May, 2023
Cart
You may be interested in…
-
IV Pole – Polymer Base
Australian Made 304 Grade Stainless Steel IV Pole with Polymer Base. Measurements: Product Weight: 5.1kg. Base Diameter: 560mm. Safe Working Height Range: 1350 - 2100mm. Safe Working Load: 6kg per hook.This product has multiple variants. The options may be chosen on the product page -
Contour Anti-Ligature 90 Degree Grab Rail, 700mm x 900mm
The Contour Anti-Ligature Grab Rail is designed to be free of ligature points whether installed vertically or horizontally. It features a sloping cap on one end to prevent anything from being looped completely around the rail. The open end of the rail allows for easy drainage, which eliminates hygiene and infection control issues typically associated with traditional infilled rails. This grab rail is 700mm x 900mm in size.This product has multiple variants. The options may be chosen on the product page -
Gel Paediatric Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't leak if punctured.
- Won't bottom out.
- Reduces friction & shear.
- Aides in pressure redistribution.
-
Foot Rest Pad
This product has multiple variants. The options may be chosen on the product page- Replacement Pad to suit Foot Rest.
- Hooks and loop attachment.
- Custom options available. Contact us with your specific requirements.
-
Flush Pull Handle, Rectangle
Rectangular Flush Pull Handle, with a satin stainless steel finish and measuring 120mm x 40mm, is held in place with concealed screws. This recessed handle is available in a variety of shapes to fit your specific facility requirements, including round, square, and rectangular. -
Elephants Trunk Pull Handle
The Elephants Trunk Pull Handle is a robust and solid cast product designed for applications where manual dexterity is a primary concern. Its sleek design provides a stylish alternative to the commonly known 'Witches Nose' handle. This handle comes in two back-plate options, the first being a flat plate for either new doors or retrofit applications, while the second is mounted on a recessed dish, providing more available space behind the handle but requiring more detailed door preparation prior to installation. Although not DHF TS001 compliant, it's suitable for applications where there is less challenging behaviour or installed with back-to-back bolt-through fixings. Its dimensions are 205mm x 90mm x 3mm, and it's tested to Level B4 TS001 Grade for anti-ligature purposes.This product has multiple variants. The options may be chosen on the product page -
Gel Donut Head Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Rotatable Shoulder Rests
- Set of shoulder rests designed to prevent patient slide when in Trendelenburg.
- Curved and flat pads are included. Replacement pads can be found here: Rotatable Shoulder Rest Pads.
- Requires two Size 17 clamps for mounting.
-
IV Pole – Aluminium Base
Australian Made 304 Grade Stainless Steel IV Pole with Aluminium Base. Measurements: Base Diameter: 560mm Safe Working Height Range: 1350 - 2100mm Product Weight: 7.14kg Safe Working Load: 6kg per hookThis product has multiple variants. The options may be chosen on the product page -
Ortho Drape Support
- To suit Amsco Steris and 777 Orthopaedic Traction Frames.
- Stainless steel and vinyl construction.
-
Flush Pull Handle, Square
Square Flush Pull Handle measures 50mm on each side, providing a recessed design with a satin stainless steel finish that gives a sleek appearance. The handle is held in place with concealed screws for a clean and professional look. Choose from different shapes to fit your facility's requirements: Round, or Rectangle. -
-
Perineal Post Pad
This product has multiple variants. The options may be chosen on the product page- Replacement pad to suit Perineal Post.
- Seamless vinyl covering.
-
IV Pole – Offset Post
Australian Made 304 Grade Stainless Steel IV Pole with Offset Post, Push Handle and Aluminium Base. Measurements: Safe Working Height Range: 1350 - 2050mm Base Diameter: 560mm Safe Working Load: 6kg per hook Product Weight: 6kgThis product has multiple variants. The options may be chosen on the product page -
Orthopaedic Sacral Rest
This product has multiple variants. The options may be chosen on the product page- Designed to suit Amsco/Steris and 777 orthopaedic traction frames.
