May, 2023
Cart
You may be interested in…
-
Recessed Anti-Ligature Pull Handle
The Recessed Anti-Ligature Pull Handle is a compact option from the Primera pull handle range, measuring only 90mm x 106mm and constructed from 3mm solid steel. The '726' handle is suitable for a variety of applications, from cupboards to doors in units with challenging behaviour, due to its lack of protrusions. It meets the requirements of TS001 at level 4 and is available in Satin Stainless Steel electro-plated finish as a standard product, with other finishes available upon request. The handle is also supplied with pin torx anti-tamper fixing screws for added security. -
Clamp on Rail
This product has multiple variants. The options may be chosen on the product page- Clamp on rail to suit Carbon Fibre Imaging Board.
- Adds 200mm of rail to allow for accessories to be attached to assist in safe and correct patient positioning.
-
Universal Bar Clamps
Operating theatre tables are fitted with side rails to which positioning equipment is attached. These rails range in size according to their make and origin. In order to achieve stable positioning, the correct sized clamp must be used.This product has multiple variants. The options may be chosen on the product page- Accepts most brands of gas assisted stirrups.
- Accepts up to size 17 round post.
- Accepts size 33 and 34 rectangular bar.
- Lightweight aluminium construction.
- Clamps to suit A size rails are direct-on where slots are fitted in side rail.
-
Kick Bucket Stand
Hipac's Stainless Steel Kick Bucket Stand is Australian-made and built to last. We offer the complete solution with the bucket and lid, providing you with added convenience. (sold separately) Feel free to reach out to us and explore the options we offer for customising and creating unique products to meet your specific requirements. -
Single Swing Full Length Anti-Ligature Geared Securahinge
The Single Swing Full Length Anti-Ligature Geared Securahinge is a continuous hinge that is designed to reduce the risk of ligature and self-harm. It features a sloping cap and specially designed bearings, which removes the gap between the door leaf and frame that can be found in butt or piano-style hinges. It opens up to 180 degrees in one direction, making it suitable for applications where the door needs to fold back against the wall. The Securahinge can be installed with either the Floor Mounted Door Closer or the Concealed Door Closer. It can also be cut down to fit the length of the door. This hinge is tested to Level B4 TS001 Grade.This product has multiple variants. The options may be chosen on the product page -
Double Swing Full Length Geared Hinge
The Double Swing Full Length Geared Hinge provides a practical solution for doors that require 90-degree swings in either direction. It is often paired with a detachable door stop to prevent barricading and allow the door to swing freely. Its continuous design eliminates the gaps between the door and frame, reducing ligature risks. This hinge is a durable alternative to pivots and can be cut to suit the door length. It can also be used with the floor-mounted door closer for a complete door security system. This hinge has passed Level B4 TS001 Grade testing.This product has multiple variants. The options may be chosen on the product page -
Urology Bracket Set
This product has multiple variants. The options may be chosen on the product page- Drain system that fixes to the operating table via the side rails.
- Requires disposable pouch.
-
Lightweight Leg Support
This product has multiple variants. The options may be chosen on the product page<ul><li>Designed to support the patients legs during transfer in and out of stirrups.</li><li>Manufactured to suit most tables, with options that slide over rails or insert into leg receptacles.</li><li>Weighs less than 5kg.</li><li>Includes replaceable vinyl cover. Replacement covers can be found here: <a href="https://staging.hipac.com.au/surgical-products/operating-theatre-tables-and-accessories/operating-table-accessories/replacement-pads/orthopaedic-lightweight-leg-support-pads-and-covers-2/">Lightweight Leg Support Pad</a>.</li><li>Custom Lightweight Leg Supports available. <a href="https://staging.hipac.com.au/contact-us/">Contact us</a> with your specific requirements.</li></ul> -
Lift Assisted Leg Holders / Stirrups
- 270kg patient weight capacity.
- Gas lift assisted stirrups.
- 120 degrees boot rotation.
- Handle controlled abduction and adduction.
- Pad set included. Replacement pads can be found here: Stirrup Replacement Pads.
- Requires two size 33 clamps for mounting. We recommend using the Stirrup Clamp.
-
Surgical Arm Table
- Radiolucent top.
- Height adjustable telescopic leg provides additional support.
- Requires two size 16 clamp for mounting.
- Requires pad, pad sold separately. Replacement pads can be found here: Surgical Arm Table Pad.
