May, 2023
Cart
You may be interested in…
-
Leg Holder with Seamless Foam Pad
This product has multiple variants. The options may be chosen on the product page- Pair of leg holders with ball joint adjustment.
- Pads included.
- Requires two clamps for mounting.
-
Hip Abduction Pillow
This product has multiple variants. The options may be chosen on the product page- Foam positioner designed for hip abduction positioning.
- Includes hook and loop straps, designed to wrap around the patient's legs and secure to the back of the pad.
-
Disposable Body Support Roll
A single use, non-sterile body support roll manufactured in Australia from high quality foam. Avoiding the risk of cross contamination and the time and expense of cleaning maintenance, they are perfect for busy theatres and offer an economical alternative. Supplied in a carton of 12 singe use body support rolls, each roll is 450mm (Length) x 175mm (Diameter). -
Single Leg Prepper
- Stainless steel construction.
- Requires one size 16 clamp for mounting.
- Requires pad, sold separately. Replacement pads can be found here: Leg Prepper Pads.
-
Removable Door Stop, Aluminium
The Aluminium Removable Door Stop provides an effective solution to prevent barricade attempts in combination with a double swing hinge. While the door is in normal use, the stop stays locked to the door frame and acts as a traditional stop to prevent the door from swinging outward. In the case of a barricade, the stop can be unlatched from the frame using a key and opened outward to enable the door to swing away from the obstruction. Available in right or left-handed configuration, the door stop comes in 2100mm and 2400mm lengths and requires a 4mm key. This door stop is rigorously tested to Level B4 TS001 Grade.This product has multiple variants. The options may be chosen on the product page -
Vacuform Bean Bags
The secret of perfected adaption to the body by VACUFORM surgical mattresses is microballs of styrofoam, which are stabilised by vacuum to give a lasting, completely supportive form. Reducing the diameter of the filter balls by a fifth enables more precise adaption of the surgical mattress to the body. The MicroSpace system significantly increases the feeling of physical comfort for the patient compared to conventional fillings.This product has multiple variants. The options may be chosen on the product page -
Disposable Face Rest Covers to suit Epidural Positioning Device
Our Sani-Cover Medical Grade Disposable Face Rest Covers are designed for use with our Epidural Positioning Device (EPD) or for any crescent-shaped face rest cushion. The 25 gsm, spunbound fabric provides a comfortable, sanitary barrier for the face during care and treatment. Latex-free elastic ensures the cover remains in place but allows for quick and easy changeover between patients. The Face Rest Covers also fit the Epidural Positioning Device (EPD) arm rest. Sold in packs of 50. -
Resuscitation Trolley – Combo
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 4x 125mm(D) Half Drawers, 1x 125mm(D) Full Width Drawer Shelves: 50kg weight capacity per shelf Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
3 Shelf Clearing Trolley
Australian Made 304 Grade Stainless Steel Trolley with two shelves with double safety folds to all shelf edges, undershelf bracing and four precision ball bearing castors. -
Lateral Arm Support
- Adjusts vertically and horizontally, slides, tilts and rotates.
- Requires one size 16 clamp for mounting.
- Requires pad, pad sold separately. Replacement pads can be found here: Lateral Arm Support Pad.
-
Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -
Disposable Body Support Bolster
A single use, non-sterile body support bolster manufactured in Australia from high quality foam. Avoiding the risk of cross contamination and the time and expense of cleaning maintenance, they are perfect for busy theatres and offer an economical alternative. Supplied in a carton of 12 singe use body support bolsters, each is 450mm (Length) x 175mm (Diameter) x 88mm (Height). -
Heavy Duty Lift Assisted Leg Holders / Stirrups
- 360kg patient weight capacity.
- Gas lift assisted stirrups.
- 120 degree boot rotation.
- Handle controlled abduction and adduction.
- Pad set included. Replacement pads can be found here: Stirrup Replacement Pads.
- Requires two size 33 clamps for mounting. We recommend using the Stirrup Clamp.
-
Lift Assisted Leg Holders / Stirrups
- 270kg patient weight capacity.
- Gas lift assisted stirrups.
