“Orthopaedic Traction Frame” has been added to your cart. View cart
You may be interested in…
-

Orthopaedic Sacral Rest
This product has multiple variants. The options may be chosen on the product page- Designed to suit Amsco/Steris and 777 orthopaedic traction frames.
- Radiolucent carbon fibre construction.
- Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Sacral Rest Pad.
-



Orthopaedic Popliteal Support
This product has multiple variants. The options may be chosen on the product page- To suit Amsco/Steris and 777 or Ortho Trax Orthopaedic Traction Frames.
- Size 35 post.
- Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Popliteal Support Pad.
-



Gel Pad to suit Wilson Frame
- Sold individually.
- Latex & Silicone Free.
- Anti-Bacterial & Anti-Microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aids in Pressure Redistribution.
-



Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -



Gillespie Pillow
- Vinyl-covered foam positioning device.
- Contoured support, shaped to assist in prone patient positioning.
- All seams are chemically sealed.
-



Tube Holder
- Impact resistant polycarbonate.
- Slotted to accept tubing.
- Slips under table mattress and is supported by patient's weight.
-



Orthopaedic Lightweight Leg Support
- Radiolucent carbon fibre construction.
- Designed to suit Amsco / Steris 777 orthopaedic traction frames.
- Requires pad, pad sold separately. Replacement pad can be found here: Orthopaedic Lightweight Leg Support Pads.
- Includes Cover. Replacement Covers can be found here: Orthopaedic Lightweight Leg Support Cover
-



Replacement Pad with Gel Insert to suit Wilson Frame
- Layered foam base structure with an integrated gel layer.
- Fully enclosed with a combination of Standard and Comfort Series vinyl.
- All seams are chemically sealed.
- Sold in pairs.
-



Round Bar Clamps
Operating theatre tables are fitted with side rails to which positioning equipment is attached. These rails range in size according to their make and origin. In order to achieve stable positioning, the correct sized clamp must be used.This product has multiple variants. The options may be chosen on the product page- Accepts up to size 16 round post.
- Stainless steel construction.
- Clamps to suit A side Surgical Table side rails are direct-on where slots are fitted in side rails.
-



31.5″ 4K OLED UHD Medical Display
Featuring OLED technology, this monitor delivers true blacks, better contrast, power efficiency, and a lightweight design. Compatible with specialised visualisation equipment perfect for use in operating rooms and surgical suites. Designed to be easy to use with complete control over image characteristics and multi-window layouts. -



Foam Laminectomy Rest
<ul><li>Vinyl covered foam positioning device.</li><li>Contoured support, shaped to assist in prone patient positioning.</li><li>All seams chemically sealed.</li></ul> -



Hipac Orthopaedic Traction Boots
This product has multiple variants. The options may be chosen on the product page- Vinyl boots with hook and loop fastenings.
- Four straps for increased traction.
- Easy to clean vinyl construction.
- Sold in pairs.
- Can be manufactured to suit other traction frames.
-



HD Wireless Transmitter and Receiver
A common issue faced by theatre staff is that digital displays have too many cross-room cables which often creates limited flexible equipment layouts. The wireless transmitter and receiver enables video carts to be completely mobile. Fewer cords on the floor can also eliminate tripping hazards. This device also eliminates the need to connect and disconnect cables, ultimately increasing the speed and efficiency of the turn-around time in the operating theatre. KEY FEATURES- HD Video transmission without compression.
- No lag or stall.
- Encrypted signal.
- Units can mount to the top or sides of a display monitor.
-



Orthopaedic Hip Rest
• Designed to suit Amsco/Steris and 777 orthopaedic traction frames. • Radiolucent carbon fibre construction. • Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Hip Rest -



Adjustable Mayfield Adaptor
- Adaptor to attach Mayfield head frame to operating table.
- Slides over side rails.
- Locks securely in place with wrist screws.
-



Two Piece Laminectomy Rest
- Vinyl covered positioning device.
- Contoured support, shaped to assist in prone patient positioning.
- Vinyl covered foam.
- All seams chemically sealed.
-



Prone Anaesthetic Pillow
- Designed to provide support for prone positioning, allowing for safe positioning of intubated patients.
- Twin layered foam with soft vinyl cover.
-



Anaesthetic Screen Support
- Stainless steel construction.
- Requires one size 16 clamps for mounting.
- Requires pad which is sold separately. Replacement pads can be found here: Anaesthetic Screen Support Pad.
-



Anaesthetic Pillow
- Vinyl covered with chemically sealed seams.
-



Disposable Popliteal/Tubular Pad
A single use, non-sterile pad that minimises any risk of cross contamination and the expense of cleaning, providing easier maintained, efficient workflows for busy theatres. Suitable for most popliteal and tubular supports, they are manufactured right here in Australia. Offered in a pack of 12 pads at 275mm (Length) x 140mm (Diameter), we can offer custom options on this product. As with all our disposable products, we can provide custom solutions to suit any need, please talk to us for further information.
