May, 2023
Cart
You may be interested in…
-
Jaw Elevation Device (JED)
- Maintains an open airway in sedated or anesthetised patients without the need for airway instrumentation.
- Frees medical personnel from the need to hold the jaw manually in sedated or obtunded patients.
- When left in place after a procedure, reduces post-operative airway complications.
- Non-invasive and easy to apply.
- Provides reusable head support, eliminating the need for blankets, towels or donuts.
-
Curved Lateral Support Pad
- Replacement pad made to suit Curved Lateral Support, Curved Support and Curved Support Non-Rotating.
- Vinyl-covered foam.
-
Elephants Trunk Pull Handle
The Elephants Trunk Pull Handle is a robust and solid cast product designed for applications where manual dexterity is a primary concern. Its sleek design provides a stylish alternative to the commonly known 'Witches Nose' handle. This handle comes in two back-plate options, the first being a flat plate for either new doors or retrofit applications, while the second is mounted on a recessed dish, providing more available space behind the handle but requiring more detailed door preparation prior to installation. Although not DHF TS001 compliant, it's suitable for applications where there is less challenging behaviour or installed with back-to-back bolt-through fixings. Its dimensions are 205mm x 90mm x 3mm, and it's tested to Level B4 TS001 Grade for anti-ligature purposes.This product has multiple variants. The options may be chosen on the product page -
Wide Lateral Support Pads
This product has multiple variants. The options may be chosen on the product page- Made to suit Wide Lateral Support.
- Two pad types available: flat or curved.
- Seamless vinyl-covered foam.
-
Straight Lateral Support Pads
This product has multiple variants. The options may be chosen on the product page- Replacement pad made to suit Straight Lateral Support and Straight Lateral Support, Short Plate.
- Vinyl-covered foam.
-
Flush Pull Handle, Rectangle
Rectangular Flush Pull Handle, with a satin stainless steel finish and measuring 120mm x 40mm, is held in place with concealed screws. This recessed handle is available in a variety of shapes to fit your specific facility requirements, including round, square, and rectangular. -
Anaesthetic Screen Support Pad
- Replacement pad to suit Anaesthetic Screen Support
- Seamless vinyl covering.
-
Linen Trolley
Australian Made 304 Grade Stainless Steel Trolley. Measurements: 950mm(L) x 800mm(W) x 1200mm(H). Bottom Shelf: 50kg weight capacity. Castors: 4x 125mm Non-Locking Castors. -
Disposable Stacked Head Ring
Designed for use with standard reusable tables or positioning pads, the Hipac single use, non-sterile stacked head rings are manufactured in Australia from high quality foam materials. As single use items, they minimise the risk of cross contamination and avoid the time and expense of cleaning for rapid turnaround of equipment. Supplied in a carton of 12 single use attacked head rings, they are ideal for any medical facility. -
Flush Pull Handle, Square
Square Flush Pull Handle measures 50mm on each side, providing a recessed design with a satin stainless steel finish that gives a sleek appearance. The handle is held in place with concealed screws for a clean and professional look. Choose from different shapes to fit your facility's requirements: Round, or Rectangle. -
Recessed Anti-Ligature Pull Handle
The Recessed Anti-Ligature Pull Handle is a compact option from the Primera pull handle range, measuring only 90mm x 106mm and constructed from 3mm solid steel. The '726' handle is suitable for a variety of applications, from cupboards to doors in units with challenging behaviour, due to its lack of protrusions. It meets the requirements of TS001 at level 4 and is available in Satin Stainless Steel electro-plated finish as a standard product, with other finishes available upon request. The handle is also supplied with pin torx anti-tamper fixing screws for added security. -
Right Angle Lateral Support Pad
- Replacement pad made to suit Right Angle Lateral Support.
- Vinyl-covered foam pad.
- Mounted via Hook and Loop attachment.
-
Vertical Support
- Adjusts vertically.
- Requires one Size 16 clamp for mounting.
