May, 2023
Cart
You may be interested in…
-
Curved Lateral Support Pad
- Replacement pad made to suit Curved Lateral Support, Curved Support and Curved Support Non-Rotating.
- Vinyl-covered foam.
-
Vacuform Non Slip Foil
The secret of perfected adaption to the body by VACUFORM surgical mattresses is microballs of styrofoam, which are stabilised by vacuum to give a lasting, completely supportive form. Reducing the diameter of the filter balls by a fifth enables more precise adaption of the surgical mattress to the body. The MicroSpace system significantly increases the feeling of physical comfort for the patient compared to conventional fillings. Particularly during time-consuming operations or with patients who are older and in poor condition, there is a risk of pressure points leading to acute decubital ulcers and paresis (paralysis from nerve damage). The individual, ergonomic body adaptation of VACUFORM surgical mattresses effectively prevents such damage. The support pressure of the patient is optimally distributed over the whole body and thus reduced to a minimum. The microcirculation needed by the skin is unaffected. The patient has a noticeable feeling of comfort, lightness and warmth.This product has multiple variants. The options may be chosen on the product page- Prevents Vacuform mattress slipping in extreme angles.
- Easy to clean and reusable.
- Available as a roll, or a single piece.
- To be used underneath the Vacuform Bean Bags.
-
Anaesthetic Screen Support Pad
- Replacement pad to suit Anaesthetic Screen Support
- Seamless vinyl covering.
-
Prone Anaesthetic Pillow
- Designed to provide support for prone positioning, allowing for safe positioning of intubated patients.
- Twin layered foam with soft vinyl cover.
-
Side Rail Kit
This product has multiple variants. The options may be chosen on the product page- Designed to suit Skytron 3600, 3500 and 6700 Series operating tables.
- Available for other table models. Contact us with your specific requirements.
-
Tube Holder
- Impact resistant polycarbonate.
- Slotted to accept tubing.
- Slips under table mattress and is supported by patient's weight.
-
Lithotomy Storage Cart
Provision for Short Back Section, Short Mid-Section Pad, Gas Assisted Stirrups and Lightweight Leg Support.- Accepts table leg section when Lithotomy kit is in use.
- Accessories shown in image are not included.
- Made to suit Skytron and Mizuho Operating Tables. Can be manufactured to suit most operating table attachments.
-
Urology Bracket Set
This product has multiple variants. The options may be chosen on the product page- Drain system that fixes to the operating table via the side rails.
- Requires disposable pouch.
-
Gel Horseshoe Head Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
IV Pole – Aluminium Base
Australian Made 304 Grade Stainless Steel IV Pole with Aluminium Base. Measurements: Base Diameter: 560mm Safe Working Height Range: 1350 - 2100mm Product Weight: 7.14kg Safe Working Load: 6kg per hookThis product has multiple variants. The options may be chosen on the product page -
Bowl Stands
Hipac's Australian-made Stainless Steel Bowl Stand features a polymer base and is designed to hold a 300mm diameter bowl. Available in single and double stands, it offers flexibility to healthcare settings. Bowls are sold separately, and the stand measures 560mm(L) x 560mm(W) x 850mm(H). Feel free to reach out to us and explore the options we offer for customising and creating unique products to meet your specific requirements.This product has multiple variants. The options may be chosen on the product page -
Donut Head Ring
This product has multiple variants. The options may be chosen on the product page- Seamless vinyl coated foam head ring.
-
Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -
Disposable Patient Care Kit to suit Jackson Table
A complete, single use patient care kit designed for use with the Jackson Table. Manufactured in Australia, they minimise the risk of cross contamination and avoid extensive cleaning.This product has multiple variants. The options may be chosen on the product page -
Anaesthetic Pillow
- Vinyl covered with chemically sealed seams.
-
Orthopaedic Lightweight Leg Support
- Radiolucent carbon fibre construction.
- Designed to suit Amsco / Steris 777 orthopaedic traction frames.
- Requires pad, pad sold separately. Replacement pad can be found here: Orthopaedic Lightweight Leg Support Pads.
