May, 2023
Cart
You may be interested in…
-
Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -
Kestrel Coat Hook
The Kestrel coat hook offers the expected functionality of a traditional hook with added safety features. The magnetic bracket releases the hook if an abnormal load, such as an attempted ligature, is applied, removing any ligature points. The hook is made of pliable material, rendering it ineffective for self-harm or as a weapon. After the event, the hook can be reattached to the magnetic bracket for continued use. -
Tube Holder
- Impact resistant polycarbonate.
- Slotted to accept tubing.
- Slips under table mattress and is supported by patient's weight.
-
Resuscitation Trolley – Deluxe
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 6x 125mm(D) Half Drawers, 1x 250mm(D) Full Width Drawer Shelf: 50kg weight capacity Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Round Bar Clamps
Operating theatre tables are fitted with side rails to which positioning equipment is attached. These rails range in size according to their make and origin. In order to achieve stable positioning, the correct sized clamp must be used.This product has multiple variants. The options may be chosen on the product page- Accepts up to size 16 round post.
- Stainless steel construction.
- Clamps to suit A side Surgical Table side rails are direct-on where slots are fitted in side rails.
-
CLIK Load Release Conventional Towel Rail
The Clik load release conventional towel rail offers the functionality of a regular towel rail with an added safety feature. In case of an attempted ligature, the rail brackets are designed to release and the rail drops away, preventing any harm. The rail can be easily refitted to the brackets by pushing the rail holders back into place. The brackets have heat-treated stainless-steel spring clips, ensuring consistent safety and performance, even after multiple releases and reattachments. -
Kestrel Polycarbonate Wardrobe Rail
The Kestrel Polycarbonate Wardrobe Rail offers the expected convenience of a traditional wardrobe rail with added safety features. If an abnormal load is applied, such as an attempted ligature, the magnetic brackets will release, preventing a successful ligature. After the event, the rail can be easily reattached to the magnetic brackets. This rail is made of a lightweight clear polycarbonate tube, which reduces the risk of it being used as a weapon or hiding contraband.This product has multiple variants. The options may be chosen on the product page -
Multi Drawer Trolley
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 900mm(L) x 490mm(W) x 900mm(H). Drawer Measurements: 4x 100mm(D), 2x 150mm(D). Shelf: 50kg weight capacity. Castors: 2x 125mm Non-Locking Castors on back. 2x 125mm Locking Castors on front. -
J-Trac Anti-Ligature Wardrobe Rail and Clothes Hanger System
The J-Trac anti-ligature wardrobe rail and clothes hanger system has been designed to provide patients with the normality of a fully functioning wardrobe, whilst also reducing the risks associated with ligature incidents. The clothes hangers are made from a robust and elastic material that prevents them from being used as a weapon or to hide contraband. The wardrobe rail is securely fastened in place with security fasteners, preventing its removal and use as a weapon. The rail is also designed to prevent patients from jamming or hiding contraband in or behind it. Each kit comes with all the necessary components and can be trimmed to fit during installation.This product has multiple variants. The options may be chosen on the product page -
Orthopaedic Lightweight Leg Support
- Radiolucent carbon fibre construction.
- Designed to suit Amsco / Steris 777 orthopaedic traction frames.
- Requires pad, pad sold separately. Replacement pad can be found here: Orthopaedic Lightweight Leg Support Pads.
- Includes Cover. Replacement Covers can be found here: Orthopaedic Lightweight Leg Support Cover
-
Anaesthetic Trolley – Deluxe
Australian Made 304 Grade Stainless Steel Trolley with two side shelves, key lock, soft closing drawers, side and back rails and four precision ball bearing castors. Trolley Measurements: 900mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 2x 75mm(D), 2x 100mm(D), 2x 150mm(D) x 600mm(W). Shelves: 50kg weight capacity per shelf Castors: 2 x 125mm Non-Locking Castors 2 x 125mm Locking Castors -
Prone Anaesthetic Pillow
- Designed to provide support for prone positioning, allowing for safe positioning of intubated patients.
- Twin layered foam with soft vinyl cover.
-
Resuscitation Trolley – Combo
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 4x 125mm(D) Half Drawers, 1x 125mm(D) Full Width Drawer Shelves: 50kg weight capacity per shelf Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Anaesthetic Pillow
- Vinyl covered with chemically sealed seams.
-
Resuscitation Trolley – Basic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 2x 125mm(D) Half Drawers Shelves: 50kg weight capacity per shelf Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Orthopaedic Hip Rest
• Designed to suit Amsco/Steris and 777 orthopaedic traction frames. • Radiolucent carbon fibre construction. • Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Hip Rest -
Anaesthetic Trolley – Classic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 600mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 1x 250mm(D), 3x 125mm(D) Shelf: 50kg weight capacity Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Disposable Popliteal/Tubular Pad
A single use, non-sterile pad that minimises any risk of cross contamination and the expense of cleaning, providing easier maintained, efficient workflows for busy theatres. Suitable for most popliteal and tubular supports, they are manufactured right here in Australia. Offered in a pack of 12 pads at 275mm (Length) x 140mm (Diameter), we can offer custom options on this product. As with all our disposable products, we can provide custom solutions to suit any need, please talk to us for further information. -
Orthopaedic Popliteal Support
This product has multiple variants. The options may be chosen on the product page- To suit Amsco/Steris and 777 or Ortho Trax Orthopaedic Traction Frames.
- Size 35 post.
- Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Popliteal Support Pad.
-
Orthopaedic Sacral Rest
This product has multiple variants. The options may be chosen on the product page- Designed to suit Amsco/Steris and 777 orthopaedic traction frames.
- Radiolucent carbon fibre construction.
- Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Sacral Rest Pad.
-
Anaesthetic Screen Support
- Stainless steel construction.
- Requires one size 16 clamps for mounting.
- Requires pad which is sold separately. Replacement pads can be found here: Anaesthetic Screen Support Pad.
-
Kestrel Load Release Mounting Plate
Kestrel Load Release Mounting Plate offers a simple and effective way to convert various items to anti-ligature status. These plates are available in three sizes and can be held vertically against the wall using the Kestrel brackets hidden behind them. The plates feature a sleek design that blends seamlessly into any environment. They are suitable for mounting products like soap dispensers, paper towel dispensers, and toilet roll holders, however, it is crucial to assess the potential risks associated with the product to ensure the safety of patients and staff.This product has multiple variants. The options may be chosen on the product page -
Healsafe Toilet Roll Holder
The Healsafe Toilet Roll Holder is a safe and practical solution for facilities where self-harm or weaponization may be a concern. It features a strong and flexible hook unit with smooth edges to prevent harm and a wall bracket that allows for easy release and reattachment in case of an abnormal load. -
Hipac Orthopaedic Traction Boots
This product has multiple variants. The options may be chosen on the product page- Vinyl boots with hook and loop fastenings.
- Four straps for increased traction.
- Easy to clean vinyl construction.
- Sold in pairs.
- Can be manufactured to suit other traction frames.
