May, 2023
Cart
You may be interested in…
-
Patient Support Wedges
This product has multiple variants. The options may be chosen on the product page- Vinyl covered foam.
- All seams chemically sealed.
- Custom options available, including size, colour, density, etc. Contact us for more information.
-
Flush Pull Handle, Square
Square Flush Pull Handle measures 50mm on each side, providing a recessed design with a satin stainless steel finish that gives a sleek appearance. The handle is held in place with concealed screws for a clean and professional look. Choose from different shapes to fit your facility's requirements: Round, or Rectangle. -
Multi Drawer Trolley
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 900mm(L) x 490mm(W) x 900mm(H). Drawer Measurements: 4x 100mm(D), 2x 150mm(D). Shelf: 50kg weight capacity. Castors: 2x 125mm Non-Locking Castors on back. 2x 125mm Locking Castors on front. -
Gel Concave Armboard Pad
This product has multiple variants. The options may be chosen on the product page- Contoured for multi direction support.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Surgical Arm Table
- Radiolucent top.
- Height adjustable telescopic leg provides additional support.
- Requires two size 16 clamp for mounting.
- Requires pad, pad sold separately. Replacement pads can be found here: Surgical Arm Table Pad.
-
Form-A-Screen
- Flexible anaesthetic screen, shapes into any configuration.
- Requires two size 16 clamps for mounting.
-
Gel Clam Shell Heel Protector
- Wraps around the patient's foot to protect the heel.
- Hook and Loop Closure.
- Easy to use and clean.
- Latex & Silicone Free
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Round Lateral Support Pad
- Replacement Pad made to suit Round Lateral Support.
- Seamless Pad.
-
Gel Elbow Pad
- Positions and cradles the elbow to relieve pressure.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Prone Anaesthetic Pillow
- Designed to provide support for prone positioning, allowing for safe positioning of intubated patients.
- Twin layered foam with soft vinyl cover.
-
Flush Pull Handle, Round
The Flush Pull Handle in a 40mm round shape, is designed to be recessed for a sleek finish. Made of high-quality satin stainless steel with concealed screws, this handle is both durable and visually appealing. Choose from various shapes including the square and rectangle to fit the specific requirements of your facility. -
Gel Flat Bottom Chest Rolls
This product has multiple variants. The options may be chosen on the product page- Used to protect the patients chest while in prone position.
- Also used for a variety of positioning needs including oblique and lateral stabilisation.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Anaesthetic Trolley – Classic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 600mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 1x 250mm(D), 3x 125mm(D) Shelf: 50kg weight capacity Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Nestable Table (Large)
Australian Made 304 Grade Stainless Steel Table with four precision ball bearing castors. Designed to fit over our Small and Medium Nestable Tables for a compact and modular storage solution in the Nestable Tables Set. Measurements: 1000mm(L) x 600mm(W) x 900mm(H). Shelf: 50kg weight capacity -
Vinyl Sandbags
This product has multiple variants. The options may be chosen on the product page- Provides stable patient positioning.
- Covered in black vinyl.
- Available with or without an eyelet for use while applying traction.
- Available with custom labelling.
-
Vertical Support
- Adjusts vertically.
- Requires one Size 16 clamp for mounting.
