May, 2023
Cart
You may be interested in…
-
One Drawer Instrument Trolley
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Size Options: 490mm(L) x 490mm(W) x 900mm(H) 600mm(L) x 490mm(W) x 900mm(H) 750mm(L) x 490mm(W) x 900mm(H) 900mm(L) x 490mm(W) x 900mm(H) Castors: 2x 75mm Non-Locking Castors on back 2x 75mm Locking Castors on front Drawer Dimensions: 1 x 125mm(D). Shelves: 50kg weight capacity per shelf. Available Accessories: Drawer dividers Drawer linersThis product has multiple variants. The options may be chosen on the product page -
Tube Holder
- Impact resistant polycarbonate.
- Slotted to accept tubing.
- Slips under table mattress and is supported by patient's weight.
-
Anaesthetic Pillow
- Vinyl covered with chemically sealed seams.
-
Slip In Side Support
- Mounts behind the side rail of the operating table.
- Requires pad, pad sold separately. Replacement pads can be found here: Slip in Side Support Pad.
-
Prone Anaesthetic Pillow
- Designed to provide support for prone positioning, allowing for safe positioning of intubated patients.
- Twin layered foam with soft vinyl cover.
-
Large Orthopaedic Sacral Rest
This product has multiple variants. The options may be chosen on the product page- Designed to suit Amsco/Steris and 777 orthopaedic traction frames.
- Radiolucent carbon fibre construction.
- Available with one or three cutouts.
- Requires pad, pad sold separately. Replacement pads can be found here: Large Sacral Rest Pad.
-
Wide Lateral Support Pads
This product has multiple variants. The options may be chosen on the product page- Made to suit Wide Lateral Support.
- Two pad types available: flat or curved.
- Seamless vinyl-covered foam.
-
Ortho Drape Support
- To suit Amsco Steris and 777 Orthopaedic Traction Frames.
- Stainless steel and vinyl construction.
-
IV Pole – Offset Post
Australian Made 304 Grade Stainless Steel IV Pole with Offset Post, Push Handle and Aluminium Base. Measurements: Safe Working Height Range: 1350 - 2050mm Base Diameter: 560mm Safe Working Load: 6kg per hook Product Weight: 6kgThis product has multiple variants. The options may be chosen on the product page -
Urology Bracket Set
This product has multiple variants. The options may be chosen on the product page- Drain system that fixes to the operating table via the side rails.
- Requires disposable pouch.
-
Orthopaedic Lightweight Leg Support
- Radiolucent carbon fibre construction.
- Designed to suit Amsco / Steris 777 orthopaedic traction frames.
- Requires pad, pad sold separately. Replacement pad can be found here: Orthopaedic Lightweight Leg Support Pads.
- Includes Cover. Replacement Covers can be found here: Orthopaedic Lightweight Leg Support Cover
-
Bowl Stands
Hipac's Australian-made Stainless Steel Bowl Stand features a polymer base and is designed to hold a 300mm diameter bowl. Available in single and double stands, it offers flexibility to healthcare settings. Bowls are sold separately, and the stand measures 560mm(L) x 560mm(W) x 850mm(H). Feel free to reach out to us and explore the options we offer for customising and creating unique products to meet your specific requirements.This product has multiple variants. The options may be chosen on the product page -
Slip In Arm Support Pad
- Replacement Pad to suit Slip In Arm Support
-
-
Curved Lateral Support Pad
- Replacement pad made to suit Curved Lateral Support, Curved Support and Curved Support Non-Rotating.
- Vinyl-covered foam.
-
Urology Drain Pan
- Can be manufactured for most makes and models of tables
- Tray strainer and hose included
-
Round Bar Clamps
Operating theatre tables are fitted with side rails to which positioning equipment is attached. These rails range in size according to their make and origin. In order to achieve stable positioning, the correct sized clamp must be used.This product has multiple variants. The options may be chosen on the product page- Accepts up to size 16 round post.
- Stainless steel construction.
- Clamps to suit A side Surgical Table side rails are direct-on where slots are fitted in side rails.
-
Perineal Post Pad
This product has multiple variants. The options may be chosen on the product page- Replacement pad to suit Perineal Post.
- Seamless vinyl covering.
-
IV Pole – Stacking
IV Pole - Stacking Australian Made 304 Grade Stainless Steel IV Pole with Stacking Base. Base design allows multiple IV Poles to be stacked together to make it easier for staff when transporting and to minimise storage size. Measurements: Safe Working Height Range: 1350 - 2050mm Base Diameter: 560mm Safe Working Load: 6kg per hook Product Weight: 9.16kgThis product has multiple variants. The options may be chosen on the product page -
Anaesthetic Screen Support Pad
- Replacement pad to suit Anaesthetic Screen Support
- Seamless vinyl covering.
-
Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -
Lithotomy Storage Cart
Provision for Short Back Section, Short Mid-Section Pad, Gas Assisted Stirrups and Lightweight Leg Support.- Accepts table leg section when Lithotomy kit is in use.
- Accessories shown in image are not included.
- Made to suit Skytron and Mizuho Operating Tables. Can be manufactured to suit most operating table attachments.
-
Anaesthetic Screen Support
- Stainless steel construction.
- Requires one size 16 clamps for mounting.
- Requires pad which is sold separately. Replacement pads can be found here: Anaesthetic Screen Support Pad.
-
Orthopaedic Sacral Rest
This product has multiple variants. The options may be chosen on the product page- Designed to suit Amsco/Steris and 777 orthopaedic traction frames.
- Radiolucent carbon fibre construction.
- Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Sacral Rest Pad.
-
IV Pole – Polymer Base
Australian Made 304 Grade Stainless Steel IV Pole with Polymer Base. Measurements: Product Weight: 5.1kg. Base Diameter: 560mm. Safe Working Height Range: 1350 - 2100mm. Safe Working Load: 6kg per hook.This product has multiple variants. The options may be chosen on the product page -
Resuscitation Trolley – Classic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 2x 125mm(D) Half Drawers Shelves: 50kg weight capacity per shelf Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
IV Pole – Aluminium Base
Australian Made 304 Grade Stainless Steel IV Pole with Aluminium Base. Measurements: Base Diameter: 560mm Safe Working Height Range: 1350 - 2100mm Product Weight: 7.14kg Safe Working Load: 6kg per hookThis product has multiple variants. The options may be chosen on the product page -
Straight Lateral Support Pads
This product has multiple variants. The options may be chosen on the product page- Replacement pad made to suit Straight Lateral Support and Straight Lateral Support, Short Plate.
- Vinyl-covered foam.
