May, 2023
Cart
You may be interested in…
-
Mayo Table – Two Leg Flat Base
Australian Made 304 Grade Stainless Steel Mayo Table with Two Leg Flat Base. Adjustable Height: 820 - 1120mm Tray Size: 560(L) x 410mm(W) Castors: 2x 50mm Non-Locking Castors -
Multi Drawer Trolley
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 900mm(L) x 490mm(W) x 900mm(H). Drawer Measurements: 4x 100mm(D), 2x 150mm(D). Shelf: 50kg weight capacity. Castors: 2x 125mm Non-Locking Castors on back. 2x 125mm Locking Castors on front. -
Nestable Table (Medium)
Australian Made 304 Grade Stainless Steel Table with four precision ball bearing castors. Designed to fit between our Large and Small Nestable Tables for a compact and modular storage solution in the Nestable Tables Set. Measurements: 940mm(L) x 510mm(W) x 870mm(H) Shelf: 50kg weight capacity. -
Floor Mounted Door Closer
The Floor Mounted Double Action Door Closer can be used in conjunction with the double or single swing hinge. This door closer is a discrete solution that can be used in areas of high risk to minimise ligature points. This closer can be supplied with an optional mechanical hold back feature. When the door is opened to the required hold back point, it will latch in position and remain open until manually pulled, to disengage the hold back.This product has multiple variants. The options may be chosen on the product page -
Removable Door Stop, Aluminium
The Aluminium Removable Door Stop provides an effective solution to prevent barricade attempts in combination with a double swing hinge. While the door is in normal use, the stop stays locked to the door frame and acts as a traditional stop to prevent the door from swinging outward. In the case of a barricade, the stop can be unlatched from the frame using a key and opened outward to enable the door to swing away from the obstruction. Available in right or left-handed configuration, the door stop comes in 2100mm and 2400mm lengths and requires a 4mm key. This door stop is rigorously tested to Level B4 TS001 Grade.This product has multiple variants. The options may be chosen on the product page -
Mayo Table – 4 Leg Base
Australian Made 304 Grade Stainless Steel Mayo Table with Four Leg Base. Adjustable Height: 820 - 1120mm Tray Size: 560(L) x 410mm(W) Castors: 4x 50mm Non-Locking Castors -
IV Pole – Stacking
IV Pole - Stacking Australian Made 304 Grade Stainless Steel IV Pole with Stacking Base. Base design allows multiple IV Poles to be stacked together to make it easier for staff when transporting and to minimise storage size. Measurements: Safe Working Height Range: 1350 - 2050mm Base Diameter: 560mm Safe Working Load: 6kg per hook Product Weight: 9.16kgThis product has multiple variants. The options may be chosen on the product page -
Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -
Tube Holder
- Impact resistant polycarbonate.
- Slotted to accept tubing.
- Slips under table mattress and is supported by patient's weight.
-
Large Orthopaedic Sacral Rest
This product has multiple variants. The options may be chosen on the product page- Designed to suit Amsco/Steris and 777 orthopaedic traction frames.
- Radiolucent carbon fibre construction.
- Available with one or three cutouts.
- Requires pad, pad sold separately. Replacement pads can be found here: Large Sacral Rest Pad.
-
Kestrel Coat Hook
The Kestrel coat hook offers the expected functionality of a traditional hook with added safety features. The magnetic bracket releases the hook if an abnormal load, such as an attempted ligature, is applied, removing any ligature points. The hook is made of pliable material, rendering it ineffective for self-harm or as a weapon. After the event, the hook can be reattached to the magnetic bracket for continued use. -
Orthopaedic Lightweight Leg Support
- Radiolucent carbon fibre construction.
- Designed to suit Amsco / Steris 777 orthopaedic traction frames.
- Requires pad, pad sold separately. Replacement pad can be found here: Orthopaedic Lightweight Leg Support Pads.
- Includes Cover. Replacement Covers can be found here: Orthopaedic Lightweight Leg Support Cover
-
Hourglass Arm Table
- Radiolucent top.
- Height adjustable telescopic leg provides additional support.
- Requires two size 16 clamps for mounting.
- Requires pad, sold separately. Replacement pads can be found here: Hourglass Arm Table Pad.
-
Nestable Table (Small)
Australian Made 304 Grade Stainless Steel Table with four precision ball bearing castors. Designed to fit under Large and Medium Nestable Tables for a compact and modular storage solution in the Nestable Tables Set. Measurements: 760mm(L) x 500mm(W) x 830mm(H). Shelf: 50kg weight capacity. -
Perineal Post Pad
This product has multiple variants. The options may be chosen on the product page- Replacement pad to suit Perineal Post.
- Seamless vinyl covering.
-
Orthopaedic Sacral Rest
This product has multiple variants. The options may be chosen on the product page- Designed to suit Amsco/Steris and 777 orthopaedic traction frames.
