May, 2023
Cart
You may be interested in…
-
Recessed Anti-Ligature Pull Handle
The Recessed Anti-Ligature Pull Handle is a compact option from the Primera pull handle range, measuring only 90mm x 106mm and constructed from 3mm solid steel. The '726' handle is suitable for a variety of applications, from cupboards to doors in units with challenging behaviour, due to its lack of protrusions. It meets the requirements of TS001 at level 4 and is available in Satin Stainless Steel electro-plated finish as a standard product, with other finishes available upon request. The handle is also supplied with pin torx anti-tamper fixing screws for added security. -
Single Swing Full Length Anti-Ligature Geared Securahinge
The Single Swing Full Length Anti-Ligature Geared Securahinge is a continuous hinge that is designed to reduce the risk of ligature and self-harm. It features a sloping cap and specially designed bearings, which removes the gap between the door leaf and frame that can be found in butt or piano-style hinges. It opens up to 180 degrees in one direction, making it suitable for applications where the door needs to fold back against the wall. The Securahinge can be installed with either the Floor Mounted Door Closer or the Concealed Door Closer. It can also be cut down to fit the length of the door. This hinge is tested to Level B4 TS001 Grade.This product has multiple variants. The options may be chosen on the product page -
Disposable Standard Armboard Pad
Manufactured in Australia from high-quality foam, these single use, non-sterile Standard Armboard Pads are the perfect option for busy environments, reducing the risk of cross contamination and avoiding the expense and time needed for cleaning. Supplied in a carton of 12 pairs of single use standard armboard pads, each pad measures 590mm (Length) x 190mm (Width) x 50mm (Height) and are designed to be used on a standard reusable table or positioning pads. As with all our disposable products, we can provide custom solutions to suit any need, please talk to us for further information. -
Gel Donut Head Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Slip In Side Support
- Mounts behind the side rail of the operating table.
- Requires pad, pad sold separately. Replacement pads can be found here: Slip in Side Support Pad.
-
Donut Head Ring
This product has multiple variants. The options may be chosen on the product page- Seamless vinyl coated foam head ring.
-
Orthopaedic Lightweight Leg Support
- Radiolucent carbon fibre construction.
- Designed to suit Amsco / Steris 777 orthopaedic traction frames.
- Requires pad, pad sold separately. Replacement pad can be found here: Orthopaedic Lightweight Leg Support Pads.
- Includes Cover. Replacement Covers can be found here: Orthopaedic Lightweight Leg Support Cover
-
Orthopaedic Sacral Rest
This product has multiple variants. The options may be chosen on the product page- Designed to suit Amsco/Steris and 777 orthopaedic traction frames.
- Radiolucent carbon fibre construction.
- Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Sacral Rest Pad.
-
Ophthalmic Head Section
This product has multiple variants. The options may be chosen on the product page- Provides clear access for seated surgeons.
- Attaches to table head section receptacles.
- Stainless steel and aluminium construction.
- Manufactured to suit most brand of operating tables.
- Requires pad, pad sold separately. Replacement pads can be found here: Ophthalmic Head Section Pad.
-
CLIK Load Release Towel Ring Holders
The CLIK Load Release Towel Ring Holders offer both style and durability in one product. This product can handle rough treatment while still maintaining its aesthetic appeal. Not only does it provide the expected convenience of a traditional towel ring, but it also has a unique safety feature. In the event of an attempted ligature, the bracket releases, and the towel ring drops away to prevent harm. It can be easily reinstated by pushing the towel ring holder back into the bracket. The bracket's heat-treated stainless-steel clip ensures repeated release and reattachment without compromising performance or safety. -
Tubular Body Support
- Simple vertical and horizontal adjustment.
- Requires one Size 34 Clamp for mounting
- Requires pad. Pad sold separately. Replacement pads can be found here: Tubular Body Support Pads.
-
Anaesthetic Screen Support Pad
- Replacement pad to suit Anaesthetic Screen Support
- Seamless vinyl covering.