- 120 degrees boot rotation.
- Handle controlled abduction and adduction.
- Pad set included. Replacement pads can be found here: Stirrup Replacement Pads.
- Requires two size 33 clamps for mounting. We recommend using the Stirrup Clamp.
-
Door Top Alarm
The Door Top Alarm (DTA) is an innovative technology that provides hardware integration into the top of timber doors to alert staff of possible ligature attempts. The discreet sensor installed across the door leaf detects the application of weight from ligature attempts or objects jammed between the door and frame. To avoid false alarms, it has an adjustable time delay of 5 to 30 seconds, triggering only with sustained applied weight. Compatible with most duress and staff attack systems, the DTA sends signals to alert the clinical team via audible alarms, staff indicator panels, pagers, handsets or the main nurse station computer.This product has multiple variants. The options may be chosen on the product page -
Stirrup Clamps
Operating theatre tables are fitted with side rails to which positioning equipment is attached. These rails range in size according to their make and origin. In order to achieve stable positioning, the correct sized clamp must be used.This product has multiple variants. The options may be chosen on the product page- Suits most brands of gas assisted stirrups.
- Accepts size 33 regtangular post.
- Aluminium construction.
- Clamps to suit A Size Rails are direct-on where slots are fitted in side rail.
- Clamps to suit stirrups include, but are not limited to, sirrups with the following boot colours; red, yellow, pink, blue, grey, black, white and purple.
-
Disposable Stacked Head Ring
Designed for use with standard reusable tables or positioning pads, the Hipac single use, non-sterile stacked head rings are manufactured in Australia from high quality foam materials. As single use items, they minimise the risk of cross contamination and avoid the time and expense of cleaning for rapid turnaround of equipment. Supplied in a carton of 12 single use attacked head rings, they are ideal for any medical facility. -
Resuscitation Trolley – Basic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 2x 125mm(D) Half Drawers Shelves: 50kg weight capacity per shelf Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Utility Trolley
Australian Made 304 Grade Stainless Steel Trolley supplied with Polyethylene Bins. Measurements: 820mm(L) x 490mm(W) x 910mm(H). Bin Sizes: Top - 640mm(L) x 410mm(W) x 270mm(H) Bottom - 640mm(L) x 410mm(W) x 210mm(H) Castors: 4x 125mm Non-Locking Castors -
Anaesthetic Trolley – Classic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 600mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 1x 250mm(D), 3x 125mm(D) Shelf: 50kg weight capacity Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Disposable Patient Care Kit to suit Jackson Table
A complete, single use patient care kit designed for use with the Jackson Table. Manufactured in Australia, they minimise the risk of cross contamination and avoid extensive cleaning.This product has multiple variants. The options may be chosen on the product page -
Trapezoid Positioner
- Vinyl covered foam.
- All seams chemically sealed.
-
Knee Arthroscopy Holder
- Holds thigh in a stable position with clamping action.
- Adjusted with winding handle from the side of the operating table.
- Requires pad set, pad set sold separately. Replacement pads can be found here: Knee Arthroscopy Holder Pads.
- Requires one clamp for mounting.
-
Anaesthetic Trolley – Deluxe
Australian Made 304 Grade Stainless Steel Trolley with two side shelves, key lock, soft closing drawers, side and back rails and four precision ball bearing castors. Trolley Measurements: 900mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 2x 75mm(D), 2x 100mm(D), 2x 150mm(D) x 600mm(W). Shelves: 50kg weight capacity per shelf Castors: 2 x 125mm Non-Locking Castors 2 x 125mm Locking Castors -
Curved Lateral Support
This product has multiple variants. The options may be chosen on the product page- Adjusts vertically and horizontally.
- Requires one clamp for mounting.
- Requires pad. Pad sold separately. Replacement Pads can be found here: Curved Lateral Support Pad.
-
Straight Lateral Support Pads
This product has multiple variants. The options may be chosen on the product page- Replacement pad made to suit Straight Lateral Support and Straight Lateral Support, Short Plate.
- Vinyl-covered foam.
