May, 2023
Cart
You may be interested in…
-
Flush Pull Handle, Rectangle
Rectangular Flush Pull Handle, with a satin stainless steel finish and measuring 120mm x 40mm, is held in place with concealed screws. This recessed handle is available in a variety of shapes to fit your specific facility requirements, including round, square, and rectangular. -
Narrow Rotatable Lateral Support
- Vertical, horizontal and rotational adjustment.
- Can be used as shoulder rests when purchased as a pair.
- Size 17 vertical post.
- Requires one Size 17 Clamp for mounting.
- Requires Pad. Sold separately. Replacement Pads can be found here: Narrow Rotatable Lateral Support Pads.
-
Prone Anaesthetic Pillow
- Designed to provide support for prone positioning, allowing for safe positioning of intubated patients.
- Twin layered foam with soft vinyl cover.
-
Gel Donut Head Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Emergency Pull Handle
The Emergency Pull Handle is a vital accessory in any healthcare facility with anti-barricade doors. It provides additional grip to overcome any internal force generated by a patient holding the handle from the inside of the door, preventing clinical staff access. By sliding the Emergency Pull Handle over the pinch grip handle, the door can be opened outwardly by pulling it. The length of the handle is designed to allow multiple staff members to participate in pulling the door, ensuring swift entry to the barricaded room. The Emergency Pull Handle is compatible only with 729 handles. -
Wide Lateral Support Pads
This product has multiple variants. The options may be chosen on the product page- Made to suit Wide Lateral Support.
- Two pad types available: flat or curved.
- Seamless vinyl-covered foam.
-
Round Lateral Support Pad
- Replacement Pad made to suit Round Lateral Support.
- Seamless Pad.
-
Gel Horseshoe Head Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Lateral Hip Positioner
- Patient positioning device designed to assist the surgical team correctly position patient for hip surgery.
- Full stainless steel construction, with vinyl covered foam pads with integrated lateral end stops.
- Horizontal and vertical adjustment.
- Requires two size 16 clamps.
- Direct-on pads are included. Replacement pads can be found here: Lateral Hip Positioner Pads.
-
Recessed Anti-Ligature Pull Handle
The Recessed Anti-Ligature Pull Handle is a compact option from the Primera pull handle range, measuring only 90mm x 106mm and constructed from 3mm solid steel. The '726' handle is suitable for a variety of applications, from cupboards to doors in units with challenging behaviour, due to its lack of protrusions. It meets the requirements of TS001 at level 4 and is available in Satin Stainless Steel electro-plated finish as a standard product, with other finishes available upon request. The handle is also supplied with pin torx anti-tamper fixing screws for added security. -
Horseshoe Head Rest
- Seamless vinyl covered foam with solid base and indentation for neck.
-
Right Angle Lateral Support Pad
- Replacement pad made to suit Right Angle Lateral Support.
- Vinyl-covered foam pad.
- Mounted via Hook and Loop attachment.
-
Straight Lateral Support
- Stainless steel construction.
- Adjustable vertically and horizontally.
- Requires one Size 34 Clamp for mounting
- Requires pad. Pad sold separately. Replacement pads can be found here: Straight Lateral Support Pads.
-
Prone Arm Support
- Fully radiolucent.
- Requires two pads, pads sold separately. Replacement pads can be found here: Prone Arm Support Pad.
-
Elephants Trunk Pull Handle
The Elephants Trunk Pull Handle is a robust and solid cast product designed for applications where manual dexterity is a primary concern. Its sleek design provides a stylish alternative to the commonly known 'Witches Nose' handle. This handle comes in two back-plate options, the first being a flat plate for either new doors or retrofit applications, while the second is mounted on a recessed dish, providing more available space behind the handle but requiring more detailed door preparation prior to installation. Although not DHF TS001 compliant, it's suitable for applications where there is less challenging behaviour or installed with back-to-back bolt-through fixings. Its dimensions are 205mm x 90mm x 3mm, and it's tested to Level B4 TS001 Grade for anti-ligature purposes.This product has multiple variants. The options may be chosen on the product page -
Flush Pull Handle, Square
Square Flush Pull Handle measures 50mm on each side, providing a recessed design with a satin stainless steel finish that gives a sleek appearance. The handle is held in place with concealed screws for a clean and professional look. Choose from different shapes to fit your facility's requirements: Round, or Rectangle. -
Contour Anti-Ligature 90 Degree Grab Rail, 700mm x 900mm
The Contour Anti-Ligature Grab Rail is designed to be free of ligature points whether installed vertically or horizontally. It features a sloping cap on one end to prevent anything from being looped completely around the rail. The open end of the rail allows for easy drainage, which eliminates hygiene and infection control issues typically associated with traditional infilled rails. This grab rail is 700mm x 900mm in size.This product has multiple variants. The options may be chosen on the product page -
Donut Head Ring
This product has multiple variants. The options may be chosen on the product page- Seamless vinyl coated foam head ring.
