May, 2023
Cart
You may be interested in…
-
Single Swing Full Length Anti-Ligature Geared Securahinge
The Single Swing Full Length Anti-Ligature Geared Securahinge is a continuous hinge that is designed to reduce the risk of ligature and self-harm. It features a sloping cap and specially designed bearings, which removes the gap between the door leaf and frame that can be found in butt or piano-style hinges. It opens up to 180 degrees in one direction, making it suitable for applications where the door needs to fold back against the wall. The Securahinge can be installed with either the Floor Mounted Door Closer or the Concealed Door Closer. It can also be cut down to fit the length of the door. This hinge is tested to Level B4 TS001 Grade.This product has multiple variants. The options may be chosen on the product page -
Anaesthetic Pillow
- Vinyl covered with chemically sealed seams.
-
Moulded Heavy Duty Door Stop
The Moulded Heavy Duty Door Stop is constructed from a durable rubber material that can withstand heavy impact. It is designed to restrict the opening angle of the door or prevent the door from hitting the wall. This doorstop is resistant to vandalism and patient tampering and is flame resistant. It can be mounted on the floor or wall, making it a versatile solution for different applications. -
Concealed Door Closer
The requirements of anti-ligature installations and those of door closers invariably contradict each other. The necessity of a linkage between the door and the frame always creates a ligature point when the door is open. One of the best compromises is the Perko Powermatic concealed door closer. Operating at power size 3, with adjustable closing and latching speeds, this unit has a concealed jam mounted configuration making it a less obvious ligature risk. While a ligature risk will always be present with this model of door closer, it can be minimised by installing it at as little as 300mm above floor level. -
Removable Door Stop, Aluminium
The Aluminium Removable Door Stop provides an effective solution to prevent barricade attempts in combination with a double swing hinge. While the door is in normal use, the stop stays locked to the door frame and acts as a traditional stop to prevent the door from swinging outward. In the case of a barricade, the stop can be unlatched from the frame using a key and opened outward to enable the door to swing away from the obstruction. Available in right or left-handed configuration, the door stop comes in 2100mm and 2400mm lengths and requires a 4mm key. This door stop is rigorously tested to Level B4 TS001 Grade.This product has multiple variants. The options may be chosen on the product page -
Prone Anaesthetic Pillow
- Designed to provide support for prone positioning, allowing for safe positioning of intubated patients.
- Twin layered foam with soft vinyl cover.
-
Double Swing Full Length Geared Hinge
The Double Swing Full Length Geared Hinge provides a practical solution for doors that require 90-degree swings in either direction. It is often paired with a detachable door stop to prevent barricading and allow the door to swing freely. Its continuous design eliminates the gaps between the door and frame, reducing ligature risks. This hinge is a durable alternative to pivots and can be cut to suit the door length. It can also be used with the floor-mounted door closer for a complete door security system. This hinge has passed Level B4 TS001 Grade testing.This product has multiple variants. The options may be chosen on the product page -
Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -
Universal Bar Clamps
Operating theatre tables are fitted with side rails to which positioning equipment is attached. These rails range in size according to their make and origin. In order to achieve stable positioning, the correct sized clamp must be used.This product has multiple variants. The options may be chosen on the product page- Accepts most brands of gas assisted stirrups.
- Accepts up to size 17 round post.
- Accepts size 33 and 34 rectangular bar.
- Lightweight aluminium construction.
- Clamps to suit A size rails are direct-on where slots are fitted in side rail.
-
Form-A-Screen
- Flexible anaesthetic screen, shapes into any configuration.
- Requires two size 16 clamps for mounting.
