“Form-A-Screen” has been added to your cart. View cart
You may be interested in…
-

Gel Supine Head Pad with Dish
This product has multiple variants. The options may be chosen on the product page- Self centering dish, conforms to the patient's head while offering support.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear
- Aides in Pressure Redistribution.
-



Adjustable, Over-Rail Type Lift Assisted Shoulder Chair
- Pneumatic-assisted linear motion
- Adjusts to fit any operating table
- Lateral brace included
- Articulation of 0-90 degrees
- Designed to suit A size operating table side rails.
-



Lithotomy Leg Holders
- Stainless steel construction.
- Requires two size 16 clamps for mounting.
- Requires pads and straps, sold separately.
- Replacement pads and straps can be found here: Lithotomy Leg Holder Pads.
- Disposable Lithotomy Straps are recommended for the safe positioning of the patient.
- Sold in pairs.
-



Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -



Round Bar Clamps
Operating theatre tables are fitted with side rails to which positioning equipment is attached. These rails range in size according to their make and origin. In order to achieve stable positioning, the correct sized clamp must be used.This product has multiple variants. The options may be chosen on the product page- Accepts up to size 16 round post.
- Stainless steel construction.
- Clamps to suit A side Surgical Table side rails are direct-on where slots are fitted in side rails.
-



Perineal Cutout Filler
This product has multiple variants. The options may be chosen on the product page- Fits over the perineal cutout to provide support when not in use.
- Designed to suit Skytron and Amsco/Steris operating tables.
-



Anaesthetic Screen Support
- Stainless steel construction.
- Requires one size 16 clamps for mounting.
- Requires pad which is sold separately. Replacement pads can be found here: Anaesthetic Screen Support Pad.
-



Surgical Arm Table
- Radiolucent top.
- Height adjustable telescopic leg provides additional support.
- Requires two size 16 clamp for mounting.
- Requires pad, pad sold separately. Replacement pads can be found here: Surgical Arm Table Pad.
-



-



Lightweight Leg Support
This product has multiple variants. The options may be chosen on the product page<ul><li>Designed to support the patients legs during transfer in and out of stirrups.</li><li>Manufactured to suit most tables, with options that slide over rails or insert into leg receptacles.</li><li>Weighs less than 5kg.</li><li>Includes replaceable vinyl cover. Replacement covers can be found here: <a href="https://staging.hipac.com.au/surgical-products/operating-theatre-tables-and-accessories/operating-table-accessories/replacement-pads/orthopaedic-lightweight-leg-support-pads-and-covers-2/">Lightweight Leg Support Pad</a>.</li><li>Custom Lightweight Leg Supports available. <a href="https://staging.hipac.com.au/contact-us/">Contact us</a> with your specific requirements.</li></ul> -



Lift Adjust Armboard
• Clips securely onto side rail of operating table. No clamps required for mounting. • Rotates 180 degrees from the table. • Requires pad, pad sold separately. Replacement pads can be found here: Lift Adjust Armboard Pad. Measurements: 660mm(L) x 150mm(W). -



Locking Armboard
This product has multiple variants. The options may be chosen on the product page- Hooks securely onto the side rail of the operating table. No clamps are required for mounting.
- Rotates 180 degrees from the table.
- Requires pad, pad sold separately. Replacement pads can be found here: Locking Armboard Pad. Measurements: 660mm(L) x 150mm(W).
-



Prone Arm Support
- Fully radiolucent.
- Requires two pads, pads sold separately. Replacement pads can be found here: Prone Arm Support Pad.
-



Anaesthetic Pillow
- Vinyl covered with chemically sealed seams.
-



Perineal Post
This product has multiple variants. The options may be chosen on the product page- To suit Sacral Rest for 777, Amsco/Steris or Ortho Trax.
- Can be manufactured to suit other table makes and models.
- Requires pad, pad sold separately. Replacement pads can be found here: Perineal Post Pad.
-



