“Surgical Table Arm Guard Pad” has been added to your cart. View cart
You may be interested in…
-

Full Mortice Continuous Geared Hinge
The Full Mortice Continuous Geared Hinge is a robust solution for single swing doors. The interlocking gears provide high strength and smooth operation, reducing maintenance costs over the life cycle of the hinge. The continuous design of the hinge eliminates gaps and enhances privacy for patients. It also prevents the door from dropping and addresses door alignment issues. Made of aluminium, this hinge is durable.This product has multiple variants. The options may be chosen on the product page -



Wide Armboard
- Radiolucent top.
- Height adjustable.
- Requires two size 16 clamps for mounting.
- Requires pad, pad sold separately. Replacement pads can be found here: Wide Armboard Pad.
-



Disposable Prone Anaesthetic Pillow
A single-use, non-sterile pillow that streamlines the maintenance process, both minimising any risk of cross-contamination and the expense of cleaning. With a twin layer for comfort and provision for tubing, it is manufactured right here in Australia. Offered in a pack of 12 pillows, they must be used in conjunction with a standard reusable table or positioning pads. Measurements: 265(L) x 235(W) x 175mm(H). We can offer custom options for this product depending on your needs. -



Anti-Ligature Ensuite Doorset
The Hipac load release anti-ligature ensuite doorset is specifically designed for "at-risk" patient environments like mental health facilities. Balancing privacy and safety, these saloon-style doors will detach if abnormal loads are applied, ensuring patient well-being and dignity. The magnetic mounting system allows normal opening/closing and privacy return but releases in ligature attempts. Waterproof and durable, these lightweight doors minimize the risk of being used as weapons. They can be interchanged for room personalization and temporarily removed by staff during aggressive behaviour. Quick and easy retrofitting to new or existing frames minimizes downtime, with installations coordinated to avoid room closures beyond a few hours. Features:- Lightweight door leaves
- Magnetic load release mounting system
- Doors are designed to return to the closed position for added privacy
- Optional Staff key door leaf reinstatement
- Interchangeable door leaves with multiple designs available
-



Kestrel Polycarbonate Wardrobe Rail
The Kestrel Polycarbonate Wardrobe Rail offers the expected convenience of a traditional wardrobe rail with added safety features. If an abnormal load is applied, such as an attempted ligature, the magnetic brackets will release, preventing a successful ligature. After the event, the rail can be easily reattached to the magnetic brackets. This rail is made of a lightweight clear polycarbonate tube, which reduces the risk of it being used as a weapon or hiding contraband.This product has multiple variants. The options may be chosen on the product page -



Emergency Pull Handle
The Emergency Pull Handle is a vital accessory in any healthcare facility with anti-barricade doors. It provides additional grip to overcome any internal force generated by a patient holding the handle from the inside of the door, preventing clinical staff access. By sliding the Emergency Pull Handle over the pinch grip handle, the door can be opened outwardly by pulling it. The length of the handle is designed to allow multiple staff members to participate in pulling the door, ensuring swift entry to the barricaded room. The Emergency Pull Handle is compatible only with 729 handles. -



Sure Grip Anti-Ligature Handle
The Sure Grip Anti-Ligature Pull Handle is a contemporary handle designed in collaboration with architects, clinical staff, and service users to offer durability, comfort, and modern aesthetics. It has an invisible backplate that blends seamlessly with the door, providing a more normalised environment in mental health facilities without compromising on durability or ease of installation. -



Flush Pull Handle, Round
The Flush Pull Handle in a 40mm round shape, is designed to be recessed for a sleek finish. Made of high-quality satin stainless steel with concealed screws, this handle is both durable and visually appealing. Choose from various shapes including the square and rectangle to fit the specific requirements of your facility. -



Surgical Table Arm Guard
- Fully radiolucent.
- Slips under table mattress and is supported by patient weight.
- Requires pad, sold separately. Replacement pads are available Vinyl Pad, Gel Pad.
-



Gel Heel Cup
- Sold individually.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Disposable Body Support Bolster
A single use, non-sterile body support bolster manufactured in Australia from high quality foam. Avoiding the risk of cross contamination and the time and expense of cleaning maintenance, they are perfect for busy theatres and offer an economical alternative. Supplied in a carton of 12 singe use body support bolsters, each is 450mm (Length) x 175mm (Diameter) x 88mm (Height). -