- Radiolucent carbon fibre construction.
- Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Sacral Rest Pad.
-
Anti-Ligature Escutcheons
The Anti-Ligature Escutcheons by Hipac feature a chamfered edge design that prevents the attachment of a ligature to the keyway, ensuring patient safety. The escutcheons are available in Euro and Oval profiles, making them compatible with most cylinder types. These anti-ligature products have passed the highest level of DHF TS001 testing, achieving a Grade A4 rating.This product has multiple variants. The options may be chosen on the product page -
Four Drawer Instrument Trolley
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Size Options: 490mm(L) x 490mm(W) x 900mm(H) 600mm(L) x 490mm(W) x 900mm(H) 750mm(L) x 490mm(W) x 900mm(H) 900mm(L) x 490mm(W) x 900mm(H) Castors: 2x125mm Non-Locking Castors on back 2x125mm Locking Castors on front Drawer Dimensions: 4 x 125mm(D). Shelves: 50kg weight capacity per shelf. Available Accessories: Drawer dividers Drawer linersThis product has multiple variants. The options may be chosen on the product page -
Kestrel Polycarbonate Wardrobe Rail
The Kestrel Polycarbonate Wardrobe Rail offers the expected convenience of a traditional wardrobe rail with added safety features. If an abnormal load is applied, such as an attempted ligature, the magnetic brackets will release, preventing a successful ligature. After the event, the rail can be easily reattached to the magnetic brackets. This rail is made of a lightweight clear polycarbonate tube, which reduces the risk of it being used as a weapon or hiding contraband.This product has multiple variants. The options may be chosen on the product page -
IV Pole – Aluminium Base
Australian Made 304 Grade Stainless Steel IV Pole with Aluminium Base. Measurements: Base Diameter: 560mm Safe Working Height Range: 1350 - 2100mm Product Weight: 7.14kg Safe Working Load: 6kg per hookThis product has multiple variants. The options may be chosen on the product page -
Nestable Table (Large)
Australian Made 304 Grade Stainless Steel Table with four precision ball bearing castors. Designed to fit over our Small and Medium Nestable Tables for a compact and modular storage solution in the Nestable Tables Set. Measurements: 1000mm(L) x 600mm(W) x 900mm(H). Shelf: 50kg weight capacity -
Anaesthetic Trolley – Classic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 600mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 1x 250mm(D), 3x 125mm(D) Shelf: 50kg weight capacity Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Select Series Anaesthetic Cart
Our select series anaesthetic cart features dual pull-out side shelves, twin poly handles, four premium 125mm castors (including locking, swivel, and directional castors), and a key lock for secure storage. It also includes a durable sealed work surface, full extension ball bearing drawer slides, and an outrigger stabilising frame with bump guards. Please note that accessories are not included but can be purchased separately. Package Inclusions:This product has multiple variants. The options may be chosen on the product page- Select Series Trellis
- Select Series Tilt Bins Five Units
- Select Series Tilts Bins Four Units
- Select Series Tubular Wrap Around Railing
- Glove Box Holder
- Tape Dispenser with Brackets
- Small Drawer Divider Pack (two 76mm(D) trays, four long dividers, eight short dividers)
- Large Drawer Divider Pack (two 127mm(D) trays, two long dividers)
- Waste Container w/Lift Top
- Wire Basket 305(L) x 305(W) x 203mm(D)
- 76mm(D) Tray with 8 Flex Dividers and 14 Ampule Holders
-
Door Top Alarm
The Door Top Alarm (DTA) is an innovative technology that provides hardware integration into the top of timber doors to alert staff of possible ligature attempts. The discreet sensor installed across the door leaf detects the application of weight from ligature attempts or objects jammed between the door and frame. To avoid false alarms, it has an adjustable time delay of 5 to 30 seconds, triggering only with sustained applied weight. Compatible with most duress and staff attack systems, the DTA sends signals to alert the clinical team via audible alarms, staff indicator panels, pagers, handsets or the main nurse station computer.This product has multiple variants. The options may be chosen on the product page -
Ortho Drape Support
- To suit Amsco Steris and 777 Orthopaedic Traction Frames.
- Stainless steel and vinyl construction.