- Requires pad. Pad sold separately. Replacement Pads can be found here: Vertical Support Pad
-
Popliteal Support
This product has multiple variants. The options may be chosen on the product page<ul><li>Standard supports are stainless steel. Radiolucent options are available.</li><li>Requires one clamp for mounting.</li><li>Requires pad, pad sold separately. Replacement pads can be found here: Popliteal Support Pad.</li></ul> -
Utility Trolley
Australian Made 304 Grade Stainless Steel Trolley supplied with Polyethylene Bins. Measurements: 820mm(L) x 490mm(W) x 910mm(H). Bin Sizes: Top - 640mm(L) x 410mm(W) x 270mm(H) Bottom - 640mm(L) x 410mm(W) x 210mm(H) Castors: 4x 125mm Non-Locking Castors -
Slip In Arm Support Pad
- Replacement Pad to suit Slip In Arm Support
-
List Cart
<ul><li>Australian Made 304 Grade Stainless Steel Trolley with hinged doors, concealed push handle, bumper surround andadjustable shelves.</li><li>Top Shelf: 50kg weight capacity</li><li>Castors: 4x 125mm Non-Locking Castors</li></ul>Measurements: 1200mm(L) x 600mm(W) x 1430mm(H) -
Gel Prone Headrest with Interchangeable Base
- Including three different heights to provide more customised positioning.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Slip In Side Support
- Mounts behind the side rail of the operating table.
- Requires pad, pad sold separately. Replacement pads can be found here: Slip in Side Support Pad.
-
2 Shelf Clearing Trolley
- Australian Made 304 Grade Stainless Steel Trolley with Two Shelves with double safety folds to all shelf edges, undershelf bracing and four precision ball bearing castors.
- Shelves: 50kg weight capacity per shelf.
- Castors: 4x 125mm Non-Locking Drawers.
-
Round Lateral Support Pad
- Replacement Pad made to suit Round Lateral Support.
- Seamless Pad.
-
Tubular Support Pads
- Replacement pad made to suit Tubular Body Support and Tubular Support.
- Seamlessvinyl-covered foam.
-
Emergency Pull Handle
The Emergency Pull Handle is a vital accessory in any healthcare facility with anti-barricade doors. It provides additional grip to overcome any internal force generated by a patient holding the handle from the inside of the door, preventing clinical staff access. By sliding the Emergency Pull Handle over the pinch grip handle, the door can be opened outwardly by pulling it. The length of the handle is designed to allow multiple staff members to participate in pulling the door, ensuring swift entry to the barricaded room. The Emergency Pull Handle is compatible only with 729 handles. -
Round Lateral Support
. Vertical, horizontal and rotational adjustment. . Seamless pad, included. Replacement Pads can be found here: Round Lateral Support Pads . Requires one Size 17 Clamp for mounting. -
3 Shelf Clearing Trolley
Australian Made 304 Grade Stainless Steel Trolley with two shelves with double safety folds to all shelf edges, undershelf bracing and four precision ball bearing castors. -
Contour Anti-Ligature 90 Degree Grab Rail, 700mm x 900mm
The Contour Anti-Ligature Grab Rail is designed to be free of ligature points whether installed vertically or horizontally. It features a sloping cap on one end to prevent anything from being looped completely around the rail. The open end of the rail allows for easy drainage, which eliminates hygiene and infection control issues typically associated with traditional infilled rails. This grab rail is 700mm x 900mm in size.This product has multiple variants. The options may be chosen on the product page -
Prone Anaesthetic Pillow
- Designed to provide support for prone positioning, allowing for safe positioning of intubated patients.
- Twin layered foam with soft vinyl cover.
-
Form-A-Screen
- Flexible anaesthetic screen, shapes into any configuration.
- Requires two size 16 clamps for mounting.
-
Resuscitation Trolley – Deluxe
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 6x 125mm(D) Half Drawers, 1x 250mm(D) Full Width Drawer Shelf: 50kg weight capacity Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front
