“Foam Laminectomy Rest” has been added to your cart. View cart
You may be interested in…
-

Adjustable Mayfield Adaptor
- Adaptor to attach Mayfield head frame to operating table.
- Slides over side rails.
- Locks securely in place with wrist screws.
-



Stirrup Clamps
Operating theatre tables are fitted with side rails to which positioning equipment is attached. These rails range in size according to their make and origin. In order to achieve stable positioning, the correct sized clamp must be used.This product has multiple variants. The options may be chosen on the product page- Suits most brands of gas assisted stirrups.
- Accepts size 33 regtangular post.
- Aluminium construction.
- Clamps to suit A Size Rails are direct-on where slots are fitted in side rail.
- Clamps to suit stirrups include, but are not limited to, sirrups with the following boot colours; red, yellow, pink, blue, grey, black, white and purple.
-



Elevating Rotational Armboard
- One hand operated ball joint lock release.
- Limitless rotational capability.
- Ball joint of 38 degrees in any direction.
- Requires pad, pad sold separately. Replacement pads can be found here: Elevating Rotational Armboard Pad.
- Requires one size 17 radial clamp for mounting. We recommend using the Lock Lever, Radial, Direct On Clamp.
-



Two Piece Laminectomy Rest
- Vinyl covered positioning device.
- Contoured support, shaped to assist in prone patient positioning.
- Vinyl covered foam.
- All seams chemically sealed.
-



Lateral Hip Positioner Replacement Pads
This product has multiple variants. The options may be chosen on the product page- Replacement Pad Assembly to suit Lateral Hip Positioner.
- Latex-free.
-



Lift Assisted Leg Holders / Stirrups
- 270kg patient weight capacity.
- Gas lift assisted stirrups.
- 120 degrees boot rotation.
- Handle controlled abduction and adduction.
- Pad set included. Replacement pads can be found here: Stirrup Replacement Pads.
- Requires two size 33 clamps for mounting. We recommend using the Stirrup Clamp.
-



Surgical Table Arm Guard Pad
Replacement Pad in Vinyl to suit Surgical Table Arm Guard Hipac also offers a Gel Arm And Leg Toboggan Pad Measurements: 200 (H) x 400 (W) x 15mm (D) -



Pelvic Tilt Seat Pad
This product has multiple variants. The options may be chosen on the product page- Replacement Pad to suit Pelvic Tilt Seat.
- Comfort Series.
-



Gel Donut Head Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Curved Lateral Support Pad
- Replacement pad made to suit Curved Lateral Support, Curved Support and Curved Support Non-Rotating.
- Vinyl-covered foam.
-



Moulded Heavy Duty Door Stop
The Moulded Heavy Duty Door Stop is constructed from a durable rubber material that can withstand heavy impact. It is designed to restrict the opening angle of the door or prevent the door from hitting the wall. This doorstop is resistant to vandalism and patient tampering and is flame resistant. It can be mounted on the floor or wall, making it a versatile solution for different applications. -



Door Top Alarm
The Door Top Alarm (DTA) is an innovative technology that provides hardware integration into the top of timber doors to alert staff of possible ligature attempts. The discreet sensor installed across the door leaf detects the application of weight from ligature attempts or objects jammed between the door and frame. To avoid false alarms, it has an adjustable time delay of 5 to 30 seconds, triggering only with sustained applied weight. Compatible with most duress and staff attack systems, the DTA sends signals to alert the clinical team via audible alarms, staff indicator panels, pagers, handsets or the main nurse station computer.This product has multiple variants. The options may be chosen on the product page -



-



Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -



Gel Pad to suit Wilson Frame
- Sold individually.
- Latex & Silicone Free.
- Anti-Bacterial & Anti-Microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aids in Pressure Redistribution.
-



Gel Concave Armboard Pad
This product has multiple variants. The options may be chosen on the product page- Contoured for multi direction support.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Prone Arm Support Pad
This product has multiple variants. The options may be chosen on the product page- Replacement Pad to suit Prone Arm Support
- Sold individually.
-