-
Orthopaedic Popliteal Support
This product has multiple variants. The options may be chosen on the product page- To suit Amsco/Steris and 777 or Ortho Trax Orthopaedic Traction Frames.
- Size 35 post.
- Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Popliteal Support Pad.
-
Disposable Stacked Head Ring
Designed for use with standard reusable tables or positioning pads, the Hipac single use, non-sterile stacked head rings are manufactured in Australia from high quality foam materials. As single use items, they minimise the risk of cross contamination and avoid the time and expense of cleaning for rapid turnaround of equipment. Supplied in a carton of 12 single use attacked head rings, they are ideal for any medical facility. -
Airway Elevation Pillow
. Stackable design consisting of a base section and an optional additional top section for increased elevation. . Designed to assist with airway management in larger patients. . Provides stable patient positioning during surgery. . Requires Gel Contoured Head Pad or similar head support for correct positioning. . Will require height adjustable armboard such as the Elevating Rotational Armboard Long Bar Version. Measurements: Base: 750(L) x 500(W) x 130mm(H). Optional Top: 620(L) x 500(W) x 95mm(H). https://www.hipac.com.au/shop-product/head-supports/gel-contoured-head-pad https://www.hipac.com.au/shop-product/arm---hand-supports/elevating-rotational-armboard-long-bar-version -
Kestrel Load Release Mounting Plate
Kestrel Load Release Mounting Plate offers a simple and effective way to convert various items to anti-ligature status. These plates are available in three sizes and can be held vertically against the wall using the Kestrel brackets hidden behind them. The plates feature a sleek design that blends seamlessly into any environment. They are suitable for mounting products like soap dispensers, paper towel dispensers, and toilet roll holders, however, it is crucial to assess the potential risks associated with the product to ensure the safety of patients and staff.This product has multiple variants. The options may be chosen on the product page -
Disposable Popliteal/Tubular Pad
A single use, non-sterile pad that minimises any risk of cross contamination and the expense of cleaning, providing easier maintained, efficient workflows for busy theatres. Suitable for most popliteal and tubular supports, they are manufactured right here in Australia. Offered in a pack of 12 pads at 275mm (Length) x 140mm (Diameter), we can offer custom options on this product. As with all our disposable products, we can provide custom solutions to suit any need, please talk to us for further information. -
Kestrel Load Release Polycarbonate Towel Rail Set
The Kestrel Load Release Polycarbonate Towel Rail Set offers a unique safety feature that sets it apart from traditional towel rails. With magnetic brackets, it can release and drop away in the event of an attempted ligature, preventing harm. The clear polycarbonate tube also minimizes the risk of it being used as a weapon or to hide contraband. -
CLIK Load Release Toilet Roll Holder
The CLIK Load Release Toilet Roll Holder is a practical and safe solution for facilities with potential ligature risks. Its unique design offers the convenience of a traditional toilet roll holder while also ensuring safety. It features a bracket made of heat-treated stainless steel and a spring clip that can repeatedly release and reattach without compromising performance. This product prevents abnormal loads, such as attempted ligatures, from causing harm by allowing the holder to drop away and be easily reattached after the event. -
Resuscitation Trolley – Classic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 2x 125mm(D) Half Drawers Shelves: 50kg weight capacity per shelf Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -
Gel Horseshoe Head Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Double Swing Full Length Geared Hinge
The Double Swing Full Length Geared Hinge provides a practical solution for doors that require 90-degree swings in either direction. It is often paired with a detachable door stop to prevent barricading and allow the door to swing freely. Its continuous design eliminates the gaps between the door and frame, reducing ligature risks. This hinge is a durable alternative to pivots and can be cut to suit the door length. It can also be used with the floor-mounted door closer for a complete door security system. This hinge has passed Level B4 TS001 Grade testing.This product has multiple variants. The options may be chosen on the product page -
Bradbury Head Support
- Seamless vinyl coated head support.