- Requires pad. Pad sold separately. Replacement Pads can be found here: Vertical Support Pad
-
Nestable Table (Small)
Australian Made 304 Grade Stainless Steel Table with four precision ball bearing castors. Designed to fit under Large and Medium Nestable Tables for a compact and modular storage solution in the Nestable Tables Set. Measurements: 760mm(L) x 500mm(W) x 830mm(H). Shelf: 50kg weight capacity. -
Four Drawer Instrument Trolley
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Size Options: 490mm(L) x 490mm(W) x 900mm(H) 600mm(L) x 490mm(W) x 900mm(H) 750mm(L) x 490mm(W) x 900mm(H) 900mm(L) x 490mm(W) x 900mm(H) Castors: 2x125mm Non-Locking Castors on back 2x125mm Locking Castors on front Drawer Dimensions: 4 x 125mm(D). Shelves: 50kg weight capacity per shelf. Available Accessories: Drawer dividers Drawer linersThis product has multiple variants. The options may be chosen on the product page -
Disposable Stacked Head Ring
Designed for use with standard reusable tables or positioning pads, the Hipac single use, non-sterile stacked head rings are manufactured in Australia from high quality foam materials. As single use items, they minimise the risk of cross contamination and avoid the time and expense of cleaning for rapid turnaround of equipment. Supplied in a carton of 12 single use attacked head rings, they are ideal for any medical facility. -
Tubular Support
- Simple vertical and horizontal adjustment.
- Requires one clamp, size 34.
- Requires pad. Pad sold separately. Replacement Pads can be found here: Tubular Support Pad.
-
Tubular Body Support
- Simple vertical and horizontal adjustment.
- Requires one Size 34 Clamp for mounting
- Requires pad. Pad sold separately. Replacement pads can be found here: Tubular Body Support Pads.
-
Hourglass Arm Table
- Radiolucent top.
- Height adjustable telescopic leg provides additional support.
- Requires two size 16 clamps for mounting.
- Requires pad, sold separately. Replacement pads can be found here: Hourglass Arm Table Pad.
-
31.5″ 4K OLED UHD Medical Display
Featuring OLED technology, this monitor delivers true blacks, better contrast, power efficiency, and a lightweight design. Compatible with specialised visualisation equipment perfect for use in operating rooms and surgical suites. Designed to be easy to use with complete control over image characteristics and multi-window layouts. -
Orthopaedic Lightweight Leg Support
- Radiolucent carbon fibre construction.
- Designed to suit Amsco / Steris 777 orthopaedic traction frames.
- Requires pad, pad sold separately. Replacement pad can be found here: Orthopaedic Lightweight Leg Support Pads.
- Includes Cover. Replacement Covers can be found here: Orthopaedic Lightweight Leg Support Cover
-
Vertical Support Pad
- Pad to suit Vertical Support and Popliteal Support.
- Seamless vinyl-covered foam.
-
Anaesthetic Pillow
- Vinyl covered with chemically sealed seams.
-
HD Wireless Transmitter and Receiver
A common issue faced by theatre staff is that digital displays have too many cross-room cables which often creates limited flexible equipment layouts. The wireless transmitter and receiver enables video carts to be completely mobile. Fewer cords on the floor can also eliminate tripping hazards. This device also eliminates the need to connect and disconnect cables, ultimately increasing the speed and efficiency of the turn-around time in the operating theatre. KEY FEATURES- HD Video transmission without compression.
- No lag or stall.
- Encrypted signal.
- Units can mount to the top or sides of a display monitor.
-
Gel Sandbags
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution
-
Jaw Elevation Device (JED)
- Maintains an open airway in sedated or anesthetised patients without the need for airway instrumentation.
- Frees medical personnel from the need to hold the jaw manually in sedated or obtunded patients.
- When left in place after a procedure, reduces post-operative airway complications.
- Non-invasive and easy to apply.
- Provides reusable head support, eliminating the need for blankets, towels or donuts.
-
Unaffected Leg Holder
- To suit Amsco/Steris and 777 Orthopaedic Traction Frames.
- Requires pad, pad sold separately. Replacement pads can be found here: Unaffected Leg Holder Pad.
-
Gel Oval Ulnar/Brachial Protector
- Protects elbow and is secured with hook and loop.
- Allows full view of arm.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Nestable Table (Medium)
Australian Made 304 Grade Stainless Steel Table with four precision ball bearing castors. Designed to fit between our Large and Small Nestable Tables for a compact and modular storage solution in the Nestable Tables Set. Measurements: 940mm(L) x 510mm(W) x 870mm(H) Shelf: 50kg weight capacity. -
Hook and Loop Restraint Straps
This product has multiple variants. The options may be chosen on the product page- Two-piece straps with stainless steel side rail mounts.