Auto Locking Night Latch
The Auto Locking Night Latch is a highly secure and convenient lockcase designed to provide superior protection. Made primarily from durable steel, it offers unparalleled strength and durability. The 6 Lobe Pin-Torx anti-tamper stainless steel security screws further enhance its tamper-proof features.This product has multiple variants. The options may be chosen on the product page -



Orthopaedic Hip Rest
• Designed to suit Amsco/Steris and 777 orthopaedic traction frames. • Radiolucent carbon fibre construction. • Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Hip Rest -



Removable Door Stop, Aluminium
The Aluminium Removable Door Stop provides an effective solution to prevent barricade attempts in combination with a double swing hinge. While the door is in normal use, the stop stays locked to the door frame and acts as a traditional stop to prevent the door from swinging outward. In the case of a barricade, the stop can be unlatched from the frame using a key and opened outward to enable the door to swing away from the obstruction. Available in right or left-handed configuration, the door stop comes in 2100mm and 2400mm lengths and requires a 4mm key. This door stop is rigorously tested to Level B4 TS001 Grade.This product has multiple variants. The options may be chosen on the product page -



Stacking Interlocking Step Stools
Australian-made stackable 304 grade stainless steel step stools are designed to interlock with each other. Choose between rubber or aluminium tops. Available as single units or sets of 4. Replacement rubber feet are available. Measurements: Top: 453(L) x 302mm(W) Bottom: 493(L) x 342mm(W) Height: 120mmThis product has multiple variants. The options may be chosen on the product page -



Femoral / Popliteal Board Pad
- Replacement Pad to suit Femoral/Popliteal Board for Steris 3080/3085 Operating Theatre Tables.
-



Lithotomy Storage Cart
Provision for Short Back Section, Short Mid-Section Pad, Gas Assisted Stirrups and Lightweight Leg Support.- Accepts table leg section when Lithotomy kit is in use.
- Accessories shown in image are not included.
- Made to suit Skytron and Mizuho Operating Tables. Can be manufactured to suit most operating table attachments.
-



Debello Lateral Hip Positioner Set
The Debello Lateral Hip Positioner is a patient positioning device that assists the surgical team in correctly positioning patients for hip surgery while providing improved access around the patient and operative site. This is achieved by the ability to reduce the length of the lateral bars for larger patients without limiting the use of the device to support smaller patients. The support incorporates three seamless, vinyl-covered foam pads designed to provide a reduced risk of pressure injury when compared with traditional hip positioning pads.- Assists the surgical team in correctly positioning the patient for hip surgery.
- Improves access around the patient and operative site.
- Integrated lateral end stops.
- Pads are included. Replacement seamless vinyl-covered foam pads are available, reducing the risk of pressure injuries: Debello Lateral Hip Positioner Pads.
- Horizontal and vertical adjustment.
- Requires two size 16 clamps for mounting.
- Pole length 450mm (can be shortened by 200mm).
-



Prone Anaesthetic Pillow
- Designed to provide support for prone positioning, allowing for safe positioning of intubated patients.
- Twin layered foam with soft vinyl cover.
-



Unaffected Leg Holder
- To suit Amsco/Steris and 777 Orthopaedic Traction Frames.
- Requires pad, pad sold separately. Replacement pads can be found here: Unaffected Leg Holder Pad.
-



Vacuform Non Slip Foil
The secret of perfected adaption to the body by VACUFORM surgical mattresses is microballs of styrofoam, which are stabilised by vacuum to give a lasting, completely supportive form. Reducing the diameter of the filter balls by a fifth enables more precise adaption of the surgical mattress to the body. The MicroSpace system significantly increases the feeling of physical comfort for the patient compared to conventional fillings. Particularly during time-consuming operations or with patients who are older and in poor condition, there is a risk of pressure points leading to acute decubital ulcers and paresis (paralysis from nerve damage). The individual, ergonomic body adaptation of VACUFORM surgical mattresses effectively prevents such damage. The support pressure of the patient is optimally distributed over the whole body and thus reduced to a minimum. The microcirculation needed by the skin is unaffected. The patient has a noticeable feeling of comfort, lightness and warmth.This product has multiple variants. The options may be chosen on the product page- Prevents Vacuform mattress slipping in extreme angles.
- Easy to clean and reusable.
- Available as a roll, or a single piece.
- To be used underneath the Vacuform Bean Bags.
-



