May, 2023
Cart
You may be interested in…
-
Gel Donut Head Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Gel Lithotomy Legholder Stirrup Pad
This product has multiple variants. The options may be chosen on the product page- For use with Lithotomy Leg Holders.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Orthopaedic Hip Rest
• Designed to suit Amsco/Steris and 777 orthopaedic traction frames. • Radiolucent carbon fibre construction. • Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Hip Rest -
Narrow Rotatable Lateral Support Pad
- Replacement pad made to suit Narrow Rotatable Lateral Support.
- Vinyl-covered foam pad.
- Latex-free.
-
Emergency Pull Handle
The Emergency Pull Handle is a vital accessory in any healthcare facility with anti-barricade doors. It provides additional grip to overcome any internal force generated by a patient holding the handle from the inside of the door, preventing clinical staff access. By sliding the Emergency Pull Handle over the pinch grip handle, the door can be opened outwardly by pulling it. The length of the handle is designed to allow multiple staff members to participate in pulling the door, ensuring swift entry to the barricaded room. The Emergency Pull Handle is compatible only with 729 handles. -
Unaffected Leg Holder
- To suit Amsco/Steris and 777 Orthopaedic Traction Frames.
- Requires pad, pad sold separately. Replacement pads can be found here: Unaffected Leg Holder Pad.
-
Recessed Anti-Ligature Pull Handle
The Recessed Anti-Ligature Pull Handle is a compact option from the Primera pull handle range, measuring only 90mm x 106mm and constructed from 3mm solid steel. The '726' handle is suitable for a variety of applications, from cupboards to doors in units with challenging behaviour, due to its lack of protrusions. It meets the requirements of TS001 at level 4 and is available in Satin Stainless Steel electro-plated finish as a standard product, with other finishes available upon request. The handle is also supplied with pin torx anti-tamper fixing screws for added security. -
Round Lateral Support Pad
- Replacement Pad made to suit Round Lateral Support.
- Seamless Pad.
-
Vertical Support Pad
- Pad to suit Vertical Support and Popliteal Support.
- Seamless vinyl-covered foam.
-
Gel Contoured Knee / Calf Positioner
- Contour 38mm deep.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Tubular Support
- Simple vertical and horizontal adjustment.
- Requires one clamp, size 34.
- Requires pad. Pad sold separately. Replacement Pads can be found here: Tubular Support Pad.
-
Vertical Support
- Adjusts vertically.
- Requires one Size 16 clamp for mounting.
- Requires pad. Pad sold separately. Replacement Pads can be found here: Vertical Support Pad
-
Tubular Body Support
- Simple vertical and horizontal adjustment.
- Requires one Size 34 Clamp for mounting
- Requires pad. Pad sold separately. Replacement pads can be found here: Tubular Body Support Pads.
-
Gel Clam Shell Heel Protector
- Wraps around the patient's foot to protect the heel.
- Hook and Loop Closure.
- Easy to use and clean.
- Latex & Silicone Free
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Orthopaedic Lightweight Leg Support
- Radiolucent carbon fibre construction.
- Designed to suit Amsco / Steris 777 orthopaedic traction frames.
- Requires pad, pad sold separately. Replacement pad can be found here: Orthopaedic Lightweight Leg Support Pads.
- Includes Cover. Replacement Covers can be found here: Orthopaedic Lightweight Leg Support Cover
-
Elephants Trunk Pull Handle
The Elephants Trunk Pull Handle is a robust and solid cast product designed for applications where manual dexterity is a primary concern. Its sleek design provides a stylish alternative to the commonly known 'Witches Nose' handle. This handle comes in two back-plate options, the first being a flat plate for either new doors or retrofit applications, while the second is mounted on a recessed dish, providing more available space behind the handle but requiring more detailed door preparation prior to installation. Although not DHF TS001 compliant, it's suitable for applications where there is less challenging behaviour or installed with back-to-back bolt-through fixings. Its dimensions are 205mm x 90mm x 3mm, and it's tested to Level B4 TS001 Grade for anti-ligature purposes.This product has multiple variants. The options may be chosen on the product page -
Flush Pull Handle, Square
Square Flush Pull Handle measures 50mm on each side, providing a recessed design with a satin stainless steel finish that gives a sleek appearance. The handle is held in place with concealed screws for a clean and professional look. Choose from different shapes to fit your facility's requirements: Round, or Rectangle. -
Gel Elbow Pad
- Positions and cradles the elbow to relieve pressure.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Orthopaedic Popliteal Support
This product has multiple variants. The options may be chosen on the product page- To suit Amsco/Steris and 777 or Ortho Trax Orthopaedic Traction Frames.
- Size 35 post.
- Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Popliteal Support Pad.
-
Gel Horseshoe Head Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Orthopaedic Sacral Rest
This product has multiple variants. The options may be chosen on the product page- Designed to suit Amsco/Steris and 777 orthopaedic traction frames.
- Radiolucent carbon fibre construction.
- Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Sacral Rest Pad.
-
Flush Pull Handle, Rectangle
Rectangular Flush Pull Handle, with a satin stainless steel finish and measuring 120mm x 40mm, is held in place with concealed screws. This recessed handle is available in a variety of shapes to fit your specific facility requirements, including round, square, and rectangular. -
Orthopaedic Traction Frame
By working alongside healthcare professionals, the Hipac Orthopaedic Traction Frame was created specifically with Australian hospitals in mind. This unit is uniquely designed with full patient positioning capabilities to streamline lower extremity and hip procedures. The lightweight carbon fibre and aluminium construction ensures the weight of the frame is kept to a minimum and almost shadow-free enhanced imaging capabilities are provided through the unique shape of its carbon fibre leg spars. Key Features:- Carbon fibre leg spars for easy imaging.
- Storage trolley allows for easy transportation, component tracking and storage.
- Traction spars can be put on any angle.
- Leg stabilisers remove excess table movement.
- Easy adjustment according to patient size and positioning requirements.
-
Contour Anti-Ligature 90 Degree Grab Rail, 700mm x 900mm
The Contour Anti-Ligature Grab Rail is designed to be free of ligature points whether installed vertically or horizontally. It features a sloping cap on one end to prevent anything from being looped completely around the rail. The open end of the rail allows for easy drainage, which eliminates hygiene and infection control issues typically associated with traditional infilled rails. This grab rail is 700mm x 900mm in size.This product has multiple variants. The options may be chosen on the product page