- Slides over table rails.
-
Elephants Trunk Pull Handle
The Elephants Trunk Pull Handle is a robust and solid cast product designed for applications where manual dexterity is a primary concern. Its sleek design provides a stylish alternative to the commonly known 'Witches Nose' handle. This handle comes in two back-plate options, the first being a flat plate for either new doors or retrofit applications, while the second is mounted on a recessed dish, providing more available space behind the handle but requiring more detailed door preparation prior to installation. Although not DHF TS001 compliant, it's suitable for applications where there is less challenging behaviour or installed with back-to-back bolt-through fixings. Its dimensions are 205mm x 90mm x 3mm, and it's tested to Level B4 TS001 Grade for anti-ligature purposes.This product has multiple variants. The options may be chosen on the product page -
Orthopaedic Popliteal Support
This product has multiple variants. The options may be chosen on the product page- To suit Amsco/Steris and 777 or Ortho Trax Orthopaedic Traction Frames.
- Size 35 post.
- Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Popliteal Support Pad.
-
Lithotomy Table
- Australian Made 304 Grade Stainless Steel Lithotomy Table.
- Adjustable Height: 740 - 1140mm.
- Castors: 4x 75mm Locking Castors.
-
Resuscitation Trolley – Combo
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 4x 125mm(D) Half Drawers, 1x 125mm(D) Full Width Drawer Shelves: 50kg weight capacity per shelf Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Resuscitation Trolley – Basic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 2x 125mm(D) Half Drawers Shelves: 50kg weight capacity per shelf Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Patient Support Maternity Wedge
- Vinyl covered foam, all seams chemically sealed.
- Custom options available, including size, colour, density, etc. Contact us with your specific requirements.
-
Gel Prone Headrest with Interchangeable Base
- Including three different heights to provide more customised positioning.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Narrow Rotatable Lateral Support Pad
- Replacement pad made to suit Narrow Rotatable Lateral Support.
- Vinyl-covered foam pad.
- Latex-free.
-
Pinch Grip Anti-Ligature Handles
The Primera '729' Pinch Grip anti-ligature handle is a well-known design icon in the mental healthcare industry. Its stylish and sleek lines are popular among interior designers who aim to create welcoming environments. This design has been a staple in the Primera range since its beginning and is suitable for applications where manual dexterity is not a major consideration, such as elderly or infirm patients. The '729' has been purpose-designed and DHF TS001 tested, achieving the highest level (Grade 4) like all Primera products. The back plates are made from 3mm electro-plated steel, available in either radius or square format, with pin torx anti-tamper fixings included. Bolt-through fixings are also available for an additional fee.This product has multiple variants. The options may be chosen on the product page -
Orthopaedic Sacral Rest
This product has multiple variants. The options may be chosen on the product page- Designed to suit Amsco/Steris and 777 orthopaedic traction frames.
- Radiolucent carbon fibre construction.
- Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Sacral Rest Pad.
-
Orthopaedic Hip Rest
• Designed to suit Amsco/Steris and 777 orthopaedic traction frames. • Radiolucent carbon fibre construction. • Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Hip Rest -
Orthopaedic Traction Frame
By working alongside healthcare professionals, the Hipac Orthopaedic Traction Frame was created specifically with Australian hospitals in mind. This unit is uniquely designed with full patient positioning capabilities to streamline lower extremity and hip procedures. The lightweight carbon fibre and aluminium construction ensures the weight of the frame is kept to a minimum and almost shadow-free enhanced imaging capabilities are provided through the unique shape of its carbon fibre leg spars. Key Features:- Carbon fibre leg spars for easy imaging.
- Storage trolley allows for easy transportation, component tracking and storage.
- Traction spars can be put on any angle.
- Leg stabilisers remove excess table movement.
- Easy adjustment according to patient size and positioning requirements.