Gel Ulnar/Brachial Protector
- Protects the forearm, wraps around the patients arm and secures with hook and loop.
- Helps to prevent ulnar nerve damage when patient's arms are tucked to their sides.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Single Swing Full Length Anti-Ligature Geared Securahinge
The Single Swing Full Length Anti-Ligature Geared Securahinge is a continuous hinge that is designed to reduce the risk of ligature and self-harm. It features a sloping cap and specially designed bearings, which removes the gap between the door leaf and frame that can be found in butt or piano-style hinges. It opens up to 180 degrees in one direction, making it suitable for applications where the door needs to fold back against the wall. The Securahinge can be installed with either the Floor Mounted Door Closer or the Concealed Door Closer. It can also be cut down to fit the length of the door. This hinge is tested to Level B4 TS001 Grade.This product has multiple variants. The options may be chosen on the product page -



Gel Lateral Positioner
- Consists of a vinyl covered foam support with removable gel sheet.
- Protects arm and shoulder in lateral positioning.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Adjustable Shoulder Rests
This product has multiple variants. The options may be chosen on the product page- Set of shoulder rests designed to prevent patient slide when in Trendelenburg.
- Seamless direct-on pads included. Replacement pads can be found here: Adjustable Shoulder Rest Pads.
- Requires two clamps for mounting.
-



-



One Drawer Instrument Trolley
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Size Options: 490mm(L) x 490mm(W) x 900mm(H) 600mm(L) x 490mm(W) x 900mm(H) 750mm(L) x 490mm(W) x 900mm(H) 900mm(L) x 490mm(W) x 900mm(H) Castors: 2x 75mm Non-Locking Castors on back 2x 75mm Locking Castors on front Drawer Dimensions: 1 x 125mm(D). Shelves: 50kg weight capacity per shelf. Available Accessories: Drawer dividers Drawer linersThis product has multiple variants. The options may be chosen on the product page -



Heavy Duty Lift Assisted Leg Holders / Stirrups
- 360kg patient weight capacity.
- Gas lift assisted stirrups.
- 120 degree boot rotation.
- Handle controlled abduction and adduction.
- Pad set included. Replacement pads can be found here: Stirrup Replacement Pads.
- Requires two size 33 clamps for mounting. We recommend using the Stirrup Clamp.
-



Gillespie Pillow
- Vinyl-covered foam positioning device.
- Contoured support, shaped to assist in prone patient positioning.
- All seams are chemically sealed.
-



Gel Knee Crutch Pad
This product has multiple variants. The options may be chosen on the product page- Used to support leg on Knee Crutch, Lloyd Davies and Unaffected Leg Holders.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Universal Bar Clamps
Operating theatre tables are fitted with side rails to which positioning equipment is attached. These rails range in size according to their make and origin. In order to achieve stable positioning, the correct sized clamp must be used.This product has multiple variants. The options may be chosen on the product page- Accepts most brands of gas assisted stirrups.
- Accepts up to size 17 round post.
- Accepts size 33 and 34 rectangular bar.
- Lightweight aluminium construction.
- Clamps to suit A size rails are direct-on where slots are fitted in side rail.
-



Urology Bracket Set
This product has multiple variants. The options may be chosen on the product page- Drain system that fixes to the operating table via the side rails.
- Requires disposable pouch.
-



Table Width Extension Pads
This product has multiple variants. The options may be chosen on the product page- Replacement Pads to suit Direct-On Table Width Extension.
- Pads sold individually.
-