Gel Prone Headrest with Interchangeable Base
- Including three different heights to provide more customised positioning.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Kestrel Toilet Roll Holder, White Plastic
The Kestrel Toilet Roll Holder in white plastic is a reliable and safe solution for facilities concerned about ligature risks. It functions as a traditional toilet roll holder but has a magnetic bracket that allows the holder to release and drop away in the event of an abnormal load, such as an attempted ligature. The holder can be easily reattached to the magnetic bracket after the incident. -



Double Swing Full Length Geared Hinge
The Double Swing Full Length Geared Hinge provides a practical solution for doors that require 90-degree swings in either direction. It is often paired with a detachable door stop to prevent barricading and allow the door to swing freely. Its continuous design eliminates the gaps between the door and frame, reducing ligature risks. This hinge is a durable alternative to pivots and can be cut to suit the door length. It can also be used with the floor-mounted door closer for a complete door security system. This hinge has passed Level B4 TS001 Grade testing.This product has multiple variants. The options may be chosen on the product page -



Gel Elbow Pad
- Positions and cradles the elbow to relieve pressure.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Wide Lateral Support Pads
This product has multiple variants. The options may be chosen on the product page- Made to suit Wide Lateral Support.
- Two pad types available: flat or curved.
- Seamless vinyl-covered foam.
-



Slip In Side Support Pad
- Replacement Pad to suit Slip Side Support
-



Pinch Grip Anti-Ligature Handles
The Primera '729' Pinch Grip anti-ligature handle is a well-known design icon in the mental healthcare industry. Its stylish and sleek lines are popular among interior designers who aim to create welcoming environments. This design has been a staple in the Primera range since its beginning and is suitable for applications where manual dexterity is not a major consideration, such as elderly or infirm patients. The '729' has been purpose-designed and DHF TS001 tested, achieving the highest level (Grade 4) like all Primera products. The back plates are made from 3mm electro-plated steel, available in either radius or square format, with pin torx anti-tamper fixings included. Bolt-through fixings are also available for an additional fee.This product has multiple variants. The options may be chosen on the product page -



Disposable Body Support Roll
A single use, non-sterile body support roll manufactured in Australia from high quality foam. Avoiding the risk of cross contamination and the time and expense of cleaning maintenance, they are perfect for busy theatres and offer an economical alternative. Supplied in a carton of 12 singe use body support rolls, each roll is 450mm (Length) x 175mm (Diameter). -



-



Dome Wall Stop
The Dome Wall Stop is a safety feature designed to prevent patient self-harm. Made from soft rubber with a 304-grade stainless steel surround, its sloped design eliminates ligature points. The fixing screw is hidden to prevent tampering by patients. This safety feature is durable and can withstand harsh environments, making it ideal for mental health facilities, hospitals, and other high-risk environments. -



Concealed Door Closer
The requirements of anti-ligature installations and those of door closers invariably contradict each other. The necessity of a linkage between the door and the frame always creates a ligature point when the door is open. One of the best compromises is the Perko Powermatic concealed door closer. Operating at power size 3, with adjustable closing and latching speeds, this unit has a concealed jam mounted configuration making it a less obvious ligature risk. While a ligature risk will always be present with this model of door closer, it can be minimised by installing it at as little as 300mm above floor level. -



Surgical Arm Table
- Radiolucent top.
- Height adjustable telescopic leg provides additional support.
- Requires two size 16 clamp for mounting.
- Requires pad, pad sold separately. Replacement pads can be found here: Surgical Arm Table Pad.
-



Disposable Patient Care Kit to suit Jackson Table
A complete, single use patient care kit designed for use with the Jackson Table. Manufactured in Australia, they minimise the risk of cross contamination and avoid extensive cleaning.This product has multiple variants. The options may be chosen on the product page -



Hourglass Arm Table
- Radiolucent top.
- Height adjustable telescopic leg provides additional support.
- Requires two size 16 clamps for mounting.
- Requires pad, sold separately. Replacement pads can be found here: Hourglass Arm Table Pad.
-



Gel Table Pad Head Section
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Gel Oval Ulnar/Brachial Protector
- Protects elbow and is secured with hook and loop.
- Allows full view of arm.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Cardiac Head Pillow
This product has multiple variants. The options may be chosen on the product page- Memory foam top with comfort series vinyl.
-



Anaesthetic Trolley – Deluxe
Australian Made 304 Grade Stainless Steel Trolley with two side shelves, key lock, soft closing drawers, side and back rails and four precision ball bearing castors. Trolley Measurements: 900mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 2x 75mm(D), 2x 100mm(D), 2x 150mm(D) x 600mm(W). Shelves: 50kg weight capacity per shelf Castors: 2 x 125mm Non-Locking Castors 2 x 125mm Locking Castors -



