May, 2023
Cart
You may be interested in…
-
Bulk Collection Trolley
Australian Made 304 Grade Stainless Steel Trolley. Measurements: 900mm(L) x 600mm(W) x 950mm(H). Bottom Shelf: 50kg weight capacity. Castors: 4x 125mm Non-Locking Castors. -
Anaesthetic Screen Support
- Stainless steel construction.
- Requires one size 16 clamps for mounting.
- Requires pad which is sold separately. Replacement pads can be found here: Anaesthetic Screen Support Pad.
-
Round Bar Clamps
Operating theatre tables are fitted with side rails to which positioning equipment is attached. These rails range in size according to their make and origin. In order to achieve stable positioning, the correct sized clamp must be used.This product has multiple variants. The options may be chosen on the product page- Accepts up to size 16 round post.
- Stainless steel construction.
- Clamps to suit A side Surgical Table side rails are direct-on where slots are fitted in side rails.
-
Universal Bar Clamps
Operating theatre tables are fitted with side rails to which positioning equipment is attached. These rails range in size according to their make and origin. In order to achieve stable positioning, the correct sized clamp must be used.This product has multiple variants. The options may be chosen on the product page- Accepts most brands of gas assisted stirrups.
- Accepts up to size 17 round post.
- Accepts size 33 and 34 rectangular bar.
- Lightweight aluminium construction.
- Clamps to suit A size rails are direct-on where slots are fitted in side rail.
-
Prone Anaesthetic Pillow
- Designed to provide support for prone positioning, allowing for safe positioning of intubated patients.
- Twin layered foam with soft vinyl cover.
-
3 Shelf Clearing Trolley
Australian Made 304 Grade Stainless Steel Trolley with two shelves with double safety folds to all shelf edges, undershelf bracing and four precision ball bearing castors. -
Tube Holder
- Impact resistant polycarbonate.
- Slotted to accept tubing.
- Slips under table mattress and is supported by patient's weight.
-
Debello Lateral Hip Positioner Set
The Debello Lateral Hip Positioner is a patient positioning device that assists the surgical team in correctly positioning patients for hip surgery while providing improved access around the patient and operative site. This is achieved by the ability to reduce the length of the lateral bars for larger patients without limiting the use of the device to support smaller patients. The support incorporates three seamless, vinyl-covered foam pads designed to provide a reduced risk of pressure injury when compared with traditional hip positioning pads.- Assists the surgical team in correctly positioning the patient for hip surgery.
- Improves access around the patient and operative site.
- Integrated lateral end stops.
- Pads are included. Replacement seamless vinyl-covered foam pads are available, reducing the risk of pressure injuries: Debello Lateral Hip Positioner Pads.
- Horizontal and vertical adjustment.
- Requires two size 16 clamps for mounting.
- Pole length 450mm (can be shortened by 200mm).
-
Resuscitation Trolley – Combo
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 4x 125mm(D) Half Drawers, 1x 125mm(D) Full Width Drawer Shelves: 50kg weight capacity per shelf Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Gel Donut Head Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Anaesthetic Pillow
- Vinyl covered with chemically sealed seams.
-
Nestable Tables Set
Set of 3 Australian Made 304 Grade Stainless Steel Tables with four precision ball bearing castors (per trolley). Shelf: 50kg weight capacity. Measurements: 1x Large - 1000mm(L) x 600mm(W) x 900mm(H) 1x Medium - 940mm(L) x 510mm(W) x 870mm(H) 1x Small - 760mm(L) x 500mm(W) x 830mm(H) -
Gel Lateral Positioner
- Consists of a vinyl covered foam support with removable gel sheet.
- Protects arm and shoulder in lateral positioning.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Orthopaedic Hip Rest
• Designed to suit Amsco/Steris and 777 orthopaedic traction frames. • Radiolucent carbon fibre construction. • Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Hip Rest -
Narrow Rotatable Lateral Support
- Vertical, horizontal and rotational adjustment.
- Can be used as shoulder rests when purchased as a pair.
- Size 17 vertical post.
- Requires one Size 17 Clamp for mounting.
- Requires Pad. Sold separately. Replacement Pads can be found here: Narrow Rotatable Lateral Support Pads.
-
Resuscitation Trolley – Deluxe
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 6x 125mm(D) Half Drawers, 1x 250mm(D) Full Width Drawer Shelf: 50kg weight capacity Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Lateral Hip Positioner Replacement Pads
This product has multiple variants. The options may be chosen on the product page- Replacement Pad Assembly to suit Lateral Hip Positioner.
- Latex-free.
-
Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -
Anaesthetic Trolley – Deluxe
Australian Made 304 Grade Stainless Steel Trolley with two side shelves, key lock, soft closing drawers, side and back rails and four precision ball bearing castors. Trolley Measurements: 900mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 2x 75mm(D), 2x 100mm(D), 2x 150mm(D) x 600mm(W). Shelves: 50kg weight capacity per shelf Castors: 2 x 125mm Non-Locking Castors 2 x 125mm Locking Castors
