expected cycle life > 500 cycles / > 70% of initial capacity will remain
-



Chrome Headlight Battery Set
- Supplied as a pack of 2 Chrome batteries.
- Recommended to replace every 2 years of use (depending on usage).
- 2 Lithium Polymer batteries last up to 8 hours of continuous output.
-



Flush Pull Handle, Round
The Flush Pull Handle in a 40mm round shape, is designed to be recessed for a sleek finish. Made of high-quality satin stainless steel with concealed screws, this handle is both durable and visually appealing. Choose from various shapes including the square and rectangle to fit the specific requirements of your facility. -



Recessed Anti-Ligature Pull Handle
The Recessed Anti-Ligature Pull Handle is a compact option from the Primera pull handle range, measuring only 90mm x 106mm and constructed from 3mm solid steel. The '726' handle is suitable for a variety of applications, from cupboards to doors in units with challenging behaviour, due to its lack of protrusions. It meets the requirements of TS001 at level 4 and is available in Satin Stainless Steel electro-plated finish as a standard product, with other finishes available upon request. The handle is also supplied with pin torx anti-tamper fixing screws for added security. -



Wide Armboard
- Radiolucent top.
- Height adjustable.
- Requires two size 16 clamps for mounting.
- Requires pad, pad sold separately. Replacement pads can be found here: Wide Armboard Pad.
-



Narrow Rotatable Lateral Support Pad
- Replacement pad made to suit Narrow Rotatable Lateral Support.
- Vinyl-covered foam pad.
- Latex-free.
-



Elephants Trunk Pull Handle
The Elephants Trunk Pull Handle is a robust and solid cast product designed for applications where manual dexterity is a primary concern. Its sleek design provides a stylish alternative to the commonly known 'Witches Nose' handle. This handle comes in two back-plate options, the first being a flat plate for either new doors or retrofit applications, while the second is mounted on a recessed dish, providing more available space behind the handle but requiring more detailed door preparation prior to installation. Although not DHF TS001 compliant, it's suitable for applications where there is less challenging behaviour or installed with back-to-back bolt-through fixings. Its dimensions are 205mm x 90mm x 3mm, and it's tested to Level B4 TS001 Grade for anti-ligature purposes.This product has multiple variants. The options may be chosen on the product page -



Wide Lateral Support Pads
This product has multiple variants. The options may be chosen on the product page- Made to suit Wide Lateral Support.
- Two pad types available: flat or curved.
- Seamless vinyl-covered foam.
-



Pinch Grip Anti-Ligature Handles
The Primera '729' Pinch Grip anti-ligature handle is a well-known design icon in the mental healthcare industry. Its stylish and sleek lines are popular among interior designers who aim to create welcoming environments. This design has been a staple in the Primera range since its beginning and is suitable for applications where manual dexterity is not a major consideration, such as elderly or infirm patients. The '729' has been purpose-designed and DHF TS001 tested, achieving the highest level (Grade 4) like all Primera products. The back plates are made from 3mm electro-plated steel, available in either radius or square format, with pin torx anti-tamper fixings included. Bolt-through fixings are also available for an additional fee.This product has multiple variants. The options may be chosen on the product page -



Emergency Pull Handle
The Emergency Pull Handle is a vital accessory in any healthcare facility with anti-barricade doors. It provides additional grip to overcome any internal force generated by a patient holding the handle from the inside of the door, preventing clinical staff access. By sliding the Emergency Pull Handle over the pinch grip handle, the door can be opened outwardly by pulling it. The length of the handle is designed to allow multiple staff members to participate in pulling the door, ensuring swift entry to the barricaded room. The Emergency Pull Handle is compatible only with 729 handles. -



Narrow Rotatable Lateral Support
- Vertical, horizontal and rotational adjustment.
- Can be used as shoulder rests when purchased as a pair.
- Size 17 vertical post.
- Requires one Size 17 Clamp for mounting.
- Requires Pad. Sold separately. Replacement Pads can be found here: Narrow Rotatable Lateral Support Pads.
-



Gel Donut Head Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



4-Bay Desktop Charger
- Charges up to 4 Headlight batteries at a time.
- Charge time for unit: 11hrs
-



Patient Restraint Strap
This product has multiple variants. The options may be chosen on the product page- Straps secure to side rail with or without hooks.
- Latex free.
- Optional Mounting Hooks are available, not included.
- 2 sizes available.
-



1-Bay Desktop Charger
- Charges 1 battery at a time
- Charge time: 3hrs
- Used for MedLED Sapphire Headlight batteries
-



Flush Pull Handle, Square
Square Flush Pull Handle measures 50mm on each side, providing a recessed design with a satin stainless steel finish that gives a sleek appearance. The handle is held in place with concealed screws for a clean and professional look. Choose from different shapes to fit your facility's requirements: Round, or Rectangle. -



Chrome LED Surgical Headlight
The MedLED Chrome® is the next frontier and the fibre optic headlight replacement. The Chrome headlight is the next generation of the previously supplied Sapphire Headlight. It is so efficient that surgery can be done cord-free at Xenon or Halogen brightness. Alternatively, while competing LED headlights are convenient and affordable, they still fall short with fragile tethered belt battery packs and other problems. At 275,000 LUX with the MC7 Pro Bezel, MedLED's Chrome® eliminates these tradeoffs once and for all. Alternative bezels available including the MC3 (100,000 lux) MC6 (200,000 lux) and the MC7 Pro (275,000 lux) the brightest Surgical LED Headlight option available on the market. Charging times are 6.5 hours from the headlight. 10 hours from the single-bay or four-bay charger.This product has multiple variants. The options may be chosen on the product page -



Shoulder Rest Pads
- Pad set to suit early model Hipac Shoulder Rests, Pair.
- Vinyl-covered foam pad.
- Latex-Free.
-



Rotatable Shoulder Rest Pads
This product has multiple variants. The options may be chosen on the product page- Replacement pads to suit Rotatable Shoulder Rest.
- Seamless vinyl-covered foam pad.
- Two pad types available - curved and flat.
- Supplied in pairs.
-



Slip In Side Support Pad
- Replacement Pad to suit Slip Side Support
-



Hourglass Arm Table
- Radiolucent top.
- Height adjustable telescopic leg provides additional support.
- Requires two size 16 clamps for mounting.
- Requires pad, sold separately. Replacement pads can be found here: Hourglass Arm Table Pad.
