“Dome Wall Stop” has been added to your cart. View cart
You may be interested in…
-

Concealed Door Closer
The requirements of anti-ligature installations and those of door closers invariably contradict each other. The necessity of a linkage between the door and the frame always creates a ligature point when the door is open. One of the best compromises is the Perko Powermatic concealed door closer. Operating at power size 3, with adjustable closing and latching speeds, this unit has a concealed jam mounted configuration making it a less obvious ligature risk. While a ligature risk will always be present with this model of door closer, it can be minimised by installing it at as little as 300mm above floor level. -



Single Swing Full Length Anti-Ligature Geared Securahinge
The Single Swing Full Length Anti-Ligature Geared Securahinge is a continuous hinge that is designed to reduce the risk of ligature and self-harm. It features a sloping cap and specially designed bearings, which removes the gap between the door leaf and frame that can be found in butt or piano-style hinges. It opens up to 180 degrees in one direction, making it suitable for applications where the door needs to fold back against the wall. The Securahinge can be installed with either the Floor Mounted Door Closer or the Concealed Door Closer. It can also be cut down to fit the length of the door. This hinge is tested to Level B4 TS001 Grade.This product has multiple variants. The options may be chosen on the product page -



Removable Door Stop, Aluminium
The Aluminium Removable Door Stop provides an effective solution to prevent barricade attempts in combination with a double swing hinge. While the door is in normal use, the stop stays locked to the door frame and acts as a traditional stop to prevent the door from swinging outward. In the case of a barricade, the stop can be unlatched from the frame using a key and opened outward to enable the door to swing away from the obstruction. Available in right or left-handed configuration, the door stop comes in 2100mm and 2400mm lengths and requires a 4mm key. This door stop is rigorously tested to Level B4 TS001 Grade.This product has multiple variants. The options may be chosen on the product page -



Disposable Patient Care Kit to suit Wilson Frame
A complete, single-use patient care kit designed for use with the Wilson Table. Manufactured in Australia, they minimise the risk of cross-contamination and avoid extensive cleaning. The kit includes a full positioning kit, including:This product has multiple variants. The options may be chosen on the product page- Arm Cradles
- Anaesthetic Head Pillow
- Pad Sleeves
- Transverse Bar Pad
- Base Cover Drape
-



-



Vacuform Non Slip Foil
The secret of perfected adaption to the body by VACUFORM surgical mattresses is microballs of styrofoam, which are stabilised by vacuum to give a lasting, completely supportive form. Reducing the diameter of the filter balls by a fifth enables more precise adaption of the surgical mattress to the body. The MicroSpace system significantly increases the feeling of physical comfort for the patient compared to conventional fillings. Particularly during time-consuming operations or with patients who are older and in poor condition, there is a risk of pressure points leading to acute decubital ulcers and paresis (paralysis from nerve damage). The individual, ergonomic body adaptation of VACUFORM surgical mattresses effectively prevents such damage. The support pressure of the patient is optimally distributed over the whole body and thus reduced to a minimum. The microcirculation needed by the skin is unaffected. The patient has a noticeable feeling of comfort, lightness and warmth.This product has multiple variants. The options may be chosen on the product page- Prevents Vacuform mattress slipping in extreme angles.
- Easy to clean and reusable.
- Available as a roll, or a single piece.
- To be used underneath the Vacuform Bean Bags.
-



Disposable Patient Care Kit to suit Jackson Table
A complete, single use patient care kit designed for use with the Jackson Table. Manufactured in Australia, they minimise the risk of cross contamination and avoid extensive cleaning.This product has multiple variants. The options may be chosen on the product page -



Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -



Moulded Heavy Duty Door Stop
The Moulded Heavy Duty Door Stop is constructed from a durable rubber material that can withstand heavy impact. It is designed to restrict the opening angle of the door or prevent the door from hitting the wall. This doorstop is resistant to vandalism and patient tampering and is flame resistant. It can be mounted on the floor or wall, making it a versatile solution for different applications. -



Double Swing Full Length Geared Hinge
The Double Swing Full Length Geared Hinge provides a practical solution for doors that require 90-degree swings in either direction. It is often paired with a detachable door stop to prevent barricading and allow the door to swing freely. Its continuous design eliminates the gaps between the door and frame, reducing ligature risks. This hinge is a durable alternative to pivots and can be cut to suit the door length. It can also be used with the floor-mounted door closer for a complete door security system. This hinge has passed Level B4 TS001 Grade testing.This product has multiple variants. The options may be chosen on the product page -



Side Rail Kit
This product has multiple variants. The options may be chosen on the product page- Designed to suit Skytron 3600, 3500 and 6700 Series operating tables.
- Available for other table models. Contact us with your specific requirements.