-
Lithotomy Storage Cart
Provision for Short Back Section, Short Mid-Section Pad, Gas Assisted Stirrups and Lightweight Leg Support.- Accepts table leg section when Lithotomy kit is in use.
- Accessories shown in image are not included.
- Made to suit Skytron and Mizuho Operating Tables. Can be manufactured to suit most operating table attachments.
-
Healsafe Paper Towel Holder
The Healsafe Paper Towel Holder is designed with safety in mind. Its anti-ligature feature allows the dispenser to fall away from the proprietary mounting bracket if an abnormal load is applied. The dispenser can then be easily clicked back into place. The mounting bracket is secured to the wall using security fasteners. The dispenser is constructed with durable materials and has a sleek design to reduce the risk of injury to patients and staff.This product has multiple variants. The options may be chosen on the product page -
Flush Pull Handle, Rectangle
Rectangular Flush Pull Handle, with a satin stainless steel finish and measuring 120mm x 40mm, is held in place with concealed screws. This recessed handle is available in a variety of shapes to fit your specific facility requirements, including round, square, and rectangular. -
Elephants Trunk Pull Handle
The Elephants Trunk Pull Handle is a robust and solid cast product designed for applications where manual dexterity is a primary concern. Its sleek design provides a stylish alternative to the commonly known 'Witches Nose' handle. This handle comes in two back-plate options, the first being a flat plate for either new doors or retrofit applications, while the second is mounted on a recessed dish, providing more available space behind the handle but requiring more detailed door preparation prior to installation. Although not DHF TS001 compliant, it's suitable for applications where there is less challenging behaviour or installed with back-to-back bolt-through fixings. Its dimensions are 205mm x 90mm x 3mm, and it's tested to Level B4 TS001 Grade for anti-ligature purposes.This product has multiple variants. The options may be chosen on the product page -
Kestrel Soap Dish – White Plastic
The Kestrel Soap Dish in white plastic is a practical and secure choice for environments where there is a risk of self-harm. Its magnetic wall-mounted bracket is designed to release the soap dish in the event of an abnormal load, allowing it to drop away. Once the incident has passed, the dish can be quickly and easily reattached to the bracket. This product provides a straightforward and efficient solution to minimize the risk of harm in any setting. -
Hipac Orthopaedic Traction Boots
This product has multiple variants. The options may be chosen on the product page- Vinyl boots with hook and loop fastenings.
- Four straps for increased traction.
- Easy to clean vinyl construction.
- Sold in pairs.
- Can be manufactured to suit other traction frames.
-
Healsafe Shelf Set
The Healsafe Shelf Set is an anti-ligature solution that includes a sturdy shelf and a unique mounting bracket that can withstand abnormal loads. The bracket is secured to the wall with security fasteners, and the shelf is designed to detach from the bracket under abnormal pressure, preventing ligature incidents. The shelf is made of durable plastic with smooth edges, reducing the risk of injury to patients or staff. After an incident, the shelf can be easily reattached to the bracket by clicking it back into place. -
Removable Door Stop, Aluminium
The Aluminium Removable Door Stop provides an effective solution to prevent barricade attempts in combination with a double swing hinge. While the door is in normal use, the stop stays locked to the door frame and acts as a traditional stop to prevent the door from swinging outward. In the case of a barricade, the stop can be unlatched from the frame using a key and opened outward to enable the door to swing away from the obstruction. Available in right or left-handed configuration, the door stop comes in 2100mm and 2400mm lengths and requires a 4mm key. This door stop is rigorously tested to Level B4 TS001 Grade.This product has multiple variants. The options may be chosen on the product page -
Anaesthetic Pillow
- Vinyl covered with chemically sealed seams.