Gel Clam Shell Heel Protector
- Wraps around the patient's foot to protect the heel.
- Hook and Loop Closure.
- Easy to use and clean.
- Latex & Silicone Free
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Gel Supine Head Pad with Dish
This product has multiple variants. The options may be chosen on the product page- Self centering dish, conforms to the patient's head while offering support.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear
- Aides in Pressure Redistribution.
-



Anaesthetic Trolley – Classic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 600mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 1x 250mm(D), 3x 125mm(D) Shelf: 50kg weight capacity Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -



Resuscitation Trolley – Combo
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 4x 125mm(D) Half Drawers, 1x 125mm(D) Full Width Drawer Shelves: 50kg weight capacity per shelf Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -



Round Lateral Support Pad
- Replacement Pad made to suit Round Lateral Support.
- Seamless Pad.
-



Disposable Stacked Head Ring
Designed for use with standard reusable tables or positioning pads, the Hipac single use, non-sterile stacked head rings are manufactured in Australia from high quality foam materials. As single use items, they minimise the risk of cross contamination and avoid the time and expense of cleaning for rapid turnaround of equipment. Supplied in a carton of 12 single use attacked head rings, they are ideal for any medical facility. -



Donut Head Ring
This product has multiple variants. The options may be chosen on the product page- Seamless vinyl coated foam head ring.
-



Elephants Trunk Pull Handle
The Elephants Trunk Pull Handle is a robust and solid cast product designed for applications where manual dexterity is a primary concern. Its sleek design provides a stylish alternative to the commonly known 'Witches Nose' handle. This handle comes in two back-plate options, the first being a flat plate for either new doors or retrofit applications, while the second is mounted on a recessed dish, providing more available space behind the handle but requiring more detailed door preparation prior to installation. Although not DHF TS001 compliant, it's suitable for applications where there is less challenging behaviour or installed with back-to-back bolt-through fixings. Its dimensions are 205mm x 90mm x 3mm, and it's tested to Level B4 TS001 Grade for anti-ligature purposes.This product has multiple variants. The options may be chosen on the product page -



Resuscitation Trolley – Deluxe
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 6x 125mm(D) Half Drawers, 1x 250mm(D) Full Width Drawer Shelf: 50kg weight capacity Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -



Gel Concave Armboard Pad
This product has multiple variants. The options may be chosen on the product page- Contoured for multi direction support.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Removable Door Stop, Aluminium
The Aluminium Removable Door Stop provides an effective solution to prevent barricade attempts in combination with a double swing hinge. While the door is in normal use, the stop stays locked to the door frame and acts as a traditional stop to prevent the door from swinging outward. In the case of a barricade, the stop can be unlatched from the frame using a key and opened outward to enable the door to swing away from the obstruction. Available in right or left-handed configuration, the door stop comes in 2100mm and 2400mm lengths and requires a 4mm key. This door stop is rigorously tested to Level B4 TS001 Grade.This product has multiple variants. The options may be chosen on the product page -



Resuscitation Trolley – Classic
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 750mm(L) x 490mm(W) x 900mm(H) Drawer Measurements: 2x 125mm(D) Half Drawers Shelves: 50kg weight capacity per shelf Castors: 2x 125mm Non-Locking Castors on back 2x 125mm Locking Castors on front -



Gel Hand Protector
- Encloses hand and secures with hook and loop straps.
- Latex & Silicone Free.
- Anti-bacterial & Anti-microbial.
- Radiolucent & MRI Safe.
- Won't Leak if Punctured.
- Won't Bottom Out.
- Reduces Friction & Shear.
- Aides in Pressure Redistribution.
-



Multi Drawer Trolley
Australian Made 304 Grade Stainless Steel Instrument Trolley with a soft closing drawer, side and back rails and four precision ball bearing castors. Trolley Measurements: 900mm(L) x 490mm(W) x 900mm(H). Drawer Measurements: 4x 100mm(D), 2x 150mm(D). Shelf: 50kg weight capacity. Castors: 2x 125mm Non-Locking Castors on back. 2x 125mm Locking Castors on front. -



Disposable Face Rest Covers to suit Epidural Positioning Device
Our Sani-Cover Medical Grade Disposable Face Rest Covers are designed for use with our Epidural Positioning Device (EPD) or for any crescent-shaped face rest cushion. The 25 gsm, spunbound fabric provides a comfortable, sanitary barrier for the face during care and treatment. Latex-free elastic ensures the cover remains in place but allows for quick and easy changeover between patients. The Face Rest Covers also fit the Epidural Positioning Device (EPD) arm rest. Sold in packs of 50.
