May, 2023
Cart
You may be interested in…
-
Unaffected Leg Holder
- To suit Amsco/Steris and 777 Orthopaedic Traction Frames.
- Requires pad, pad sold separately. Replacement pads can be found here: Unaffected Leg Holder Pad.
-
Disposable Patient Care Kit to suit Jackson Table
A complete, single use patient care kit designed for use with the Jackson Table. Manufactured in Australia, they minimise the risk of cross contamination and avoid extensive cleaning.This product has multiple variants. The options may be chosen on the product page -
Disposable Body Support Roll
A single use, non-sterile body support roll manufactured in Australia from high quality foam. Avoiding the risk of cross contamination and the time and expense of cleaning maintenance, they are perfect for busy theatres and offer an economical alternative. Supplied in a carton of 12 singe use body support rolls, each roll is 450mm (Length) x 175mm (Diameter). -
Tubular Body Support
- Simple vertical and horizontal adjustment.
- Requires one Size 34 Clamp for mounting
- Requires pad. Pad sold separately. Replacement pads can be found here: Tubular Body Support Pads.
-
Popliteal Support
This product has multiple variants. The options may be chosen on the product page<ul><li>Standard supports are stainless steel. Radiolucent options are available.</li><li>Requires one clamp for mounting.</li><li>Requires pad, pad sold separately. Replacement pads can be found here: Popliteal Support Pad.</li></ul> -
Lithotomy Leg Holders
- Stainless steel construction.
- Requires two size 16 clamps for mounting.
- Requires pads and straps, sold separately.
- Replacement pads and straps can be found here: Lithotomy Leg Holder Pads.
- Disposable Lithotomy Straps are recommended for the safe positioning of the patient.
- Sold in pairs.
-
Replacement Lightweight Leg Support Covers
This product has multiple variants. The options may be chosen on the product page- Replacement covers to suit Lightweight Leg Supports.
- Custom covers are available. Contact us with your specific requirements.
-
Femoral / Popliteal Board
- Designed to suit Steris 3080/3085 operating tables as standard.
- Can be manufactured to suit most operating tables. Contact us with your specific requirements.
- Requires pad, pad sold separately. Replacement pads can be found here: Femoral/Popliteal Board Pad.
-
Lift Assisted Leg Holders / Stirrups
- 270kg patient weight capacity.
- Gas lift assisted stirrups.
- 120 degrees boot rotation.
- Handle controlled abduction and adduction.
- Pad set included. Replacement pads can be found here: Stirrup Replacement Pads.
- Requires two size 33 clamps for mounting. We recommend using the Stirrup Clamp.
-
Pelvic Tilt Seat Pad
This product has multiple variants. The options may be chosen on the product page- Replacement Pad to suit Pelvic Tilt Seat.
- Comfort Series.
-
Universal Stirrup Trolley
- Stainless Steel construction with a polymer base.
- Accepts most brands of lift assisted leg holders.
- Holds one pair of leg holders.
-
Disposable Operating Table Cover
A single-use, non-sterile operating table cover that is designed to fit most makes and models of operating theatre tables. It offers comprehensive protection from surgical fluids for the table and offers more efficient, hygienic clean-up after use. It fits under positioning and other surgical accessories so that it doesn’t hinder the functionality of the table, or any other surgical equipment being used. Manufactured in Australia, they are offered in a carton of 30 single-use operating table covers. -
Accessory Storage Trolley
- Designed to store table accessories in pre-configured locations.
- Positioning devices stored in base or attached via clamps.
- A size rails as standard. Can be manufactured to suit any rail size and storage requirements. Contact us with your specific requirements.
-
Locking/Lift Adjust and Carbon Fibre Armboard Pad
This product has multiple variants. The options may be chosen on the product page- Replacement Pad to suit Locking Armboard, Lift Adjust Armboard and Carbon Fibre Armboard
-
Lightweight Leg Support
This product has multiple variants. The options may be chosen on the product page<ul><li>Designed to support the patients legs during transfer in and out of stirrups.</li><li>Manufactured to suit most tables, with options that slide over rails or insert into leg receptacles.</li><li>Weighs less than 5kg.</li><li>Includes replaceable vinyl cover. Replacement covers can be found here: <a href="https://staging.hipac.com.au/surgical-products/operating-theatre-tables-and-accessories/operating-table-accessories/replacement-pads/orthopaedic-lightweight-leg-support-pads-and-covers-2/">Lightweight Leg Support Pad</a>.</li><li>Custom Lightweight Leg Supports available. <a href="https://staging.hipac.com.au/contact-us/">Contact us</a> with your specific requirements.</li></ul> -
Heavy Duty Lift Assisted Leg Holders / Stirrups
- 360kg patient weight capacity.
- Gas lift assisted stirrups.
- 120 degree boot rotation.
- Handle controlled abduction and adduction.
- Pad set included. Replacement pads can be found here: Stirrup Replacement Pads.
- Requires two size 33 clamps for mounting. We recommend using the Stirrup Clamp.
-
Disposable Popliteal/Tubular Pad
A single use, non-sterile pad that minimises any risk of cross contamination and the expense of cleaning, providing easier maintained, efficient workflows for busy theatres. Suitable for most popliteal and tubular supports, they are manufactured right here in Australia. Offered in a pack of 12 pads at 275mm (Length) x 140mm (Diameter), we can offer custom options on this product. As with all our disposable products, we can provide custom solutions to suit any need, please talk to us for further information. -
Tubular Support Pads
- Replacement pad made to suit Tubular Body Support and Tubular Support.
- Seamlessvinyl-covered foam.
-
Disposable Heel Cup
An effective patient positioner that minimises the risk of cross contamination and avoids the expense and time of cleaning, the Hipac single use heel cup is non-sterile and perfect for high traffic environments. Made in Australia, they should be used with a standard reusable table or positioning pads and are offered in cartons of 24 pairs of single use heel cups. As with all our disposable products, we can provide custom solutions to suit any need, please talk to us for further information. -
Table Width Extension Pads
This product has multiple variants. The options may be chosen on the product page- Replacement Pads to suit Direct-On Table Width Extension.
- Pads sold individually.