-
CLIK Load Release Corner Shelf
The CLIK Load Release Corner Shelf is designed to release when an abnormal load is applied, like an attempted ligature, causing the shelf to drop away and preventing a successful ligature. The shelf can easily be reattached by pushing it back into the corresponding brackets. The brackets feature heat-treated stainless steel spring clips, allowing the product to release and reattach repeatedly without compromising performance or safety. The shelf is made of 8mm polycarbonate with chamfered edges and rounded corners, making it sturdy and safe for use. -
Linen Trolley
Australian Made 304 Grade Stainless Steel Trolley. Measurements: 950mm(L) x 800mm(W) x 1200mm(H). Bottom Shelf: 50kg weight capacity. Castors: 4x 125mm Non-Locking Castors. -
Wide Lateral Support Pads
This product has multiple variants. The options may be chosen on the product page- Made to suit Wide Lateral Support.
- Two pad types available: flat or curved.
- Seamless vinyl-covered foam.
-
Anti-Ligature Coat & Towel Hook
The Anti-Ligature Coat and Towel Hook is designed with safety in mind. The hook component is made of durable rubber and securely fixed in a stainless steel collar with two security screws. It has a low load release threshold to prevent ligature and is flexible in all directions, making it a safe choice for door use. The collar's chamfered design adds to its safety features. -
Straight Lateral Support Pads
This product has multiple variants. The options may be chosen on the product page- Replacement pad made to suit Straight Lateral Support and Straight Lateral Support, Short Plate.
- Vinyl-covered foam.
-
Horseshoe Head Rest
- Seamless vinyl covered foam with solid base and indentation for neck.
-
Curved Lateral Support Pad
- Replacement pad made to suit Curved Lateral Support, Curved Support and Curved Support Non-Rotating.
- Vinyl-covered foam.
-
One Drawer Instrument Trolley
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Size Options: 490mm(L) x 490mm(W) x 900mm(H) 600mm(L) x 490mm(W) x 900mm(H) 750mm(L) x 490mm(W) x 900mm(H) 900mm(L) x 490mm(W) x 900mm(H) Castors: 2x 75mm Non-Locking Castors on back 2x 75mm Locking Castors on front Drawer Dimensions: 1 x 125mm(D). Shelves: 50kg weight capacity per shelf. Available Accessories: Drawer dividers Drawer linersThis product has multiple variants. The options may be chosen on the product page -
Anaesthetic Screen Support
- Stainless steel construction.
- Requires one size 16 clamps for mounting.
- Requires pad which is sold separately. Replacement pads can be found here: Anaesthetic Screen Support Pad.
-
Urology Drain Pan
- Can be manufactured for most makes and models of tables
- Tray strainer and hose included
-
Single Linen Skip No Lid
Hipac linen skips are designed for the collection and handling of soiled or used linen. They are fully mobile, with 75mm swivel castors, and feature a robust, lightweight construction frame to suit a standard dry used linen bag. Feel free to reach out to us and explore the options we offer for customising and creating unique products to meet your specific requirements. Measurements: Dimensions: 380mm(L) x 540mm(W) x 850mm(H). -
Concealed Door Closer
The requirements of anti-ligature installations and those of door closers invariably contradict each other. The necessity of a linkage between the door and the frame always creates a ligature point when the door is open. One of the best compromises is the Perko Powermatic concealed door closer. Operating at power size 3, with adjustable closing and latching speeds, this unit has a concealed jam mounted configuration making it a less obvious ligature risk. While a ligature risk will always be present with this model of door closer, it can be minimised by installing it at as little as 300mm above floor level. -
Moulded Heavy Duty Door Stop
The Moulded Heavy Duty Door Stop is constructed from a durable rubber material that can withstand heavy impact. It is designed to restrict the opening angle of the door or prevent the door from hitting the wall. This doorstop is resistant to vandalism and patient tampering and is flame resistant. It can be mounted on the floor or wall, making it a versatile solution for different applications. -
Flush Pull Handle, Round
The Flush Pull Handle in a 40mm round shape, is designed to be recessed for a sleek finish. Made of high-quality satin stainless steel with concealed screws, this handle is both durable and visually appealing. Choose from various shapes including the square and rectangle to fit the specific requirements of your facility. -
Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -
Prone Anaesthetic Pillow
- Designed to provide support for prone positioning, allowing for safe positioning of intubated patients.