-
Resuscitation Trolley – Deluxe
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 6x 125mm(D) Half Drawers, 1x 250mm(D) Full Width Drawer Shelf: 50kg weight capacity Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Anti-Ligature Escutcheons
The Anti-Ligature Escutcheons by Hipac feature a chamfered edge design that prevents the attachment of a ligature to the keyway, ensuring patient safety. The escutcheons are available in Euro and Oval profiles, making them compatible with most cylinder types. These anti-ligature products have passed the highest level of DHF TS001 testing, achieving a Grade A4 rating.This product has multiple variants. The options may be chosen on the product page -
Linen Trolley
Australian Made 304 Grade Stainless Steel Trolley. Measurements: 950mm(L) x 800mm(W) x 1200mm(H). Bottom Shelf: 50kg weight capacity. Castors: 4x 125mm Non-Locking Castors. -
Multi Drawer Trolley
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 900mm(L) x 490mm(W) x 900mm(H). Drawer Measurements: 4x 100mm(D), 2x 150mm(D). Shelf: 50kg weight capacity. Castors: 2x 125mm Non-Locking Castors on back. 2x 125mm Locking Castors on front. -
List Cart
<ul><li>Australian Made 304 Grade Stainless Steel Trolley with hinged doors, concealed push handle, bumper surround andadjustable shelves.</li><li>Top Shelf: 50kg weight capacity</li><li>Castors: 4x 125mm Non-Locking Castors</li></ul>Measurements: 1200mm(L) x 600mm(W) x 1430mm(H) -
Single Swing Full Length Anti-Ligature Geared Securahinge
The Single Swing Full Length Anti-Ligature Geared Securahinge is a continuous hinge that is designed to reduce the risk of ligature and self-harm. It features a sloping cap and specially designed bearings, which removes the gap between the door leaf and frame that can be found in butt or piano-style hinges. It opens up to 180 degrees in one direction, making it suitable for applications where the door needs to fold back against the wall. The Securahinge can be installed with either the Floor Mounted Door Closer or the Concealed Door Closer. It can also be cut down to fit the length of the door. This hinge is tested to Level B4 TS001 Grade.This product has multiple variants. The options may be chosen on the product page -
2 Shelf Clearing Trolley
- Australian Made 304 Grade Stainless Steel Trolley with Two Shelves with double safety folds to all shelf edges, undershelf bracing and four precision ball bearing castors.
- Shelves: 50kg weight capacity per shelf.
- Castors: 4x 125mm Non-Locking Drawers.
-
Moulded Heavy Duty Door Stop
The Moulded Heavy Duty Door Stop is constructed from a durable rubber material that can withstand heavy impact. It is designed to restrict the opening angle of the door or prevent the door from hitting the wall. This doorstop is resistant to vandalism and patient tampering and is flame resistant. It can be mounted on the floor or wall, making it a versatile solution for different applications. -
Lateral Hip Positioner
- Patient positioning device designed to assist the surgical team correctly position patient for hip surgery.
- Full stainless steel construction, with vinyl covered foam pads with integrated lateral end stops.
- Horizontal and vertical adjustment.
- Requires two size 16 clamps.
- Direct-on pads are included. Replacement pads can be found here: Lateral Hip Positioner Pads.
-
Curved Lateral Support, Non-Rotating
This product has multiple variants. The options may be chosen on the product page- 150mm horizontal slide.
- Will not pivot during surgery.
- Requires one clamp for mounting.
- Requires pad. Pad sold separately. Replacement pads can be found here: Curved Lateral Support Non-Rotating Pads.
-
Curved Support
This product has multiple variants. The options may be chosen on the product page- Requires one clamp for mounting.
- Requires pad. Pad sold separately. Replacement pads can be found here: Curved Support Pads.
-
Floor Mounted Door Closer
The Floor Mounted Double Action Door Closer can be used in conjunction with the double or single swing hinge. This door closer is a discrete solution that can be used in areas of high risk to minimise ligature points. This closer can be supplied with an optional mechanical hold back feature. When the door is opened to the required hold back point, it will latch in position and remain open until manually pulled, to disengage the hold back.This product has multiple variants. The options may be chosen on the product page