-
CLIK Load Release Corner Shelf
The CLIK Load Release Corner Shelf is designed to release when an abnormal load is applied, like an attempted ligature, causing the shelf to drop away and preventing a successful ligature. The shelf can easily be reattached by pushing it back into the corresponding brackets. The brackets feature heat-treated stainless steel spring clips, allowing the product to release and reattach repeatedly without compromising performance or safety. The shelf is made of 8mm polycarbonate with chamfered edges and rounded corners, making it sturdy and safe for use. -
Single Swing Full Length Anti-Ligature Geared Securahinge
The Single Swing Full Length Anti-Ligature Geared Securahinge is a continuous hinge that is designed to reduce the risk of ligature and self-harm. It features a sloping cap and specially designed bearings, which removes the gap between the door leaf and frame that can be found in butt or piano-style hinges. It opens up to 180 degrees in one direction, making it suitable for applications where the door needs to fold back against the wall. The Securahinge can be installed with either the Floor Mounted Door Closer or the Concealed Door Closer. It can also be cut down to fit the length of the door. This hinge is tested to Level B4 TS001 Grade.This product has multiple variants. The options may be chosen on the product page -
Kestrel Soap Dish – White Plastic
The Kestrel Soap Dish in white plastic is a practical and secure choice for environments where there is a risk of self-harm. Its magnetic wall-mounted bracket is designed to release the soap dish in the event of an abnormal load, allowing it to drop away. Once the incident has passed, the dish can be quickly and easily reattached to the bracket. This product provides a straightforward and efficient solution to minimize the risk of harm in any setting. -
Step Stool
This product has multiple variants. The options may be chosen on the product page- Australian Made 304 Grade Stainless Steel Step Stool with Rubber Feet.
- Replacement rubber feet are available.
-
CLIK Load Release Towel Ring Holders
The CLIK Load Release Towel Ring Holders offer both style and durability in one product. This product can handle rough treatment while still maintaining its aesthetic appeal. Not only does it provide the expected convenience of a traditional towel ring, but it also has a unique safety feature. In the event of an attempted ligature, the bracket releases, and the towel ring drops away to prevent harm. It can be easily reinstated by pushing the towel ring holder back into the bracket. The bracket's heat-treated stainless-steel clip ensures repeated release and reattachment without compromising performance or safety. -
Anaesthetic Pillow
- Vinyl covered with chemically sealed seams.
-
Lithotomy Table
- Australian Made 304 Grade Stainless Steel Lithotomy Table.
- Adjustable Height: 740 - 1140mm.
- Castors: 4x 75mm Locking Castors.
-
IV Pole – Offset Post
Australian Made 304 Grade Stainless Steel IV Pole with Offset Post, Push Handle and Aluminium Base. Measurements: Safe Working Height Range: 1350 - 2050mm Base Diameter: 560mm Safe Working Load: 6kg per hook Product Weight: 6kgThis product has multiple variants. The options may be chosen on the product page -
CLIK Load Release Toilet Roll Holder
The CLIK Load Release Toilet Roll Holder is a practical and safe solution for facilities with potential ligature risks. Its unique design offers the convenience of a traditional toilet roll holder while also ensuring safety. It features a bracket made of heat-treated stainless steel and a spring clip that can repeatedly release and reattach without compromising performance. This product prevents abnormal loads, such as attempted ligatures, from causing harm by allowing the holder to drop away and be easily reattached after the event. -
CLIK Load Release 500mm Straight Shelf
The CLIK Load Release 500mm Straight Shelf is a unique and practical solution for mental health facilities. It has been designed with safety in mind, as the brackets are designed to release when an abnormal load is applied, preventing any ligature attempts. The shelf is made of durable 8mm polycarbonate with chamfered edges and rounded corners, ensuring its safety and durability. After a ligature event, the shelf can be easily reattached by pushing it back into the corresponding brackets. The brackets incorporate heat-treated stainless steel spring clips that allow the product to release and reattach repeatedly without any decline in performance or safety. -
Bowl Stands
Hipac's Australian-made Stainless Steel Bowl Stand features a polymer base and is designed to hold a 300mm diameter bowl. Available in single and double stands, it offers flexibility to healthcare settings. Bowls are sold separately, and the stand measures 560mm(L) x 560mm(W) x 850mm(H). Feel free to reach out to us and explore the options we offer for customising and creating unique products to meet your specific requirements.This product has multiple variants. The options may be chosen on the product page -
Healsafe Shelf Set
The Healsafe Shelf Set is an anti-ligature solution that includes a sturdy shelf and a unique mounting bracket that can withstand abnormal loads. The bracket is secured to the wall with security fasteners, and the shelf is designed to detach from the bracket under abnormal pressure, preventing ligature incidents. The shelf is made of durable plastic with smooth edges, reducing the risk of injury to patients or staff. After an incident, the shelf can be easily reattached to the bracket by clicking it back into place. -
IV Pole – Polymer Base
Australian Made 304 Grade Stainless Steel IV Pole with Polymer Base. Measurements: Product Weight: 5.1kg. Base Diameter: 560mm. Safe Working Height Range: 1350 - 2100mm. Safe Working Load: 6kg per hook.This product has multiple variants. The options may be chosen on the product page -
Moulded Heavy Duty Door Stop
The Moulded Heavy Duty Door Stop is constructed from a durable rubber material that can withstand heavy impact. It is designed to restrict the opening angle of the door or prevent the door from hitting the wall. This doorstop is resistant to vandalism and patient tampering and is flame resistant. It can be mounted on the floor or wall, making it a versatile solution for different applications.