- Twin layered foam with soft vinyl cover.
-
Emergency Pull Handle
The Emergency Pull Handle is a vital accessory in any healthcare facility with anti-barricade doors. It provides additional grip to overcome any internal force generated by a patient holding the handle from the inside of the door, preventing clinical staff access. By sliding the Emergency Pull Handle over the pinch grip handle, the door can be opened outwardly by pulling it. The length of the handle is designed to allow multiple staff members to participate in pulling the door, ensuring swift entry to the barricaded room. The Emergency Pull Handle is compatible only with 729 handles. -
Triple Linen Skip With Foot-Operated Lid
Hipac linen skips are designed for the collection and handling of soiled or used linen. They are fully mobile, with 75mm swivel castors, and feature a robust, lightweight construction frame to suit a standard dry used linen bag. Includes lightweight plastic foot-operated lids. Feel free to reach out to us and explore the options we offer for customising and creating unique products to meet your specific requirements. Measurements: Dimensions: 1170mm(L) x 540mm(W) x 850mm(H) Safe Working Load: 120kg Product Weight: 19.35kg -
Slip In Arm Support Pad
- Replacement Pad to suit Slip In Arm Support
-
Triple Linen Skip, No Lid
Hipac Linen Skips are designed for the collection and handling of soiled or used linen. They are fully mobile, with 75mm swivel castors, and feature a robust, lightweight construction frame to suit a standard dry used linen bag. Feel free to reach out to us and explore the options we offer for customising and creating unique products to meet your specific requirements. Measurements: Dimensions: 1170mm(L) x 540mm(W) x 850mm(H) Safe Working Load: 120kg Product Weight: 15.69kg. -
Orthopaedic Hip Rest
• Designed to suit Amsco/Steris and 777 orthopaedic traction frames. • Radiolucent carbon fibre construction. • Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Hip Rest -
Kestrel Coat Hook
The Kestrel coat hook offers the expected functionality of a traditional hook with added safety features. The magnetic bracket releases the hook if an abnormal load, such as an attempted ligature, is applied, removing any ligature points. The hook is made of pliable material, rendering it ineffective for self-harm or as a weapon. After the event, the hook can be reattached to the magnetic bracket for continued use. -
-
Double Linen Skip, No Lid
Hipac linen skips are designed for the collection and handling of soiled or used linen. They are fully mobile, with 75mm swivel castors, and feature a robust, lightweight construction frame to suit a standard dry used linen bag. Feel free to reach out to us and explore the options we offer for customising and creating unique products to meet your specific requirements. Measurements: Dimensions: 780mm(L) x 540mm(W) x 850mm(H) Safe Working Load: 80kg Product Weight: 10.46kg -
Disposable Heel Cup
An effective patient positioner that minimises the risk of cross contamination and avoids the expense and time of cleaning, the Hipac single use heel cup is non-sterile and perfect for high traffic environments. Made in Australia, they should be used with a standard reusable table or positioning pads and are offered in cartons of 24 pairs of single use heel cups. As with all our disposable products, we can provide custom solutions to suit any need, please talk to us for further information. -
Urology Bracket Set
This product has multiple variants. The options may be chosen on the product page- Drain system that fixes to the operating table via the side rails.
- Requires disposable pouch.
-
CLIK Load Release Semi Circular Shelf
The Clik Load Release Semi-Circular Shelf is a convenient solution that is designed to prevent ligature risks. When abnormal loads are applied, such as attempted ligatures, the brackets are specifically designed to release the shelf to drop away, preventing a successful ligature. Once the event has passed, the shelf can be reattached by simply pushing it back into the corresponding brackets. The brackets feature heat-treated stainless steel spring clips that allow the product to release and reattach repeatedly without any decline in safety or performance. Made from 8mm polycarbonate with chamfered edges and rounded corners, this shelf is a reliable and safe addition to any mental health facility.