-
Disposable Operating Table Cover
A single-use, non-sterile operating table cover that is designed to fit most makes and models of operating theatre tables. It offers comprehensive protection from surgical fluids for the table and offers more efficient, hygienic clean-up after use. It fits under positioning and other surgical accessories so that it doesn’t hinder the functionality of the table, or any other surgical equipment being used. Manufactured in Australia, they are offered in a carton of 30 single-use operating table covers. -
Anaesthetic Trolley – Deluxe
Australian Made 304 Grade Stainless Steel Trolley with two side shelves, key lock, soft closing drawers, side and back rails and four precision ball bearing castors. Trolley Measurements: 900mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 2x 75mm(D), 2x 100mm(D), 2x 150mm(D) x 600mm(W). Shelves: 50kg weight capacity per shelf Castors: 2 x 125mm Non-Locking Castors 2 x 125mm Locking Castors -
Recessed Anti-Ligature Pull Handle
The Recessed Anti-Ligature Pull Handle is a compact option from the Primera pull handle range, measuring only 90mm x 106mm and constructed from 3mm solid steel. The '726' handle is suitable for a variety of applications, from cupboards to doors in units with challenging behaviour, due to its lack of protrusions. It meets the requirements of TS001 at level 4 and is available in Satin Stainless Steel electro-plated finish as a standard product, with other finishes available upon request. The handle is also supplied with pin torx anti-tamper fixing screws for added security. -
Disposable Face Rest Covers to suit Epidural Positioning Device
Our Sani-Cover Medical Grade Disposable Face Rest Covers are designed for use with our Epidural Positioning Device (EPD) or for any crescent-shaped face rest cushion. The 25 gsm, spunbound fabric provides a comfortable, sanitary barrier for the face during care and treatment. Latex-free elastic ensures the cover remains in place but allows for quick and easy changeover between patients. The Face Rest Covers also fit the Epidural Positioning Device (EPD) arm rest. Sold in packs of 50. -
Resuscitation Trolley – Deluxe
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 6x 125mm(D) Half Drawers, 1x 250mm(D) Full Width Drawer Shelf: 50kg weight capacity Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Disposable Wedges
A single use, non-sterile wedge manufactured in Australia. With a range of sizes, these wedges minimise the risk of cross contamination and with no cleaning needed, are perfect for busy theatres. Offered in a pack of 12 wedges, they must be used in conjunction with a standard reusable table or positioning pads, and are ideal for fast, secure positioning.This product has multiple variants. The options may be chosen on the product page -
Disposable Heel Cup
An effective patient positioner that minimises the risk of cross contamination and avoids the expense and time of cleaning, the Hipac single use heel cup is non-sterile and perfect for high traffic environments. Made in Australia, they should be used with a standard reusable table or positioning pads and are offered in cartons of 24 pairs of single use heel cups. As with all our disposable products, we can provide custom solutions to suit any need, please talk to us for further information. -
Emergency Pull Handle
The Emergency Pull Handle is a vital accessory in any healthcare facility with anti-barricade doors. It provides additional grip to overcome any internal force generated by a patient holding the handle from the inside of the door, preventing clinical staff access. By sliding the Emergency Pull Handle over the pinch grip handle, the door can be opened outwardly by pulling it. The length of the handle is designed to allow multiple staff members to participate in pulling the door, ensuring swift entry to the barricaded room. The Emergency Pull Handle is compatible only with 729 handles. -
Universal Bar Clamps
Operating theatre tables are fitted with side rails to which positioning equipment is attached. These rails range in size according to their make and origin. In order to achieve stable positioning, the correct sized clamp must be used.This product has multiple variants. The options may be chosen on the product page- Accepts most brands of gas assisted stirrups.
- Accepts up to size 17 round post.
- Accepts size 33 and 34 rectangular bar.
- Lightweight aluminium construction.
- Clamps to suit A size rails are direct-on where slots are fitted in side rail.
