May, 2023
Cart
You may be interested in…
-
Gillespie Pillow
- Vinyl-covered foam positioning device.
- Contoured support, shaped to assist in prone patient positioning.
- All seams are chemically sealed.
-
Emergency Pull Handle
The Emergency Pull Handle is a vital accessory in any healthcare facility with anti-barricade doors. It provides additional grip to overcome any internal force generated by a patient holding the handle from the inside of the door, preventing clinical staff access. By sliding the Emergency Pull Handle over the pinch grip handle, the door can be opened outwardly by pulling it. The length of the handle is designed to allow multiple staff members to participate in pulling the door, ensuring swift entry to the barricaded room. The Emergency Pull Handle is compatible only with 729 handles. -
Resuscitation Trolley – Combo
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 4x 125mm(D) Half Drawers, 1x 125mm(D) Full Width Drawer Shelves: 50kg weight capacity per shelf Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Universal Bar Clamps
Operating theatre tables are fitted with side rails to which positioning equipment is attached. These rails range in size according to their make and origin. In order to achieve stable positioning, the correct sized clamp must be used.This product has multiple variants. The options may be chosen on the product page- Accepts most brands of gas assisted stirrups.
- Accepts up to size 17 round post.
- Accepts size 33 and 34 rectangular bar.
- Lightweight aluminium construction.
- Clamps to suit A size rails are direct-on where slots are fitted in side rail.
-
Anaesthetic Trolley – Deluxe
Australian Made 304 Grade Stainless Steel Trolley with two side shelves, key lock, soft closing drawers, side and back rails and four precision ball bearing castors. Trolley Measurements: 900mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 2x 75mm(D), 2x 100mm(D), 2x 150mm(D) x 600mm(W). Shelves: 50kg weight capacity per shelf Castors: 2 x 125mm Non-Locking Castors 2 x 125mm Locking Castors -
Single Leg Prepper
- Stainless steel construction.
- Requires one size 16 clamp for mounting.
- Requires pad, sold separately. Replacement pads can be found here: Leg Prepper Pads.
-
Orthopaedic Lightweight Leg Support
- Radiolucent carbon fibre construction.
- Designed to suit Amsco / Steris 777 orthopaedic traction frames.
- Requires pad, pad sold separately. Replacement pad can be found here: Orthopaedic Lightweight Leg Support Pads.
- Includes Cover. Replacement Covers can be found here: Orthopaedic Lightweight Leg Support Cover
-
Prone Anaesthetic Pillow
- Designed to provide support for prone positioning, allowing for safe positioning of intubated patients.
- Twin layered foam with soft vinyl cover.
-
Single, Variable-Focus 24 Inch LED Surgical Lighting Fixture
All Aurora Four surgical lighting systems offer the ability to control focus and intensity directly from the sterile handle. With a simple turn of the handle, the focal point is moved up or down extending the working distance without adjusting the spot size or moving the light head. -
Bulk Collection Trolley
Australian Made 304 Grade Stainless Steel Trolley. Measurements: 900mm(L) x 600mm(W) x 950mm(H). Bottom Shelf: 50kg weight capacity. Castors: 4x 125mm Non-Locking Castors. -
Anaesthetic Trolley – Classic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 600mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 1x 250mm(D), 3x 125mm(D) Shelf: 50kg weight capacity Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Elephants Trunk Pull Handle
The Elephants Trunk Pull Handle is a robust and solid cast product designed for applications where manual dexterity is a primary concern. Its sleek design provides a stylish alternative to the commonly known 'Witches Nose' handle. This handle comes in two back-plate options, the first being a flat plate for either new doors or retrofit applications, while the second is mounted on a recessed dish, providing more available space behind the handle but requiring more detailed door preparation prior to installation. Although not DHF TS001 compliant, it's suitable for applications where there is less challenging behaviour or installed with back-to-back bolt-through fixings. Its dimensions are 205mm x 90mm x 3mm, and it's tested to Level B4 TS001 Grade for anti-ligature purposes.This product has multiple variants. The options may be chosen on the product page -
Pinch Grip Anti-Ligature Handles
The Primera '729' Pinch Grip anti-ligature handle is a well-known design icon in the mental healthcare industry. Its stylish and sleek lines are popular among interior designers who aim to create welcoming environments. This design has been a staple in the Primera range since its beginning and is suitable for applications where manual dexterity is not a major consideration, such as elderly or infirm patients. The '729' has been purpose-designed and DHF TS001 tested, achieving the highest level (Grade 4) like all Primera products. The back plates are made from 3mm electro-plated steel, available in either radius or square format, with pin torx anti-tamper fixings included. Bolt-through fixings are also available for an additional fee.This product has multiple variants. The options may be chosen on the product page -
Leg Holder with Seamless Foam Pad
This product has multiple variants. The options may be chosen on the product page- Pair of leg holders with ball joint adjustment.
- Pads included.
- Requires two clamps for mounting.
-
Form-A-Screen
- Flexible anaesthetic screen, shapes into any configuration.
- Requires two size 16 clamps for mounting.
-
Trapezoid Positioner
- Vinyl covered foam.
