May, 2023
Cart
You may be interested in…
-
Foam Laminectomy Rest
<ul><li>Vinyl covered foam positioning device.</li><li>Contoured support, shaped to assist in prone patient positioning.</li><li>All seams chemically sealed.</li></ul> -
Adjustable Mayfield Adaptor
- Adaptor to attach Mayfield head frame to operating table.
- Slides over side rails.
- Locks securely in place with wrist screws.
-
Recessed Anti-Ligature Pull Handle
The Recessed Anti-Ligature Pull Handle is a compact option from the Primera pull handle range, measuring only 90mm x 106mm and constructed from 3mm solid steel. The '726' handle is suitable for a variety of applications, from cupboards to doors in units with challenging behaviour, due to its lack of protrusions. It meets the requirements of TS001 at level 4 and is available in Satin Stainless Steel electro-plated finish as a standard product, with other finishes available upon request. The handle is also supplied with pin torx anti-tamper fixing screws for added security. -
Femoral / Popliteal Board
- Designed to suit Steris 3080/3085 operating tables as standard.
- Can be manufactured to suit most operating tables. Contact us with your specific requirements.
- Requires pad, pad sold separately. Replacement pads can be found here: Femoral/Popliteal Board Pad.
-
Tubular Body Support
- Simple vertical and horizontal adjustment.
- Requires one Size 34 Clamp for mounting
- Requires pad. Pad sold separately. Replacement pads can be found here: Tubular Body Support Pads.
-
Elephants Trunk Pull Handle
The Elephants Trunk Pull Handle is a robust and solid cast product designed for applications where manual dexterity is a primary concern. Its sleek design provides a stylish alternative to the commonly known 'Witches Nose' handle. This handle comes in two back-plate options, the first being a flat plate for either new doors or retrofit applications, while the second is mounted on a recessed dish, providing more available space behind the handle but requiring more detailed door preparation prior to installation. Although not DHF TS001 compliant, it's suitable for applications where there is less challenging behaviour or installed with back-to-back bolt-through fixings. Its dimensions are 205mm x 90mm x 3mm, and it's tested to Level B4 TS001 Grade for anti-ligature purposes.This product has multiple variants. The options may be chosen on the product page -
Flush Pull Handle, Rectangle
Rectangular Flush Pull Handle, with a satin stainless steel finish and measuring 120mm x 40mm, is held in place with concealed screws. This recessed handle is available in a variety of shapes to fit your specific facility requirements, including round, square, and rectangular. -
Flush Pull Handle, Square
Square Flush Pull Handle measures 50mm on each side, providing a recessed design with a satin stainless steel finish that gives a sleek appearance. The handle is held in place with concealed screws for a clean and professional look. Choose from different shapes to fit your facility's requirements: Round, or Rectangle. -
Gel Pad to suit Wilson Frame
- Sold individually.
- Latex & Silicone Free.
- Anti-Bacterial & Anti-Microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aids in Pressure Redistribution.
-
Orthopaedic Popliteal Support
This product has multiple variants. The options may be chosen on the product page- To suit Amsco/Steris and 777 or Ortho Trax Orthopaedic Traction Frames.
- Size 35 post.
- Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Popliteal Support Pad.
-
Emergency Pull Handle
The Emergency Pull Handle is a vital accessory in any healthcare facility with anti-barricade doors. It provides additional grip to overcome any internal force generated by a patient holding the handle from the inside of the door, preventing clinical staff access. By sliding the Emergency Pull Handle over the pinch grip handle, the door can be opened outwardly by pulling it. The length of the handle is designed to allow multiple staff members to participate in pulling the door, ensuring swift entry to the barricaded room. The Emergency Pull Handle is compatible only with 729 handles. -
Mayfield Adaptor
- Adaptor to attach Mayfield Head Frame to 3500, 3600, 6700 and 5801 Series Operating Tables.
- Slides into head or leg receptacles.
- Can be manufactured to suit most makes/models of operating tables. Contact us with your specific requirements.
-
Locking/Lift Adjust and Carbon Fibre Armboard Pad
This product has multiple variants. The options may be chosen on the product page- Replacement Pad to suit Locking Armboard, Lift Adjust Armboard and Carbon Fibre Armboard
-
Contour Anti-Ligature 90 Degree Grab Rail, 700mm x 900mm
The Contour Anti-Ligature Grab Rail is designed to be free of ligature points whether installed vertically or horizontally. It features a sloping cap on one end to prevent anything from being looped completely around the rail. The open end of the rail allows for easy drainage, which eliminates hygiene and infection control issues typically associated with traditional infilled rails. This grab rail is 700mm x 900mm in size.This product has multiple variants. The options may be chosen on the product page -
Replacement Lightweight Leg Support Covers
This product has multiple variants. The options may be chosen on the product page- Replacement covers to suit Lightweight Leg Supports.
- Custom covers are available. Contact us with your specific requirements.
-
Gillespie Pillow
- Vinyl-covered foam positioning device.
- Contoured support, shaped to assist in prone patient positioning.
- All seams are chemically sealed.
-
Disposable Body Support Roll
A single use, non-sterile body support roll manufactured in Australia from high quality foam. Avoiding the risk of cross contamination and the time and expense of cleaning maintenance, they are perfect for busy theatres and offer an economical alternative. Supplied in a carton of 12 singe use body support rolls, each roll is 450mm (Length) x 175mm (Diameter). -
Tubular Support Pads
- Replacement pad made to suit Tubular Body Support and Tubular Support.
- Seamlessvinyl-covered foam.
-
Orthopaedic Lightweight Leg Support
- Radiolucent carbon fibre construction.
- Designed to suit Amsco / Steris 777 orthopaedic traction frames.
- Requires pad, pad sold separately. Replacement pad can be found here: Orthopaedic Lightweight Leg Support Pads.
- Includes Cover. Replacement Covers can be found here: Orthopaedic Lightweight Leg Support Cover