-
Disposable Standard Armboard Pad
Manufactured in Australia from high-quality foam, these single use, non-sterile Standard Armboard Pads are the perfect option for busy environments, reducing the risk of cross contamination and avoiding the expense and time needed for cleaning. Supplied in a carton of 12 pairs of single use standard armboard pads, each pad measures 590mm (Length) x 190mm (Width) x 50mm (Height) and are designed to be used on a standard reusable table or positioning pads. As with all our disposable products, we can provide custom solutions to suit any need, please talk to us for further information. -
Hydraulic Mayo Table
Made of 304-grade stainless steel, this lift system features a double-acting, high-precision hydraulic pump. It operates through a pedal and comes with 3 twin castors.This product has multiple variants. The options may be chosen on the product page -
Bowl Stands
Hipac's Australian-made Stainless Steel Bowl Stand features a polymer base and is designed to hold a 300mm diameter bowl. Available in single and double stands, it offers flexibility to healthcare settings. Bowls are sold separately, and the stand measures 560mm(L) x 560mm(W) x 850mm(H). Feel free to reach out to us and explore the options we offer for customising and creating unique products to meet your specific requirements.This product has multiple variants. The options may be chosen on the product page -
Side Rail Kit
This product has multiple variants. The options may be chosen on the product page- Designed to suit Skytron 3600, 3500 and 6700 Series operating tables.
- Available for other table models. Contact us with your specific requirements.
-
Tubular Body Support
- Simple vertical and horizontal adjustment.
- Requires one Size 34 Clamp for mounting
- Requires pad. Pad sold separately. Replacement pads can be found here: Tubular Body Support Pads.
-
Debello Lateral Hip Positioner Set
The Debello Lateral Hip Positioner is a patient positioning device that assists the surgical team in correctly positioning patients for hip surgery while providing improved access around the patient and operative site. This is achieved by the ability to reduce the length of the lateral bars for larger patients without limiting the use of the device to support smaller patients. The support incorporates three seamless, vinyl-covered foam pads designed to provide a reduced risk of pressure injury when compared with traditional hip positioning pads.- Assists the surgical team in correctly positioning the patient for hip surgery.
- Improves access around the patient and operative site.
- Integrated lateral end stops.
- Pads are included. Replacement seamless vinyl-covered foam pads are available, reducing the risk of pressure injuries: Debello Lateral Hip Positioner Pads.
- Horizontal and vertical adjustment.
- Requires two size 16 clamps for mounting.
- Pole length 450mm (can be shortened by 200mm).
-
Disposable Stacked Head Ring
Designed for use with standard reusable tables or positioning pads, the Hipac single use, non-sterile stacked head rings are manufactured in Australia from high quality foam materials. As single use items, they minimise the risk of cross contamination and avoid the time and expense of cleaning for rapid turnaround of equipment. Supplied in a carton of 12 single use attacked head rings, they are ideal for any medical facility. -
Vitesse K9500 Anti-Ligature Flexible Curtain Tracking
The Vitesse K9500 Flexible Curtain Tracking system is made of shatterproof plastic, designed to be flexible enough to prevent it from being used as a weapon by violent patients or prisoners. The system is attached to the ceiling or wall with Kestrel magnetic load release brackets, ensuring that if an abnormal load is applied to the track, it will release and remove any ligature points. The tracking can be easily refitted after the event by placing it back onto the magnetic brackets. This product is recommended for use with lightweight curtains and where violence risks preclude the use of Vitesse K6200 Aluminium Track. The system includes 16 gliders per metre and is available with magnetic wall-fix or top-fix brackets. -
Concealed Door Closer
The requirements of anti-ligature installations and those of door closers invariably contradict each other. The necessity of a linkage between the door and the frame always creates a ligature point when the door is open. One of the best compromises is the Perko Powermatic concealed door closer. Operating at power size 3, with adjustable closing and latching speeds, this unit has a concealed jam mounted configuration making it a less obvious ligature risk. While a ligature risk will always be present with this model of door closer, it can be minimised by installing it at as little as 300mm above floor level. -
Gel Donut Head Pad
This product has multiple variants. The options may be chosen on the product page- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Accessory Storage Trolley
- Designed to store table accessories in pre-configured locations.
- Positioning devices stored in base or attached via clamps.
- A size rails as standard. Can be manufactured to suit any rail size and storage requirements. Contact us with your specific requirements.
-
Hipac Anti-Ligature Roller Blind System
Hipac's Anti-Ligature Roller Blind System offers a safe and durable solution for facilities in need of ligature-free options. With the slow-rise mechanism, the blinds open smoothly, while the magnetic suspension brackets eliminate any potential ligature points. The system can be easily refitted after any abnormal load is detected, ensuring continued safety and security. -
Moulded Heavy Duty Door Stop
The Moulded Heavy Duty Door Stop is constructed from a durable rubber material that can withstand heavy impact. It is designed to restrict the opening angle of the door or prevent the door from hitting the wall. This doorstop is resistant to vandalism and patient tampering and is flame resistant. It can be mounted on the floor or wall, making it a versatile solution for different applications. -
Lithotomy Leg Holders
- Stainless steel construction.
- Requires two size 16 clamps for mounting.
- Requires pads and straps, sold separately.
- Replacement pads and straps can be found here: Lithotomy Leg Holder Pads.
- Disposable Lithotomy Straps are recommended for the safe positioning of the patient.
- Sold in pairs.
-
Perineal Cutout Filler
This product has multiple variants. The options may be chosen on the product page- Fits over the perineal cutout to provide support when not in use.
- Designed to suit Skytron and Amsco/Steris operating tables.
-
Gel Lateral Positioner
- Consists of a vinyl covered foam support with removable gel sheet.