Disposable Patient Care Kit to suit Jackson Table
A complete, single use patient care kit designed for use with the Jackson Table. Manufactured in Australia, they minimise the risk of cross contamination and avoid extensive cleaning.This product has multiple variants. The options may be chosen on the product page -



Narrow Rotatable Lateral Support
- Vertical, horizontal and rotational adjustment.
- Can be used as shoulder rests when purchased as a pair.
- Size 17 vertical post.
- Requires one Size 17 Clamp for mounting.
- Requires Pad. Sold separately. Replacement Pads can be found here: Narrow Rotatable Lateral Support Pads.
-



Floor Mounted Door Closer
The Floor Mounted Double Action Door Closer can be used in conjunction with the double or single swing hinge. This door closer is a discrete solution that can be used in areas of high risk to minimise ligature points. This closer can be supplied with an optional mechanical hold back feature. When the door is opened to the required hold back point, it will latch in position and remain open until manually pulled, to disengage the hold back.This product has multiple variants. The options may be chosen on the product page -



Wide Lateral Support Pads
This product has multiple variants. The options may be chosen on the product page- Made to suit Wide Lateral Support.
- Two pad types available: flat or curved.
- Seamless vinyl-covered foam.
-



Popliteal Support
This product has multiple variants. The options may be chosen on the product page<ul><li>Standard supports are stainless steel. Radiolucent options are available.</li><li>Requires one clamp for mounting.</li><li>Requires pad, pad sold separately. Replacement pads can be found here: Popliteal Support Pad.</li></ul> -



Resuscitation Trolley – Classic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 2x 125mm(D) Half Drawers Shelves: 50kg weight capacity per shelf Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -



Side Rail Kit
This product has multiple variants. The options may be chosen on the product page- Designed to suit Skytron 3600, 3500 and 6700 Series operating tables.
- Available for other table models. Contact us with your specific requirements.
-



Rotatable Shoulder Rests
- Set of shoulder rests designed to prevent patient slide when in Trendelenburg.
- Curved and flat pads are included. Replacement pads can be found here: Rotatable Shoulder Rest Pads.
- Requires two Size 17 clamps for mounting.
-



Anti-Ligature Escutcheons
The Anti-Ligature Escutcheons by Hipac feature a chamfered edge design that prevents the attachment of a ligature to the keyway, ensuring patient safety. The escutcheons are available in Euro and Oval profiles, making them compatible with most cylinder types. These anti-ligature products have passed the highest level of DHF TS001 testing, achieving a Grade A4 rating.This product has multiple variants. The options may be chosen on the product page -



Urology Drain Pan
- Can be manufactured for most makes and models of tables
- Tray strainer and hose included
-



Foot Rest Pad
This product has multiple variants. The options may be chosen on the product page- Replacement Pad to suit Foot Rest.
- Hooks and loop attachment.
- Custom options available. Contact us with your specific requirements.
-



Knee Arthroscopy Holder
- Holds thigh in a stable position with clamping action.
- Adjusted with winding handle from the side of the operating table.
- Requires pad set, pad set sold separately. Replacement pads can be found here: Knee Arthroscopy Holder Pads.
- Requires one clamp for mounting.
-



Mayfield Adaptor
- Adaptor to attach Mayfield Head Frame to 3500, 3600, 6700 and 5801 Series Operating Tables.
- Slides into head or leg receptacles.
- Can be manufactured to suit most makes/models of operating tables. Contact us with your specific requirements.
-



Anaesthetic Screen Support
- Stainless steel construction.
- Requires one size 16 clamps for mounting.
- Requires pad which is sold separately. Replacement pads can be found here: Anaesthetic Screen Support Pad.
-



Disposable Patient Care Kit to suit Wilson Frame
A complete, single-use patient care kit designed for use with the Wilson Table. Manufactured in Australia, they minimise the risk of cross-contamination and avoid extensive cleaning. The kit includes a full positioning kit, including:This product has multiple variants. The options may be chosen on the product page- Arm Cradles
- Anaesthetic Head Pillow
- Pad Sleeves
- Transverse Bar Pad
- Base Cover Drape
