May, 2023
Cart
You may be interested in…
-
Narrow Rotatable Lateral Support Pad
- Replacement pad made to suit Narrow Rotatable Lateral Support.
- Vinyl-covered foam pad.
- Latex-free.
-
Emergency Pull Handle
The Emergency Pull Handle is a vital accessory in any healthcare facility with anti-barricade doors. It provides additional grip to overcome any internal force generated by a patient holding the handle from the inside of the door, preventing clinical staff access. By sliding the Emergency Pull Handle over the pinch grip handle, the door can be opened outwardly by pulling it. The length of the handle is designed to allow multiple staff members to participate in pulling the door, ensuring swift entry to the barricaded room. The Emergency Pull Handle is compatible only with 729 handles. -
Flush Pull Handle, Rectangle
Rectangular Flush Pull Handle, with a satin stainless steel finish and measuring 120mm x 40mm, is held in place with concealed screws. This recessed handle is available in a variety of shapes to fit your specific facility requirements, including round, square, and rectangular. -
Cardiac Head Pillow
This product has multiple variants. The options may be chosen on the product page- Memory foam top with comfort series vinyl.
-
Disposable Body Support Bolster
A single use, non-sterile body support bolster manufactured in Australia from high quality foam. Avoiding the risk of cross contamination and the time and expense of cleaning maintenance, they are perfect for busy theatres and offer an economical alternative. Supplied in a carton of 12 singe use body support bolsters, each is 450mm (Length) x 175mm (Diameter) x 88mm (Height). -
Tubular Support
- Simple vertical and horizontal adjustment.
- Requires one clamp, size 34.
- Requires pad. Pad sold separately. Replacement Pads can be found here: Tubular Support Pad.
-
Gel Hand Protector
- Encloses hand and secures with hook and loop straps.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -
Gel Heel Cup
- Sold individually.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Gel Supine Head Pad with Dish
This product has multiple variants. The options may be chosen on the product page- Self centering dish, conforms to the patient's head while offering support.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear
- Aides in Pressure Redistribution.
-
Vertical Support Pad
- Pad to suit Vertical Support and Popliteal Support.
- Seamless vinyl-covered foam.
-
Gel Contoured Head Pad
- 32mm(H) contour.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Vinyl Sandbags
This product has multiple variants. The options may be chosen on the product page- Provides stable patient positioning.
- Covered in black vinyl.
- Available with or without an eyelet for use while applying traction.
- Available with custom labelling.
-
Tubular Body Support
- Simple vertical and horizontal adjustment.
- Requires one Size 34 Clamp for mounting
- Requires pad. Pad sold separately. Replacement pads can be found here: Tubular Body Support Pads.
-
Flush Pull Handle, Round
The Flush Pull Handle in a 40mm round shape, is designed to be recessed for a sleek finish. Made of high-quality satin stainless steel with concealed screws, this handle is both durable and visually appealing. Choose from various shapes including the square and rectangle to fit the specific requirements of your facility. -
Vertical Support
- Adjusts vertically.
- Requires one Size 16 clamp for mounting.
- Requires pad. Pad sold separately. Replacement Pads can be found here: Vertical Support Pad
-
Hook and Loop Restraint Straps
This product has multiple variants. The options may be chosen on the product page- Two-piece straps with stainless steel side rail mounts.
- Slides over table rails.
-
Patient Support Wedges
This product has multiple variants. The options may be chosen on the product page- Vinyl covered foam.
- All seams chemically sealed.
- Custom options available, including size, colour, density, etc. Contact us for more information.
-
Patient Support Maternity Wedge
- Vinyl covered foam, all seams chemically sealed.
- Custom options available, including size, colour, density, etc. Contact us with your specific requirements.
-
Disposable Patient Care Kit to suit Jackson Table
A complete, single use patient care kit designed for use with the Jackson Table. Manufactured in Australia, they minimise the risk of cross contamination and avoid extensive cleaning.This product has multiple variants. The options may be chosen on the product page -
Gel Sandbags
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution
-
Round Lateral Support Pad
- Replacement Pad made to suit Round Lateral Support.
- Seamless Pad.
-
Disposable Face Rest Covers to suit Epidural Positioning Device
Our Sani-Cover Medical Grade Disposable Face Rest Covers are designed for use with our Epidural Positioning Device (EPD) or for any crescent-shaped face rest cushion. The 25 gsm, spunbound fabric provides a comfortable, sanitary barrier for the face during care and treatment. Latex-free elastic ensures the cover remains in place but allows for quick and easy changeover between patients. The Face Rest Covers also fit the Epidural Positioning Device (EPD) arm rest. Sold in packs of 50. -
Recessed Anti-Ligature Pull Handle
The Recessed Anti-Ligature Pull Handle is a compact option from the Primera pull handle range, measuring only 90mm x 106mm and constructed from 3mm solid steel. The '726' handle is suitable for a variety of applications, from cupboards to doors in units with challenging behaviour, due to its lack of protrusions. It meets the requirements of TS001 at level 4 and is available in Satin Stainless Steel electro-plated finish as a standard product, with other finishes available upon request. The handle is also supplied with pin torx anti-tamper fixing screws for added security. -
Gel Flat Bottom Chest Rolls
This product has multiple variants. The options may be chosen on the product page- Used to protect the patients chest while in prone position.
- Also used for a variety of positioning needs including oblique and lateral stabilisation.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Disposable Body Support Roll
A single use, non-sterile body support roll manufactured in Australia from high quality foam. Avoiding the risk of cross contamination and the time and expense of cleaning maintenance, they are perfect for busy theatres and offer an economical alternative. Supplied in a carton of 12 singe use body support rolls, each roll is 450mm (Length) x 175mm (Diameter). -
Disposable Stacked Head Ring
Designed for use with standard reusable tables or positioning pads, the Hipac single use, non-sterile stacked head rings are manufactured in Australia from high quality foam materials. As single use items, they minimise the risk of cross contamination and avoid the time and expense of cleaning for rapid turnaround of equipment. Supplied in a carton of 12 single use attacked head rings, they are ideal for any medical facility. -
Elephants Trunk Pull Handle
The Elephants Trunk Pull Handle is a robust and solid cast product designed for applications where manual dexterity is a primary concern. Its sleek design provides a stylish alternative to the commonly known 'Witches Nose' handle. This handle comes in two back-plate options, the first being a flat plate for either new doors or retrofit applications, while the second is mounted on a recessed dish, providing more available space behind the handle but requiring more detailed door preparation prior to installation. Although not DHF TS001 compliant, it's suitable for applications where there is less challenging behaviour or installed with back-to-back bolt-through fixings. Its dimensions are 205mm x 90mm x 3mm, and it's tested to Level B4 TS001 Grade for anti-ligature purposes.This product has multiple variants. The options may be chosen on the product page