- Radiolucent carbon fibre construction.
- Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Sacral Rest Pad.
-
Large Orthopaedic Sacral Rest
This product has multiple variants. The options may be chosen on the product page- Designed to suit Amsco/Steris and 777 orthopaedic traction frames.
- Radiolucent carbon fibre construction.
- Available with one or three cutouts.
- Requires pad, pad sold separately. Replacement pads can be found here: Large Sacral Rest Pad.
-
Recessed Anti-Ligature Pull Handle
The Recessed Anti-Ligature Pull Handle is a compact option from the Primera pull handle range, measuring only 90mm x 106mm and constructed from 3mm solid steel. The '726' handle is suitable for a variety of applications, from cupboards to doors in units with challenging behaviour, due to its lack of protrusions. It meets the requirements of TS001 at level 4 and is available in Satin Stainless Steel electro-plated finish as a standard product, with other finishes available upon request. The handle is also supplied with pin torx anti-tamper fixing screws for added security. -
Gillespie Pillow
- Vinyl-covered foam positioning device.
- Contoured support, shaped to assist in prone patient positioning.
- All seams are chemically sealed.
-
Foam Laminectomy Rest
<ul><li>Vinyl covered foam positioning device.</li><li>Contoured support, shaped to assist in prone patient positioning.</li><li>All seams chemically sealed.</li></ul> -
Adjustable Shoulder Rests
This product has multiple variants. The options may be chosen on the product page- Set of shoulder rests designed to prevent patient slide when in Trendelenburg.
- Seamless direct-on pads included. Replacement pads can be found here: Adjustable Shoulder Rest Pads.
- Requires two clamps for mounting.
-
Narrow Rotatable Lateral Support
- Vertical, horizontal and rotational adjustment.
- Can be used as shoulder rests when purchased as a pair.
- Size 17 vertical post.
- Requires one Size 17 Clamp for mounting.
- Requires Pad. Sold separately. Replacement Pads can be found here: Narrow Rotatable Lateral Support Pads.
-
Orthopaedic Lightweight Leg Support
- Radiolucent carbon fibre construction.
- Designed to suit Amsco / Steris 777 orthopaedic traction frames.
- Requires pad, pad sold separately. Replacement pad can be found here: Orthopaedic Lightweight Leg Support Pads.
- Includes Cover. Replacement Covers can be found here: Orthopaedic Lightweight Leg Support Cover
-
IV Pole – Stacking
IV Pole - Stacking Australian Made 304 Grade Stainless Steel IV Pole with Stacking Base. Base design allows multiple IV Poles to be stacked together to make it easier for staff when transporting and to minimise storage size. Measurements: Safe Working Height Range: 1350 - 2050mm Base Diameter: 560mm Safe Working Load: 6kg per hook Product Weight: 9.16kgThis product has multiple variants. The options may be chosen on the product page -
Emergency Pull Handle
The Emergency Pull Handle is a vital accessory in any healthcare facility with anti-barricade doors. It provides additional grip to overcome any internal force generated by a patient holding the handle from the inside of the door, preventing clinical staff access. By sliding the Emergency Pull Handle over the pinch grip handle, the door can be opened outwardly by pulling it. The length of the handle is designed to allow multiple staff members to participate in pulling the door, ensuring swift entry to the barricaded room. The Emergency Pull Handle is compatible only with 729 handles. -
Bowl Stands
Hipac's Australian-made Stainless Steel Bowl Stand features a polymer base and is designed to hold a 300mm diameter bowl. Available in single and double stands, it offers flexibility to healthcare settings. Bowls are sold separately, and the stand measures 560mm(L) x 560mm(W) x 850mm(H). Feel free to reach out to us and explore the options we offer for customising and creating unique products to meet your specific requirements.This product has multiple variants. The options may be chosen on the product page -
Wide Lateral Support Pads
This product has multiple variants. The options may be chosen on the product page- Made to suit Wide Lateral Support.
- Two pad types available: flat or curved.
- Seamless vinyl-covered foam.