- All seams chemically sealed.
-
Anaesthetic Pillow
- Vinyl covered with chemically sealed seams.
-
One Drawer Instrument Trolley
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Size Options: 490mm(L) x 490mm(W) x 900mm(H) 600mm(L) x 490mm(W) x 900mm(H) 750mm(L) x 490mm(W) x 900mm(H) 900mm(L) x 490mm(W) x 900mm(H) Castors: 2x 75mm Non-Locking Castors on back 2x 75mm Locking Castors on front Drawer Dimensions: 1 x 125mm(D). Shelves: 50kg weight capacity per shelf. Available Accessories: Drawer dividers Drawer linersThis product has multiple variants. The options may be chosen on the product page -
Recessed Anti-Ligature Pull Handle
The Recessed Anti-Ligature Pull Handle is a compact option from the Primera pull handle range, measuring only 90mm x 106mm and constructed from 3mm solid steel. The '726' handle is suitable for a variety of applications, from cupboards to doors in units with challenging behaviour, due to its lack of protrusions. It meets the requirements of TS001 at level 4 and is available in Satin Stainless Steel electro-plated finish as a standard product, with other finishes available upon request. The handle is also supplied with pin torx anti-tamper fixing screws for added security. -
Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -
Dual, Variable-Focus 30/24 Inch LED Surgical Lighting Fixture with Dual Monitor Arms
All Aurora IV surgical lighting systems offer the ability to control focus and intensity directly from the sterile handle. With a simple turn of the handle, the focal point is moved up or down extending the working distance without adjusting the spot size or moving the light head. -
Utility Trolley
Australian Made 304 Grade Stainless Steel Trolley supplied with Polyethylene Bins. Measurements: 820mm(L) x 490mm(W) x 910mm(H). Bin Sizes: Top - 640mm(L) x 410mm(W) x 270mm(H) Bottom - 640mm(L) x 410mm(W) x 210mm(H) Castors: 4x 125mm Non-Locking Castors -
Orthopaedic Popliteal Support
This product has multiple variants. The options may be chosen on the product page- To suit Amsco/Steris and 777 or Ortho Trax Orthopaedic Traction Frames.
- Size 35 post.
- Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Popliteal Support Pad.
-
Lift Assisted Leg Holders / Stirrups
- 270kg patient weight capacity.
- Gas lift assisted stirrups.
- 120 degrees boot rotation.
- Handle controlled abduction and adduction.
- Pad set included. Replacement pads can be found here: Stirrup Replacement Pads.
- Requires two size 33 clamps for mounting. We recommend using the Stirrup Clamp.
-
List Cart
<ul><li>Australian Made 304 Grade Stainless Steel Trolley with hinged doors, concealed push handle, bumper surround andadjustable shelves.</li><li>Top Shelf: 50kg weight capacity</li><li>Castors: 4x 125mm Non-Locking Castors</li></ul>Measurements: 1200mm(L) x 600mm(W) x 1430mm(H) -
Flush Pull Handle, Square
Square Flush Pull Handle measures 50mm on each side, providing a recessed design with a satin stainless steel finish that gives a sleek appearance. The handle is held in place with concealed screws for a clean and professional look. Choose from different shapes to fit your facility's requirements: Round, or Rectangle. -
Hip Abduction Pillow
This product has multiple variants. The options may be chosen on the product page- Foam positioner designed for hip abduction positioning.
- Includes hook and loop straps, designed to wrap around the patient's legs and secure to the back of the pad.
-
Vacuform Bean Bags
The secret of perfected adaption to the body by VACUFORM surgical mattresses is microballs of styrofoam, which are stabilised by vacuum to give a lasting, completely supportive form. Reducing the diameter of the filter balls by a fifth enables more precise adaption of the surgical mattress to the body. The MicroSpace system significantly increases the feeling of physical comfort for the patient compared to conventional fillings.This product has multiple variants. The options may be chosen on the product page -
Foam Laminectomy Rest
<ul><li>Vinyl covered foam positioning device.</li><li>Contoured support, shaped to assist in prone patient positioning.</li><li>All seams chemically sealed.</li></ul> -
Resuscitation Trolley – Deluxe
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 6x 125mm(D) Half Drawers, 1x 250mm(D) Full Width Drawer Shelf: 50kg weight capacity Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
2 Shelf Clearing Trolley
- Australian Made 304 Grade Stainless Steel Trolley with Two Shelves with double safety folds to all shelf edges, undershelf bracing and four precision ball bearing castors.
- Shelves: 50kg weight capacity per shelf.
- Castors: 4x 125mm Non-Locking Drawers.
-
Orthopaedic Sacral Rest
This product has multiple variants. The options may be chosen on the product page- Designed to suit Amsco/Steris and 777 orthopaedic traction frames.
- Radiolucent carbon fibre construction.
- Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Sacral Rest Pad.
-
Flush Pull Handle, Round
The Flush Pull Handle in a 40mm round shape, is designed to be recessed for a sleek finish. Made of high-quality satin stainless steel with concealed screws, this handle is both durable and visually appealing. Choose from various shapes including the square and rectangle to fit the specific requirements of your facility.