Wide Armboard
- Radiolucent top.
- Height adjustable.
- Requires two size 16 clamps for mounting.
- Requires pad, pad sold separately. Replacement pads can be found here: Wide Armboard Pad.
-



Gel Contoured Knee / Calf Positioner
- Contour 38mm deep.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Gel Flat Bottom Chest Rolls
This product has multiple variants. The options may be chosen on the product page- Used to protect the patients chest while in prone position.
- Also used for a variety of positioning needs including oblique and lateral stabilisation.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Tube Holder
- Impact resistant polycarbonate.
- Slotted to accept tubing.
- Slips under table mattress and is supported by patient's weight.
-



Hourglass Arm Table
- Radiolucent top.
- Height adjustable telescopic leg provides additional support.
- Requires two size 16 clamps for mounting.
- Requires pad, sold separately. Replacement pads can be found here: Hourglass Arm Table Pad.
-



Carter Braine Arm Support
- Stainless steel construction.
- Ball swivel joint allows for flexible positioning.
- Requires one size 16 clamp for mounting.
- Requires pad, pad sold separately. Replacement pads can be found here: Carter Braine Arm Support.
-



Singer Starr Stacker Lateral Support System
The Singer Starr Stacker is a surgical table accessory designed for procedures that require a patient to lie in the lateral or semi-lateral position. In these positions, the arms and legs are placed one over the other. The Singer Starr System is an efficient and safe alternative to the current practices and is used to support a patient's arms and legs during these procedures. Use armboard set in conjunction with Wide Armboard *Two different heights of bottom cushions come with each Arm Stacker Pad Set.This product has multiple variants. The options may be chosen on the product page -



Elevating Rotational Armboard
- One hand operated ball joint lock release.
- Limitless rotational capability.
- Ball joint of 38 degrees in any direction.
- Requires pad, pad sold separately. Replacement pads can be found here: Elevating Rotational Armboard Pad.
- Requires one size 17 radial clamp for mounting. We recommend using the Lock Lever, Radial, Direct On Clamp.
-



Gel Head Rest Prone/Supine
- Aids in positioning patients with respiration tubes in place.
- Unique design provides superior head control stability.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Prone Anaesthetic Pillow
- Designed to provide support for prone positioning, allowing for safe positioning of intubated patients.
- Twin layered foam with soft vinyl cover.
-



Lift Assisted Leg Holders / Stirrups
- 270kg patient weight capacity.
- Gas lift assisted stirrups.
- 120 degrees boot rotation.
- Handle controlled abduction and adduction.
- Pad set included. Replacement pads can be found here: Stirrup Replacement Pads.
- Requires two size 33 clamps for mounting. We recommend using the Stirrup Clamp.
-



Hook and Loop Adhesive Backed
This product has multiple variants. The options may be chosen on the product page- Adhesive backed Hook and Loop.
- Simply cut to length and apply to the surface via the adhesive backing.
-



3503 EZ Slide Operating Table
The 3503 EZ Slide has been specifically designed for surgical teams and is the most flexible, mid-range, general purpose theatre table used throughout Australian surgical facilities. Offering 530mm of top slide that is both convenient and easy to use, it allows for effortless movement of the patient through the imaging window at the touch of a button, facilitating imaging and surgical access. Additionally, this table features the highest height in our portfolio, standing tall at 1090mm, providing comfortable working access for a wide range of specialties. -



Lateral Brace
- Designed to be used in conjunction with the Skytron Shoulder Chair.
- Requires pad, pad sold separately. Replacement pads can be found here: Lateral Brace Pad
-



Carbon Fibre Imaging Extension
- Radiolucent Imaging Extension to suit Skytron 3500, 3600, 6300 and 6700 Series, and Hipac 5801 Operating Tables.
- Requires Pad, sold separately.
- Clamp On Rail and Carbon Fibre Arm Surgery Board also available for use with the Carbon Fibre Imaging Extension.