- Protects arm and shoulder in lateral positioning.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-
Nestable Table (Medium)
Australian Made 304 Grade Stainless Steel Table with four precision ball bearing castors. Designed to fit between our Large and Small Nestable Tables for a compact and modular storage solution in the Nestable Tables Set. Measurements: 940mm(L) x 510mm(W) x 870mm(H) Shelf: 50kg weight capacity. -
IV Pole Vertical Oxygen Bottle Holder and Clamp
Hipac’s IV Pole Vertical Oxygen Bottle Holder is designed to securely hold C-size oxygen bottles and comes with a clamp that fits on any Hipac IV Pole. This high-quality stainless-steel holder ensures your oxygen bottle is securely in place. Feel free to reach out to us and explore the options we offer for customising and creating unique products to meet your specific requirements. -
Removable Door Stop, Aluminium
The Aluminium Removable Door Stop provides an effective solution to prevent barricade attempts in combination with a double swing hinge. While the door is in normal use, the stop stays locked to the door frame and acts as a traditional stop to prevent the door from swinging outward. In the case of a barricade, the stop can be unlatched from the frame using a key and opened outward to enable the door to swing away from the obstruction. Available in right or left-handed configuration, the door stop comes in 2100mm and 2400mm lengths and requires a 4mm key. This door stop is rigorously tested to Level B4 TS001 Grade.This product has multiple variants. The options may be chosen on the product page -
Mayo Table – 4 Leg Base
Australian Made 304 Grade Stainless Steel Mayo Table with Four Leg Base. Adjustable Height: 820 - 1120mm Tray Size: 560(L) x 410mm(W) Castors: 4x 50mm Non-Locking Castors -
Adjustable Mayfield Adaptor
- Adaptor to attach Mayfield head frame to operating table.
- Slides over side rails.
- Locks securely in place with wrist screws.
-
Heavy Duty Lift Assisted Leg Holders / Stirrups
- 360kg patient weight capacity.
- Gas lift assisted stirrups.
- 120 degree boot rotation.
- Handle controlled abduction and adduction.
- Pad set included. Replacement pads can be found here: Stirrup Replacement Pads.
- Requires two size 33 clamps for mounting. We recommend using the Stirrup Clamp.
-
Small Instrument Trolleys with Rails
Our Australian-made instrument trolley is crafted from durable 304 grade stainless steel and features four precision ball bearing castors for smooth mobility. You have the option to choose from models with or without side rails, as well as with or without a bottom shelf. Each shelf has a weight capacity of 50kg, providing ample support for your equipment and supplies.This product has multiple variants. The options may be chosen on the product page -
Narrow Rotatable Lateral Support
- Vertical, horizontal and rotational adjustment.
- Can be used as shoulder rests when purchased as a pair.
- Size 17 vertical post.
- Requires one Size 17 Clamp for mounting.
- Requires Pad. Sold separately. Replacement Pads can be found here: Narrow Rotatable Lateral Support Pads.
-
Nestable Table (Large)
Australian Made 304 Grade Stainless Steel Table with four precision ball bearing castors. Designed to fit over our Small and Medium Nestable Tables for a compact and modular storage solution in the Nestable Tables Set. Measurements: 1000mm(L) x 600mm(W) x 900mm(H). Shelf: 50kg weight capacity -
Mayo Table – Raised 3 Leg Base
Australian Made 304 Grade Stainless Steel Mayo Table with Two Leg Flat Base. Adjustable Height: 820 - 1120mm Tray Size: 560(L) x 410mm(W) Castors: 2x 50mm Non-Locking Castors -
Disposable Heel Cup
An effective patient positioner that minimises the risk of cross contamination and avoids the expense and time of cleaning, the Hipac single use heel cup is non-sterile and perfect for high traffic environments. Made in Australia, they should be used with a standard reusable table or positioning pads and are offered in cartons of 24 pairs of single use heel cups. As with all our disposable products, we can provide custom solutions to suit any need, please talk to us for further information. -
Nestable Tables Set
Set of 3 Australian Made 304 Grade Stainless Steel Tables with four precision ball bearing castors (per trolley). Shelf: 50kg weight capacity. Measurements: 1x Large - 1000mm(L) x 600mm(W) x 900mm(H) 1x Medium - 940mm(L) x 510mm(W) x 870mm(H) 1x Small - 760mm(L) x 500mm(W) x 830mm(H) -
Universal Stirrup Trolley
- Stainless Steel construction with a polymer base.
- Accepts most brands of lift assisted leg holders.
- Holds one pair of leg holders.
-
Lateral Hip Positioner Replacement Pads
This product has multiple variants. The options may be chosen on the product page- Replacement Pad Assembly to suit Lateral Hip Positioner.
- Latex-free.
-
Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -
Orthopaedic Hip Rest
• Designed to suit Amsco/Steris and 777 orthopaedic traction frames. • Radiolucent carbon fibre construction. • Requires pad, pad sold separately. Replacement pads can be found here: Orthopaedic Hip Rest