- Includes Cover. Replacement Covers can be found here: Orthopaedic Lightweight Leg Support Cover
-
One Drawer Instrument Trolley
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Size Options: 490mm(L) x 490mm(W) x 900mm(H) 600mm(L) x 490mm(W) x 900mm(H) 750mm(L) x 490mm(W) x 900mm(H) 900mm(L) x 490mm(W) x 900mm(H) Castors: 2x 75mm Non-Locking Castors on back 2x 75mm Locking Castors on front Drawer Dimensions: 1 x 125mm(D). Shelves: 50kg weight capacity per shelf. Available Accessories: Drawer dividers Drawer linersThis product has multiple variants. The options may be chosen on the product page -
IV Pole – Stacking
IV Pole - Stacking Australian Made 304 Grade Stainless Steel IV Pole with Stacking Base. Base design allows multiple IV Poles to be stacked together to make it easier for staff when transporting and to minimise storage size. Measurements: Safe Working Height Range: 1350 - 2050mm Base Diameter: 560mm Safe Working Load: 6kg per hook Product Weight: 9.16kgThis product has multiple variants. The options may be chosen on the product page -
Slip In Arm Support Pad
- Replacement Pad to suit Slip In Arm Support
-
Perineal Post Pad
This product has multiple variants. The options may be chosen on the product page- Replacement pad to suit Perineal Post.
- Seamless vinyl covering.
-
Prone Arm Support
- Fully radiolucent.
- Requires two pads, pads sold separately. Replacement pads can be found here: Prone Arm Support Pad.
-
Gel Donut Head Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Orthopaedic Sacral Rest
This product has multiple variants. The options may be chosen on the product page- Designed to suit Amsco/Steris and 777 orthopaedic traction frames.
- Radiolucent carbon fibre construction.
- Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Sacral Rest Pad.
-
Horseshoe Head Rest
- Seamless vinyl covered foam with solid base and indentation for neck.
-
Urology Drain Pan
- Can be manufactured for most makes and models of tables
- Tray strainer and hose included
-
Wide Lateral Support Pads
This product has multiple variants. The options may be chosen on the product page- Made to suit Wide Lateral Support.
- Two pad types available: flat or curved.
- Seamless vinyl-covered foam.
-
Disposable Patient Care Kit to suit Wilson Frame
A complete, single-use patient care kit designed for use with the Wilson Table. Manufactured in Australia, they minimise the risk of cross-contamination and avoid extensive cleaning. The kit includes a full positioning kit, including:This product has multiple variants. The options may be chosen on the product page- Arm Cradles
- Anaesthetic Head Pillow
- Pad Sleeves
- Transverse Bar Pad
- Base Cover Drape
-
IV Pole – Polymer Base
Australian Made 304 Grade Stainless Steel IV Pole with Polymer Base. Measurements: Product Weight: 5.1kg. Base Diameter: 560mm. Safe Working Height Range: 1350 - 2100mm. Safe Working Load: 6kg per hook.This product has multiple variants. The options may be chosen on the product page -
Slip In Side Support
- Mounts behind the side rail of the operating table.
- Requires pad, pad sold separately. Replacement pads can be found here: Slip in Side Support Pad.
-
Large Orthopaedic Sacral Rest
This product has multiple variants. The options may be chosen on the product page- Designed to suit Amsco/Steris and 777 orthopaedic traction frames.
- Radiolucent carbon fibre construction.
- Available with one or three cutouts.
- Requires pad, pad sold separately. Replacement pads can be found here: Large Sacral Rest Pad.
-
Anaesthetic Screen Support
- Stainless steel construction.
- Requires one size 16 clamps for mounting.
- Requires pad which is sold separately. Replacement pads can be found here: Anaesthetic Screen Support Pad.
-
-
Resuscitation Trolley – Classic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 2x 125mm(D) Half Drawers Shelves: 50kg weight capacity per shelf Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Ortho Drape Support
- To suit Amsco Steris and 777 Orthopaedic Traction Frames.
- Stainless steel and vinyl construction.
-
Round Bar Clamps
Operating theatre tables are fitted with side rails to which positioning equipment is attached. These rails range in size according to their make and origin. In order to achieve stable positioning, the correct sized clamp must be used.This product has multiple variants. The options may be chosen on the product page- Accepts up to size 16 round post.
- Stainless steel construction.
- Clamps to suit A side Surgical Table side rails are direct-on where slots are fitted in side rails.
-
Straight Lateral Support Pads
This product has multiple variants. The options may be chosen on the product page- Replacement pad made to suit Straight Lateral Support and Straight Lateral Support, Short Plate.
- Vinyl-covered foam.
-
IV Pole – Offset Post
Australian Made 304 Grade Stainless Steel IV Pole with Offset Post, Push Handle and Aluminium Base. Measurements: Safe Working Height Range: 1350 - 2050mm Base Diameter: 560mm Safe Working Load: 6kg per hook Product Weight: 6kgThis product has multiple variants. The options may be chosen on the product page
