May, 2023
Cart
You may be interested in…
-
Elephants Trunk Pull Handle
The Elephants Trunk Pull Handle is a robust and solid cast product designed for applications where manual dexterity is a primary concern. Its sleek design provides a stylish alternative to the commonly known 'Witches Nose' handle. This handle comes in two back-plate options, the first being a flat plate for either new doors or retrofit applications, while the second is mounted on a recessed dish, providing more available space behind the handle but requiring more detailed door preparation prior to installation. Although not DHF TS001 compliant, it's suitable for applications where there is less challenging behaviour or installed with back-to-back bolt-through fixings. Its dimensions are 205mm x 90mm x 3mm, and it's tested to Level B4 TS001 Grade for anti-ligature purposes.This product has multiple variants. The options may be chosen on the product page -
Flush Pull Handle, Square
Square Flush Pull Handle measures 50mm on each side, providing a recessed design with a satin stainless steel finish that gives a sleek appearance. The handle is held in place with concealed screws for a clean and professional look. Choose from different shapes to fit your facility's requirements: Round, or Rectangle. -
Contour Anti-Ligature 90 Degree Grab Rail, 700mm x 900mm
The Contour Anti-Ligature Grab Rail is designed to be free of ligature points whether installed vertically or horizontally. It features a sloping cap on one end to prevent anything from being looped completely around the rail. The open end of the rail allows for easy drainage, which eliminates hygiene and infection control issues typically associated with traditional infilled rails. This grab rail is 700mm x 900mm in size.This product has multiple variants. The options may be chosen on the product page -
Jaw Elevation Device (JED)
- Maintains an open airway in sedated or anesthetised patients without the need for airway instrumentation.
- Frees medical personnel from the need to hold the jaw manually in sedated or obtunded patients.
- When left in place after a procedure, reduces post-operative airway complications.
- Non-invasive and easy to apply.
- Provides reusable head support, eliminating the need for blankets, towels or donuts.
-
CLIK Load Release Soap Dish
The CLIK Load Release Soap Dish is a smart solution that offers the functionality of a traditional soap dish but with added safety measures. If an abnormal load is applied, like an attempted ligature, the bracket will release, causing the shelf to drop away and preventing any harmful incidents. To restore the shelf after the event, simply push it back into the corresponding brackets. The bracket features a heat-treated stainless steel spring clip that enables the product to release and reattach multiple times without compromising performance or safety. -
Hourglass Arm Table
- Radiolucent top.
- Height adjustable telescopic leg provides additional support.
- Requires two size 16 clamps for mounting.
- Requires pad, sold separately. Replacement pads can be found here: Hourglass Arm Table Pad.
-
Cardiac Head Pillow
This product has multiple variants. The options may be chosen on the product page- Memory foam top with comfort series vinyl.
-
Flush Pull Handle, Rectangle
Rectangular Flush Pull Handle, with a satin stainless steel finish and measuring 120mm x 40mm, is held in place with concealed screws. This recessed handle is available in a variety of shapes to fit your specific facility requirements, including round, square, and rectangular. -
Floor Mounted Door Closer
The Floor Mounted Double Action Door Closer can be used in conjunction with the double or single swing hinge. This door closer is a discrete solution that can be used in areas of high risk to minimise ligature points. This closer can be supplied with an optional mechanical hold back feature. When the door is opened to the required hold back point, it will latch in position and remain open until manually pulled, to disengage the hold back.This product has multiple variants. The options may be chosen on the product page -
Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -
Emergency Pull Handle
The Emergency Pull Handle is a vital accessory in any healthcare facility with anti-barricade doors. It provides additional grip to overcome any internal force generated by a patient holding the handle from the inside of the door, preventing clinical staff access. By sliding the Emergency Pull Handle over the pinch grip handle, the door can be opened outwardly by pulling it. The length of the handle is designed to allow multiple staff members to participate in pulling the door, ensuring swift entry to the barricaded room. The Emergency Pull Handle is compatible only with 729 handles. -
CLIK Load Release 500mm Straight Shelf
The CLIK Load Release 500mm Straight Shelf is a unique and practical solution for mental health facilities. It has been designed with safety in mind, as the brackets are designed to release when an abnormal load is applied, preventing any ligature attempts. The shelf is made of durable 8mm polycarbonate with chamfered edges and rounded corners, ensuring its safety and durability. After a ligature event, the shelf can be easily reattached by pushing it back into the corresponding brackets. The brackets incorporate heat-treated stainless steel spring clips that allow the product to release and reattach repeatedly without any decline in performance or safety. -
Grab Anti-Ligature Door Handles
The Grab Anti-Ligature Door Handles are designed for various applications and conform to DHF TS001 standards. The 731 handle offers an increased grip with excellent styling and reduced potential for injury due to its low projection and smooth line curvature. It's available in two back-plate options, a flat plate suitable for new or retrofit applications and a recessed dish for increased space behind the handle. Both options conform to DHF TS001 and are supplied with pin torx security fixings. Rest assured that this anti-ligature handle has been tested to Level A4 TS001 Grade for your safety and security.This product has multiple variants. The options may be chosen on the product page -
Prone Arm Support
- Fully radiolucent.
- Requires two pads, pads sold separately. Replacement pads can be found here: Prone Arm Support Pad.
-
Ophthalmic Head Section
This product has multiple variants. The options may be chosen on the product page- Provides clear access for seated surgeons.
- Attaches to table head section receptacles.
- Stainless steel and aluminium construction.
- Manufactured to suit most brand of operating tables.
- Requires pad, pad sold separately. Replacement pads can be found here: Ophthalmic Head Section Pad.
-
Recessed Anti-Ligature Pull Handle
The Recessed Anti-Ligature Pull Handle is a compact option from the Primera pull handle range, measuring only 90mm x 106mm and constructed from 3mm solid steel. The '726' handle is suitable for a variety of applications, from cupboards to doors in units with challenging behaviour, due to its lack of protrusions. It meets the requirements of TS001 at level 4 and is available in Satin Stainless Steel electro-plated finish as a standard product, with other finishes available upon request. The handle is also supplied with pin torx anti-tamper fixing screws for added security.
